You are looking at historical revision 40793 of this page. It may differ significantly from its current revision.

sdl2

The sdl2 egg provides bindings to Simple DirectMedia Layer version 2 (SDL2). SDL is a popular library used in games and other media-rich software.

The sdl2 egg provides a programmer-friendly, convenient, and CHICKEN-idiomatic interface to SDL2. It takes care of the annoying low-level C stuff for you, so you can focus on making your game.

If a feature you need is not yet available, please file a feature request or contact a maintainer, so we can prioritize adding it.

Project / Source Code Repository
https://gitlab.com/chicken-sdl2/chicken-sdl2
Issue Tracker
https://gitlab.com/chicken-sdl2/chicken-sdl2/issues
Maintainer
John Croisant
License
BSD 2-Clause

Table of Contents

  1. sdl2
  2. Help Wanted!
  3. Requirements
  4. Related Libraries
  5. Installation
    1. Installing on macOS
  6. Usage and Examples
    1. Ensuring Proper Clean Up
  7. Version History
  8. API
    1. About the API
      1. API Stability
      2. Conventions
      3. Enums
      4. The sdl2-internals Module
      5. Struct Memory Management
    2. General Struct Management
    3. Initialization and Clean Up
    4. Color
      1. sdl2:color
      2. sdl2:color Operations
    5. Cursor
      1. Cursor Functions
      2. sdl2:cursor
    6. Display / Video Driver
      1. Display / Video Driver functions
      2. sdl2:display-mode
    7. Event
      1. Event Functions
      2. sdl2:event
      3. sdl2:controller-axis-event
      4. sdl2:controller-button-event
      5. sdl2:controller-device-event
      6. sdl2:display-event
      7. sdl2:dollar-gesture-event
      8. sdl2:drop-event
      9. sdl2:joy-axis-event
      10. sdl2:joy-ball-event
      11. sdl2:joy-button-event
      12. sdl2:joy-device-event
      13. sdl2:joy-hat-event
      14. sdl2:keyboard-event
      15. sdl2:mouse-button-event
      16. sdl2:mouse-motion-event
      17. sdl2:mouse-wheel-event
      18. sdl2:multi-gesture-event
      19. sdl2:quit-event
      20. sdl2:sys-wm-event
      21. sdl2:text-editing-event
      22. sdl2:text-input-event
      23. sdl2:touch-finger-event
      24. sdl2:user-event
      25. sdl2:window-event
    8. Game Controller
      1. sdl2:game-controller
      2. sdl2:game-controller-button-bind
    9. Hints
      1. Hint Functions
    10. Joystick
      1. Joystick Functions
      2. sdl2:joystick
      3. sdl2:joystick-guid
    11. Keyboard
      1. Keyboard Functions
      2. sdl2:keysym
    12. Mouse
    13. OpenGL
      1. OpenGL Functions
      2. sdl2:gl-context
    14. Palette
      1. sdl2:palette
    15. Pixel Format
      1. Pixel Format Functions
      2. sdl2:pixel-format
    16. Rect / Point
      1. Rect / Point Functions
      2. sdl2:rect
      3. sdl2:rect Operations
      4. sdl2:point
      5. sdl2:point Operations
    17. Renderer
      1. Renderer Functions
      2. sdl2:renderer
      3. sdl2:renderer-info
    18. RWops
      1. RWops Functions
      2. sdl2:rwops
    19. Surface
      1. Surface Functions
      2. sdl2:surface
    20. Texture
      1. sdl2:texture
    21. Timer
    22. Touch / Gesture
      1. Touch / Gesture Functions
      2. sdl2:finger
    23. Version
      1. Version Feature Identifiers
      2. Version Functions
    24. Vulkan
      1. Vulkan Functions
    25. Window
      1. Window Functions
      2. sdl2:window
    26. Miscellaneous

Help Wanted!

This egg needs volunteers to help with several things:

If you wish to help in any way, please contact the project maintainer.

Requirements

The sdl2 egg requires Simple DirectMedia Layer version 2.0.0 or higher. It will not work with older versions of SDL.

This egg requires CHICKEN Scheme 4.8 or higher. As of version 0.3.0, this egg is compatible with both CHICKEN 4 and CHICKEN 5.

The unit tests depend on the test egg. Some demos and examples have other dependencies as well.

The sdl2-image egg provides bindings to SDL_image version 2, which provides the ability to load many image formats. It is built to be compatible with the sdl2 egg.

