You are looking at historical revision 14119 of this page. It may differ significantly from its current revision.
An implementation of syntax-rules and a hygienic low-level macro system.
This extension provides sc-macro-transformer, described below; er-macro-transformer, as described in Hygienic Macros Through Explicit Renaming by Will Clinger; and rsc-macro-transformer, which is like sc-macro-transformer but with the usage and transformer environments swapped.
A Syntactic Closures Macro Facility by Chris Hanson 9 November 1991
This document describes "syntactic closures", a low-level macro facility for the Scheme programming language. The facility is an alternative to the low-level macro facility described in the `Revised^4 Report on Scheme.' This document is an addendum to that report.
The syntactic closures facility extends the BNF rule for TRANSFORMER SPEC to allow a new keyword that introduces a low-level macro transformer:
TRANSFORMER SPEC := (sc-macro-transformer EXPRESSION)
Additionally, the following procedures are added: make-syntactic-closure capture-syntactic-environment identifier? identifier=?
The description of the facility is divided into three parts. The first part defines basic terminology. The second part describes how macro transformers are defined. The third part describes the use of "identifiers", which extend the syntactic closure mechanism to be compatible with `syntax-rules'.
188.8.131.52 Terminology ...................
This section defines the concepts and data types used by the syntactic closures facility.
* "Forms" are the syntactic entities out of which programs are recursively constructed. A form is any expression, any definition, any syntactic keyword, or any syntactic closure. The variable name that appears in a `set!' special form is also a form. Examples of forms:
17 #t car (+ x 4) (lambda (x) x) (define pi 3.14159) if define
* An "alias" is an alternate name for a given symbol. It can appear anywhere in a form that the symbol could be used, and when quoted it is replaced by the symbol; however, it does not satisfy the predicate `symbol?'. Macro transformers rarely distinguish symbols from aliases, referring to both as identifiers.
* A "syntactic" environment maps identifiers to their meanings. More precisely, it determines whether an identifier is a syntactic keyword or a variable. If it is a keyword, the meaning is an interpretation for the form in which that keyword appears. If it is a variable, the meaning identifies which binding of that variable is referenced. In short, syntactic environments contain all of the contextual information necessary for interpreting the meaning of a particular form.
* A "syntactic closure" consists of a form, a syntactic environment, and a list of identifiers. All identifiers in the form take their meaning from the syntactic environment, except those in the given list. The identifiers in the list are to have their meanings determined later. A syntactic closure may be used in any context in which its form could have been used. Since a syntactic closure is also a form, it may not be used in contexts where a form would be illegal. For example, a form may not appear as a clause in the cond special form. A syntactic closure appearing in a quoted structure is replaced by its form.
184.108.40.206 Transformer Definition ..............................
This section describes the `sc-macro-transformer' special form and the procedures `make-syntactic-closure' and `capture-syntactic-environment'.
-- Syntax: transformer expression Syntax: It is an error if this syntax occurs except as a TRANSFORMER SPEC.
Semantics: The EXPRESSION is evaluated in the standard transformer environment to yield a macro transformer as described below. This macro transformer is bound to a macro keyword by the special form in which the `sc-macro-transformer' expression appears (for example, `let-syntax').
A "macro transformer" is a procedure that takes two arguments, a form and a syntactic environment, and returns a new form. The first argument, the "input form", is the form in which the macro keyword occurred. The second argument, the "usage environment", is the syntactic environment in which the input form occurred. The result of the transformer, the "output form", is automatically closed in the "transformer environment", which is the syntactic environment in which the `sc-macro-transformer' expression occurred.
For example, here is a definition of a push macro using `syntax-rules':
(define-syntax push (syntax-rules () ((push item list) (set! list (cons item list)))))
Here is an equivalent definition using `sc-macro-transformer': (define-syntax push (sc-macro-transformer (lambda (exp env) (let ((item (make-syntactic-closure env '() (cadr exp))) (list (make-syntactic-closure env '() (caddr exp)))) `(set! ,list (cons ,item ,list))))))
In this example, the identifiers `set!' and `cons' are closed in the transformer environment, and thus will not be affected by the meanings of those identifiers in the usage environment `env'.
Some macros may be non-hygienic by design. For example, the following defines a loop macro that implicitly binds `exit' to an escape procedure. The binding of `exit' is intended to capture free references to `exit' in the body of the loop, so `exit' must be left free when the body is closed:
(define-syntax loop (sc-macro-transformer (lambda (exp env) (let ((body (cdr exp))) `(call-with-current-continuation (lambda (exit) (let f () ,@(map (lambda (exp) (make-syntactic-closure env '(exit) exp)) body) (f))))))))
To assign meanings to the identifiers in a form, use `make-syntactic-closure' to close the form in a syntactic environment.