The sdl2-ttf egg provides bindings to SDL_ttf version 2, which provides the ability to render text using TTF, OTF, and FON fonts. It is built to be compatible with the sdl2 egg.

The sdl-base egg provides bindings to older versions of SDL. Its API is not compatible with the sdl2 egg.

Installation

In most cases, you can install the sdl2 egg in the usual way:

chicken-install sdl2

Note: it is normal for the sdl2 egg to take several minutes to install.

The installer will try to automatically determine the SDL2 compiler and linker flags using the sdl2-config command.

In special cases, you may need to set the SDL2_CFLAGS and SDL2_LDFLAGS environment variables to provide the compiler and linker flags (respectively), then try again. For example:

export SDL2_CFLAGS="-I/usr/local/include/SDL2"
export SDL2_LDFLAGS="-L/usr/local/lib -lSDL2"
chicken-install sdl2

These environment variables are needed only when installing the egg itself. They are not needed when compiling or running programs that use the egg.

Installing on macOS

On macOS, the sdl2 egg can be compiled using either UNIX-style libraries (e.g. SDL2 compiled from source or installed via Homebrew) or Mac-style frameworks (e.g. downloaded from the SDL website).

When automatically determining compiler and linker flags on macOS, the installer will first check to see if sdl2-config is available. If it is available, the installer will use it to determine the flags.

If sdl2-config is not available, the installer will check to see if SDL2.framework is available in either the /Library/Frameworks or /System/Library/Frameworks directories. If so, the installer will use the framework.

If the framework is installed in some other directory, or if you want to force using the framework even when sdl2-config is available, set the SDL2_CFLAGS and SDL2_LDFLAGS enviroment variables to tell the compiler where to find the framework:

export SDL2_CFLAGS="-F/path/to/your/frameworks"
export SDL2_LDFLAGS="-F/path/to/your/frameworks -framework SDL2"
chicken-install sdl2

Usage and Examples

It is recommended that you import the sdl2 module using the prefix "sdl2:", like so:

;; Compatible with both CHICKEN 4 and CHICKEN 5.
(cond-expand
 (chicken-4 (use (prefix sdl2 "sdl2:")))
 (chicken-5 (import (prefix sdl2 "sdl2:"))))

(sdl2:set-main-ready!)
(sdl2:init! '(video))
(define window (sdl2:create-window! "Hello, World!" 0 0 600 400))
(sdl2:fill-rect! (sdl2:window-surface window)
                 #f
                 (sdl2:make-color 0 128 255))
(sdl2:update-window-surface! window)
(sdl2:delay! 3000)
(sdl2:quit!)

The demos directory contains small programs demonstrating how to use various features of sdl2. E.g. to compile and run the basics demo:

csc demos/basics.scm
demos/basics

The chicken-sdl2-examples repository contains complete example games and programs made with sdl2.

Ensuring Proper Clean Up

You must make sure to call set-main-ready! and init! (in that order) soon after your program starts, and to call quit! before your program ends. This is especially important if your program enters fullscreen mode, or changes the display brightness or gamma ramp. If your program does not perform proper initialization and clean up, those changes can sometimes linger even after your program has ended, which can be very frustrating for your program's users. It is even possible for the user's computer to become stuck in fullscreen mode, requiring the user to power off their computer, possibly losing important work that they were doing in other programs!

Here is a simple way to ensure that quit! is called before your program ends, whether exitting normally or because an exception occurred:

(cond-expand
 (chicken-4 (use (prefix sdl2 "sdl2:")))
 (chicken-5 (import (prefix sdl2 "sdl2:"))))

;; Initialize SDL
(sdl2:set-main-ready!)
(sdl2:init! '(video)) ;; or whatever init flags your program needs

;; Schedule quit! to be automatically called when your program exits normally.
(on-exit sdl2:quit!)

;; Install a custom exception handler that will call quit! and then
;; call the original exception handler. This ensures that quit! will
;; be called even if an unhandled exception reaches the top level.
(current-exception-handler
 (let ((original-handler (current-exception-handler)))
   (lambda (exception)
     (sdl2:quit!)
     (original-handler exception))))

;; ...
;; ... the rest of your program code ...
;; ...