-- Function: make-syntactic-closure environment free-names form ENVIRONMENT must be a syntactic environment, FREE-NAMES must be a list of identifiers, and FORM must be a form. `make-syntactic-closure' constructs and returns a syntactic closure of FORM in ENVIRONMENT, which can be used anywhere that FORM could have been used. All the identifiers used in FORM, except those explicitly excepted by FREE-NAMES, obtain their meanings from ENVIRONMENT.
Here is an example where FREE-NAMES is something other than the empty list. It is instructive to compare the use of FREE-NAMES in this example with its use in the `loop' example above: the examples are similar except for the source of the identifier being left free. (define-syntax let1 (sc-macro-transformer (lambda (exp env) (let ((id (cadr exp)) (init (caddr exp)) (exp (cadddr exp))) `((lambda (,id) ,(make-syntactic-closure env (list id) exp)) ,(make-syntactic-closure env '() init))))))
`let1' is a simplified version of `let' that only binds a single identifier, and whose body consists of a single expression. When the body expression is syntactically closed in its original syntactic environment, the identifier that is to be bound by `let1' must be left free, so that it can be properly captured by the `lambda' in the output form.
To obtain a syntactic environment other than the usage environment, use `capture-syntactic-environment'.
-- Function: capture-syntactic-environment procedure `capture-syntactic-environment' returns a form that will, when transformed, call PROCEDURE on the current syntactic environment. PROCEDURE should compute and return a new form to be transformed, in that same syntactic environment, in place of the form.
An example will make this clear. Suppose we wanted to define a simple `loop-until' keyword equivalent to
(define-syntax loop-until (syntax-rules () ((loop-until id init test return step) (letrec ((loop (lambda (id) (if test return (loop step))))) (loop init)))))
The following attempt at defining `loop-until' has a subtle bug: (define-syntax loop-until (sc-macro-transformer (lambda (exp env) (let ((id (cadr exp)) (init (caddr exp)) (test (cadddr exp)) (return (cadddr (cdr exp))) (step (cadddr (cddr exp))) (close (lambda (exp free) (make-syntactic-closure env free exp)))) `(letrec ((loop (lambda (,id) (if ,(close test (list id)) ,(close return (list id)) (loop ,(close step (list id))))))) (loop ,(close init '())))))))
This definition appears to take all of the proper precautions to prevent unintended captures. It carefully closes the subexpressions in their original syntactic environment and it leaves the `id' identifier free in the `test', `return', and `step' expressions, so that it will be captured by the binding introduced by the `lambda' expression. Unfortunately it uses the identifiers `if' and `loop' within that `lambda' expression, so if the user of `loop-until' just happens to use, say, `if' for the identifier, it will be inadvertently captured.
The syntactic environment that `if' and `loop' want to be exposed to is the one just outside the `lambda' expression: before the user's identifier is added to the syntactic environment, but after the identifier loop has been added. `capture-syntactic-environment' captures exactly that environment as follows:
(define-syntax loop-until (sc-macro-transformer (lambda (exp env) (let ((id (cadr exp)) (init (caddr exp)) (test (cadddr exp)) (return (cadddr (cdr exp))) (step (cadddr (cddr exp))) (close (lambda (exp free) (make-syntactic-closure env free exp)))) `(letrec ((loop ,(capture-syntactic-environment (lambda (env) `(lambda (,id) (,(make-syntactic-closure env '() `if) ,(close test (list id)) ,(close return (list id)) (,(make-syntactic-closure env '() `loop) ,(close step (list id))))))))) (loop ,(close init '())))))))
In this case, having captured the desired syntactic environment, it is convenient to construct syntactic closures of the identifiers `if' and the `loop' and use them in the body of the `lambda'.
A common use of `capture-syntactic-environment' is to get the transformer environment of a macro transformer:
(sc-macro-transformer (lambda (exp env) (capture-syntactic-environment (lambda (transformer-env) ...))))
220.127.116.11 Identifiers ...................
This section describes the procedures that create and manipulate identifiers. Previous syntactic closure proposals did not have an identifier data type - they just used symbols. The identifier data type extends the syntactic closures facility to be compatible with the high-level `syntax-rules' facility.
As discussed earlier, an identifier is either a symbol or an "alias". An alias is implemented as a syntactic closure whose "form" is an identifier:
(make-syntactic-closure env '() 'a) => an "alias"
Aliases are implemented as syntactic closures because they behave just like syntactic closures most of the time. The difference is that an alias may be bound to a new value (for example by `lambda' or `let-syntax'); other syntactic closures may not be used this way. If an alias is bound, then within the scope of that binding it is looked up in the syntactic environment just like any other identifier.