Version History

0.4.0 (2021-10-15) cursor, display mode, game controller, mouse, and many other features. Added type declarations. Backward incompatible changes.
0.3.0 (2019-02-13)
Ported to be compatible with both CHICKEN 4 and CHICKEN 5. More user-friendly installation process. Bug fixes.
0.2.0 (2016-02-13)
Added 2D accelerated rendering (renderer and texture). Added hints. Added color, point, and rect operations. Performance improvements. Improved integer type checking. Miscellaneous other changes.
0.1.1 (2015-12-22)
Fixed a compile error when compiling with GCC 4.
0.1.0 (2015-12-19)
Initial release.

For more information about what changed in each version, see the CHANGELOG.

API

About the API

API Stability

The sdl2 egg follows semantic versioning. Until version 1.0.0 is released, the maintainer reserves the right to change the API if needed, possibly in ways that break compatibility with previous versions. Large backward incompatible changes are unlikely, but there may be small tweaks and fixes to the API if problems are discovered.

After version 1.0.0 is released, the API is guaranteed to remain stable (no backward-incompatible changes) until the next new major version (e.g. going from version 1.x to 2.0.0, or 2.x to 3.0.0).

Conventions

Enums

The sdl2 egg uses symbols instead of integer constants, for things like event types, keyboard keys, and init flags. It uses lists of symbols instead of bitwise-ior'd integer masks or flags. See the enum tables for details.

Many procedures that return an enum symbol or a list of enum symbols, also have a "raw" version that returns the equivalent integer value. Setters that accept an enum symbol will also accept the corresponding integer value. Setters that accept a list of enum symbols will also accept an integer representing bitwise-ior'd integer flags or masks.

The sdl2-internals Module

The sdl2 egg has two modules: the sdl2 module, which defines the public interface for the library, and sdl2-internals, which defines the "under the hood" code. Most users will only need to use the sdl2 module, but for advanced use cases you may need or want to import specific parts of the sdl2-internals module into your program.

The sdl2-internals module is not an official part of the public API, and does not have the same guarantees of API stability. But, certain parts of the module are safe to use in your programs. For more information, see this guide:

Struct Memory Management

The sdl2 egg has many "struct record types", which are Scheme record types that wrap a pointer to a certain C struct from SDL. For example, the sdl2:surface record type wraps a pointer to an SDL_Surface struct.

Some struct record types have procedures for allocating or freeing an instance of that type. Each type that can be allocated has two "make" procedures:

Certain other procedures that return new struct records also follow this convention, for example load-bmp vs. load-bmp*.

In most cases, it is best to create managed struct records, so that you don't have to worry about manually freeing them. However, in certain advanced use cases, you might require that the struct's underlying pointer address never change. For example, suppose you are storing the pointer address in another C struct. In such cases, you should create an unmanaged struct record, not a memory-managed struct record. Unmanaged struct records will keep the same underlying pointer address throughout their life, but managed struct records may sometimes be moved in memory by the garbage collector. (Most users do not need to worry about this.)

If you create an unmanaged struct record but want to automatically free its memory when it is garbage collected, you can use set-finalizer! with the appropriate "free" procedure. (This is how most, but not all, managed struct records are implemented.) For example:

;; Allocate an unmanaged sdl2:surface.
(let ((my-surf (sdl2:make-surface* 800 600 30)))
  ;; Set a finalizer so it will be automatically freed.
  (set-finalizer! my-surf sdl2:free-surface!))

It is safe to manually free managed struct records. In fact, doing so can be beneficial to your program's memory footprint and performance, because there will be less memory waiting to be freed by the garbage collector. For example:

(let ((my-surf (sdl2:make-surface 800 600 32)))
  ;; ... do stuff with my-surf ...
  ;; Once you are done with my-surf, manually free it.
  (sdl2:free-surface! my-surf))

As soon as you free a struct record, its pointer will be set to null, and it will no longer be usable for most purposes. You cannot get or set its fields, or pass it as an argument to most procedures. So be careful not to free struct records that you still want to use!

Some struct record types, such as sdl2:window, are not managed in this way. Instead, you use certain SDL functions to work with them, such as create-window! and destroy-window!.

General Struct Management

[procedure] (struct-eq? obj1 obj2) → boolean

Returns #t if both objects refer to the same memory location. The objects can be struct record instances, pointers, locatives, or the value #f (equivalent to a null pointer).

This procedure can be used with any struct record type provided by this library, or related libraries such as sdl2-image and sdl2-ttf.