Aliases are used in the implementation of the high-level facility `syntax-rules'. A macro transformer created by `syntax-rules' uses a template to generate its output form, substituting subforms of the input form into the template. In a syntactic closures implementation, all of the symbols in the template are replaced by aliases closed in the transformer environment, while the output form itself is closed in the usage environment. This guarantees that the macro transformation is hygienic, without requiring the transformer to know the syntactic roles of the substituted input subforms.
-- Function: identifier? object Returns `#t' if OBJECT is an identifier, otherwise returns `#f'. Examples:
(identifier? 'a) => #t (identifier? (make-syntactic-closure env '() 'a)) => #t (identifier? "a") => #f (identifier? #\a) => #f (identifier? 97) => #f (identifier? #f) => #f (identifier? '(a)) => #f (identifier? '#(a)) => #f
The predicate `eq?' is used to determine if two identifers are "the same". Thus `eq?' can be used to compare identifiers exactly as it would be used to compare symbols. Often, though, it is useful to know whether two identifiers "mean the same thing". For example, the `cond' macro uses the symbol `else' to identify the final clause in the conditional. A macro transformer for `cond' cannot just look for the symbol `else', because the `cond' form might be the output of another macro transformer that replaced the symbol `else' with an alias. Instead the transformer must look for an identifier that "means the same thing" in the usage environment as the symbol `else' means in the transformer environment.
-- Function: identifier=? environment1 identifier1 environment2 identifier2 ENVIRONMENT1 and ENVIRONMENT2 must be syntactic environments, and IDENTIFIER1 and IDENTIFIER2 must be identifiers. `identifier=?' returns `#t' if the meaning of IDENTIFIER1 in ENVIRONMENT1 is the same as that of IDENTIFIER2 in ENVIRONMENT2, otherwise it returns `#f'. Examples:
(let-syntax ((foo (sc-macro-transformer (lambda (form env) (capture-syntactic-environment (lambda (transformer-env) (identifier=? transformer-env 'x env 'x))))))) (list (foo) (let ((x 3)) (foo)))) => (#t #f)
(let-syntax ((bar foo)) (let-syntax ((foo (sc-macro-transformer (lambda (form env) (capture-syntactic-environment (lambda (transformer-env) (identifier=? transformer-env 'foo env (cadr form)))))))) (list (foo foo) (foobar)))) => (#f #t)
The syntactic closures facility was invented by Alan Bawden and Jonathan Rees. The use of aliases to implement `syntax-rules' was invented by Alan Bawden (who prefers to call them "synthetic names"). Much of this proposal is derived from an earlier proposal by Alan Bawden.
Alan Bawden and Chris Hanson, ported to CHICKEN by Taylor Campbell and felix winkelmann
Copyright (c) 1989-91 Massachusetts Institute of Technology
This material was developed by the Scheme project at the Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science. Permission to copy and modify this software, to redistribute either the original software or a modified version, and to use this software for any purpose is granted, subject to the following restrictions and understandings.
1. Any copy made of this software must include this copyright notice in full.
2. Users of this software agree to make their best efforts (a) to return to the MIT Scheme project any improvements or extensions that they make, so that these may be included in future releases; and (b) to inform MIT of noteworthy uses of this software.
3. All materials developed as a consequence of the use of this software shall duly acknowledge such use, in accordance with the usual standards of acknowledging credit in academic research.
4. MIT has made no warranty or representation that the operation of this software will be error-free, and MIT is under no obligation to provide any services, by way of maintenance, update, or otherwise.
5. In conjunction with products arising from the use of this material, there shall be no use of the name of the Massachusetts Institute of Technology nor of any adaptation thereof in any advertising, promotional, or sales literature without prior written consent from MIT in each case.
- fixing vector output templates that contain pattern variables in syntax-rules (ashinn)
- hygienify define-extension (zb)
- hygienify define-record, define-record-type (zb)
- cond-expand fix, export identifier->symbol (zb)
- hygienify cond-expand, include; export syntax-case, syntax-match? (zbigniew)
- added curried define (zbigniew)
- added rsc-macro-transformer; define-macro now non-hygienic (zbigniew)
- added optional as a replacement for :optional
- uses hygienic implementation of condition-case
- bugfix by Taylor Campbell
- define-record-type doesn't bind record identifier anymore
- fixed bug in let-optionals
- empty list isn't quoted by default anymore
- added fluid-let
- include shows message in verbose mode
- renamed transformer to sc-macro-transformer for compatibility with MIT-Scheme [suggested by Taylor Campbell]
- added SRFI-17 support
- removed (probably) overly restrictive check [suggested by Taylor Campbell]
- added support for line-number info in debug traces by Alex Shinn
- added bugfix for let-syntax by Taylor Campbell, and vector matching by Alex Shinn
- added bugfix by Taylor Campbell
- added cond-expand
- actually works now, thanks to Taylor Campbell
- added suppoer for DSSSL lambda lists (but needs let-optionals yet)
- Initial release