This procedure is the only reliable way to compare the identities of struct records provided by this library or related libraries. Other procedures, such as eq? or equal?, are not guaranteed to work correctly. They may break in the future due to changes in the implementation of struct records.

[procedure] (struct-null? record) → boolean

Returns #t if the given record is a null struct record, i.e. it has a pointer to memory address 0. This procedure can be used with any struct record type provided by this library, or related libraries such as sdl2-image and sdl2-ttf.

A struct record will be null after you manually free its memory, e.g. using free-surface!. Most procedures, including field getters and setters, will signal an exception if you pass a null struct record. So, you can use this procedure to check whether it is safe to use the record.

It is possible for a C function to return a null struct record. But, if a function binding in this library returns a null struct record, that is a bug and should be reported. Function bindings in this library are supposed to return #f instead of a null struct record.

Initialization and Clean Up

[procedure] (set-main-ready!)

See SDL_SetMainReady.

You should call this soon after your program starts, before calling init!. See Ensuring Proper Clean Up.

[procedure] (init! #!optional flags-list)

Initialize SDL. You should call this soon after your program starts, after calling set-main-ready!. See Ensuring Proper Clean Up.

flags-list defaults to '(everything). It must be a list of one or more init flag symbols.

See SDL_Init.

Signals an exception of kind (exn sdl2) if initialization fails.

[procedure] (init-subsystem! flags-list)

See SDL_InitSubSystem.

flags-list must be a list of one or more init flag symbols.

Signals an exception of kind (exn sdl2) if initialization fails.

[procedure] (quit!)

Clean up SDL. You must make sure to call this before your program ends. See Ensuring Proper Clean Up.

See SDL_Quit.

[procedure] (quit-subsystem! flags-list)

See SDL_QuitSubSystem.

flags-list must be a list of one or more init flag symbols.

[procedure] (was-init #!optional flags-list) → list of symbols

See SDL_WasInit.

flags-list defaults to '(everything). It must be a list of one or more init flag symbols.

Color

sdl2:color

sdl2:color is a record type that wraps a pointer to an SDL_Color struct.

[procedure] (color? obj) → boolean
[procedure] (colour? obj) → boolean

Returns #t if obj is an sdl2:color.

[procedure] (make-color #!optional r g b a) → sdl2:color
[procedure] (make-colour #!optional r g b a) → sdl2:color
[procedure] (make-color* #!optional r g b a) → sdl2:color
[procedure] (make-colour* #!optional r g b a) → sdl2:color

Allocate and initialize a new sdl2:color.

r, g, b, and a must be integers in the range 0 to 255 (inclusive). r, g, and b default to 0. a defaults to 255 (full opacity).

[procedure] (free-color! color)
[procedure] (free-colour! color)

Free the memory of the sdl2:color's underlying struct. color's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:colors. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (color-r color) → integer
[procedure] (colour-r color) → integer
[setter] (set! (color-r color) val)
[setter] (set! (colour-r color) val)
[setter] (color-r-set! color val)
[setter] (colour-r-set! color val)

Get or set the sdl2:color's "r" (red) field, as an integer in the range 0 to 255 (inclusive).

[procedure] (color-g color) → integer
[procedure] (colour-g color) → integer
[setter] (set! (color-g color) val)
[setter] (set! (colour-g color) val)
[setter] (color-g-set! color val)
[setter] (colour-g-set! color val)

Get or set the sdl2:color's "g" (green) field, as an integer in the range 0 to 255 (inclusive).

[procedure] (color-b color) → integer
[procedure] (colour-b color) → integer
[setter] (set! (color-b color) val)
[setter] (set! (colour-b color) val)
[setter] (color-b-set! color val)
[setter] (colour-b-set! color val)

Get or set the sdl2:color's "b" (blue) field, as an integer in the range 0 to 255 (inclusive).

[procedure] (color-a color) → integer
[procedure] (colour-a color) → integer
[setter] (set! (color-a color) val)
[setter] (set! (colour-a color) val)
[setter] (color-a-set! color val)
[setter] (colour-a-set! color val)

Get or set the sdl2:color's "a" (alpha) field, as an integer in the range 0 to 255 (inclusive).

sdl2:color Operations

These are operations for efficiently and conveniently working with sdl2:colors. Many of them are implemented in C for efficiency.

[setter] (color-set! color #!optional r g b a) → color
[setter] (colour-set! color #!optional r g b a) → color

Efficient and convenient way of setting multiple fields of the sdl2:color. Any arguments that are #f will cause no change to that field. E.g. (color-set! my-color 42 #f 255 #f) will set the "r" field to 42 and the "b" field to 255, but will not change the "g" or "a" fields. Returns color after it is modified.

[procedure] (color->list color) → list of integers
[procedure] (colour->list color) → list of integers

Returns a list (r g b a) containing the value of each field of the sdl2:color.

[procedure] (color->values color) → [r g b a]
[procedure] (colour->values color) → [r g b a]

Returns multiple values containing the value of each field of the sdl2:color. This is useful for destructuring an sdl2:color using receive or let-values.

[procedure] (color=? color1 color2) → boolean
[procedure] (colour=? color1 color2) → boolean

Efficiently compare two sdl2:colors. Returns #t if the value of every field in color1 is equal to the value of the corresponding field in color2.

[procedure] (color-copy src) → sdl2:color
[procedure] (colour-copy src) → sdl2:color
[procedure] (color-copy! src dest) → dest
[procedure] (colour-copy! src dest) → dest

color-copy and colour-copy efficiently copy the values of src into a new managed sdl2:color. color-copy and colour-copy are available in sdl2 egg 0.2.0 and higher. In earlier versions, they were named copy-color and copy-colour.

color-copy! and colour-copy! efficiently copy the values of src into dest, and return the modified dest. It is safe (but useless) for src and dest to be the same object. color-copy! and colour-copy! are available in sdl2 egg 0.2.0 and higher.

[procedure] (color-scale color factor) → sdl2:color
[procedure] (colour-scale color factor) → sdl2:color
[procedure] (color-scale! color factor #!optional dest) → dest
[procedure] (colour-scale! color factor #!optional dest) → dest

Efficiently multiply the RGBA values of color by factor (a float or integer). E.g. factor 0.5 halves the RGBA values, factor 2.0 doubles the values.

Requires sdl2 egg 0.2.0 or higher.

The results are clamped to the range [0, 255]. sdl2:color can only hold integer values, so the results will be truncated to integers.

[procedure] (color-mult color1 color2) → sdl2:color
[procedure] (colour-mult color1 color2) → sdl2:color
[procedure] (color-mult! color1 color2 #!optional dest) → dest
[procedure] (colour-mult! color1 color2 #!optional dest) → dest

Efficiently multiply-blend color1 with color2. This is equivalent to the "multiply" blend mode of image editors, where color1 is the bottom layer and color2 is the top layer.

Requires sdl2 egg 0.2.0 or higher.

The results are clamped to the range [0, 255]. sdl2:color can only hold integer values, so the results will be truncated to integers.

This operation only affects the R, G, and B values. The result's A value will always be the same as color1's A value.

color2's A value controls the strength of the effect. E.g. 255 means full strength, 127 means half strength, 0 means no effect (the result will have the same values as color1).

[procedure] (color-add color1 color2) → sdl2:color
[procedure] (colour-add color1 color2) → sdl2:color
[procedure] (color-add! color1 color2 #!optional dest) → dest
[procedure] (colour-add! color1 color2 #!optional dest) → dest

Efficiently add-blend color1 with color2. This is equivalent to the "addition" blend mode of image editors, where color1 is the bottom layer and color2 is the top layer.

Requires sdl2 egg 0.2.0 or higher.

The results are clamped to the range [0, 255]. sdl2:color can only hold integer values, so the results will be truncated to integers.

This operation only affects the R, G, and B values. The result's A value will always be the same as color1's A value.

color2's A value controls the strength of the effect. E.g. 255 means full strength, 127 means half strength, 0 means no effect (the result will have the same values as color1).

[procedure] (color-sub! color1 color2 #!optional dest) → dest
[procedure] (colour-sub! color1 color2 #!optional dest) → dest

Efficiently subtract-blend color1 with color2. This is equivalent to the "subtract" blend mode of image editors, where color1 is the bottom layer and color2 is the top layer.

Requires sdl2 egg 0.2.0 or higher.

The results are clamped to the range [0, 255]. sdl2:color can only hold integer values, so the results will be truncated to integers.

This operation only affects the R, G, and B values. The result's A value will always be the same as color1's A value.

color2's A value controls the strength of the effect. E.g. 255 means full strength, 127 means half strength, 0 means no effect (the result will have the same values as color1).

[procedure] (color-lerp color1 color2 t) → sdl2:color
[procedure] (color-lerp! color1 color2 t #!optional dest) → dest
[procedure] (colour-lerp color1 color2 t) → sdl2:color
[procedure] (colour-lerp! color1 color2 t #!optional dest) → dest

Efficient linear interpolation (or extrapolation) between color1 and color2. sdl2:color can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range 0 to 255.

t is the interpolation factor (a float). Values of t between 0 and 1 will interpolate between color1 and color2. Values of t less that 0 will extrapolate beyond color1 (moving away from color2). Values greater that 1 will extrapolate beyond color2 (moving away from color1).

Requires sdl2 egg 0.2.0 or higher.

Cursor

Cursor Functions

[procedure] (create-cursor data mask w h hot-x hot-y) → sdl2:cursor
[procedure] (create-cursor* data mask w h hot-x hot-y) → sdl2:cursor

Create a cursor from pixel and mask data. data and mask must be u8vectors, blobs, locatives, or pointers. See SDL_CreateCursor.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (create-color-cursor surface hot-x hot-y) → sdl2:cursor
[procedure] (create-color-cursor* surface hot-x hot-y) → sdl2:cursor
[procedure] (create-colour-cursor surface hot-x hot-y) → sdl2:cursor
[procedure] (create-colour-cursor* surface hot-x hot-y) → sdl2:cursor

See SDL_CreateColorCursor.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (create-system-cursor enum) → sdl2:cursor
[procedure] (create-system-cursor* enum) → sdl2:cursor

enum must be a system cursor symbol or equivalent integer. See SDL_CreateSystemCursor.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-cursor) → sdl2:cursor
[setter] (set! (get-cursor) cursor)
[setter] (cursor-set! cursor)

Get or set the active cursor. You should not call free-cursor! on the cursor returned by get-cursor. See SDL_GetCursor and SDL_SetCursor.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-default-cursor) → sdl2:cursor

Get the default cursor. See SDL_GetDefaultCursor.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (show-cursor?) → boolean
[procedure] (show-cursor! boolean)
[setter] (set! (show-cursor?) boolean)

See SDL_ShowCursor.

Requires sdl2 egg 0.4.0 or higher.

sdl2:cursor

[procedure] (cursor? obj) → boolean

Returns #t if obj is an sdl2:cursor.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (free-cursor! cursor)

Free the memory of the sdl2:cursor's underlying struct. cursor's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:cursors. It is safe (but has no effect) to free a struct record multiple times.

Requires sdl2 egg 0.4.0 or higher.

Display / Video Driver

Display / Video Driver functions

[procedure] (video-init! #!optional driver-name)

Initialize video with the given driver. driver-name can be omitted or #f to use the default driver. See SDL_VideoInit.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (video-quit!)

See SDL_VideoQuit.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-num-video-drivers) → integer

See SDL_GetNumVideoDrivers.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-video-driver driver-index) → string or #f

See SDL_GetVideoDriver.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-current-video-driver) → string or #f

See SDL_GetCurrentVideoDriver.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-num-video-displays) → integer

See SDL_GetNumVideoDisplays.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-display-name display-index) → string

See SDL_GetDisplayName.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-display-dpi display-index) → [ddpi hdpi vdpi]

Return the diagonal, horizontal, and vertical DPI (dots per inch) of the specified display. This procedure returns multiple values. See SDL_GetDisplayDPI.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-display-bounds display-index) → [w h]

See SDL_GetDisplayBounds.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-display-usable-bounds display-index) → [w h]

See SDL_GetDisplayUsableBounds.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-display-orientation display-index) → symbol
[procedure] (get-display-orientation-raw display-index) → integer

See SDL_GetDisplayOrientation.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-num-display-modes display-index) → integer

See SDL_GetNumDisplayModes.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-display-mode display-index i) → sdl2:display-mode

See SDL_GetDisplayMode.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-current-display-mode display-index) → sdl2:display-mode

See SDL_GetCurrentDisplayMode.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-closest-display-mode display-index target-mode) → sdl2:display-mode

See SDL_GetClosestDisplayMode.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-desktop-display-mode display-index) → sdl2:display-mode

See SDL_GetDesktopDisplayMode.

Requires sdl2 egg 0.4.0 or higher.

sdl2:display-mode

sdl2:display-mode is a record type that wraps a pointer to an SDL_DisplayMode struct.

[procedure] (display-mode? obj) → boolean

Returns #t if obj is an sdl2:display-mode.

[procedure] (make-display-mode #!optional format w h refresh-rate) → sdl2:display-mode
[procedure] (make-display-mode* #!optional format w h refresh-rate) → sdl2:display-mode

Allocate and initialize a new sdl2:display-mode.

format defaults to 'unknown. It must be a pixel format symbol or equivalent integer.

w, h, and refresh-rate default to 0. They must be integers.

[procedure] (free-display-mode! display-mode)

Free the memory of the sdl2:display-mode's underlying struct. display-mode's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:display-modes. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (display-mode-format display-mode) → symbol
[procedure] (display-mode-format-raw display-mode) → integer
[setter] (set! (display-mode-format display-mode) val)
[setter] (display-mode-format-set! display-mode val)

Get or set the sdl2:display-mode's "format" field.

[procedure] (display-mode-w display-mode) → integer
[setter] (set! (display-mode-w display-mode) val)
[setter] (display-mode-w-set! display-mode val)

Get or set the sdl2:display-mode's "w" field, as an integer.

[procedure] (display-mode-h display-mode) → integer
[setter] (set! (display-mode-h display-mode) val)
[setter] (display-mode-h-set! display-mode val)

Get or set the sdl2:display-mode's "h" field, as an integer.

[procedure] (display-mode-refresh-rate display-mode) → integer
[setter] (set! (display-mode-refresh-rate display-mode) val)
[setter] (display-mode-refresh-rate-set! display-mode val)

Get or set the sdl2:display-mode's "refresh-rate" field, as an integer.

Event

Event Functions

[procedure] (event-state type) → boolean
[setter] (set! (event-state type) state)
[setter] (event-state-set! type state) → boolean

Get or set the state of the given event type. #t means the event type is enabled, so events of that type may appear on the event queue. #f means the event type is disabled, so events of that type will be automatically discarded. It is beneficial to your program's performance to disable event types that your program does not need. See SDL_EventState.

type must be an event type symbol or corresponding integer.

If you set an event type's state to #f, any events of that type already on the event queue will be immediately discarded. event-state-set! returns the previous state of the given event type.

[procedure] (flush-event! type)
[procedure] (flush-events! #!optional min-type max-type)

Remove all events on the event queue that match the given type or range of types. See SDL_FlushEvent and SDL_FlushEvents.

For flush-event!, type must be an event type symbol or corresponding integer.

For flush-events!, min-type and max-type specify the range of event types to remove. Events with a type outside of this range will not be removed. min-type and max-type must be event type symbols or corresponding integers. min-type defaults to 'first and max-type defaults to 'last, which means all event types match by default.

[procedure] (has-event? type) → boolean
[procedure] (has-events? #!optional min-type max-type) → boolean

Returns #t if the event queue currently has at least one event matching the given type or range of types. See SDL_HasEvent and SDL_HasEvents.

For has-event?, type must be an event type symbol or corresponding integer.

For has-events?, min-type and max-type specify the range of event types to consider. Events with a type outside of this range will not be considered. min-type and max-type must be event type symbols or corresponding integers. min-type defaults to 'first and max-type defaults to 'last, which means all event types match by default.

[procedure] (quit-requested?) → boolean

Returns #t if the event queue currently has at least one event of type 'quit. See SDL_QuitRequested.

[procedure] (get-events! num #!optional min-type max-type) → list of sdl2:events
[procedure] (peek-events num #!optional min-type max-type) → list of sdl2:events

Get multiple matching events from the front of the event queue. Returns a list of managed sdl2:events. See SDL_PeepEvents.

num specifies the maximum number of events to return. May return fewer events if there are not enough matching events on the event queue.

min-type and max-type specify the range of event types to return. Events with a type outside of this range will not be returned (they will remain on the queue). min-type and max-type must be event type symbols or corresponding integers. min-type defaults to 'first and max-type defaults to 'last, which means all event types match by default.

Both procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (poll-event! #!optional result-event) → sdl2:event

Get the next event from the event queue. The returned event is removed from the event queue. See SDL_PollEvent.

If result-event is omitted or #f, a new managed sdl2:event will be returned. If result-event is an sdl2:event, it will be modified and returned. This allows you to allocate a single event and reuse it many times in your event loop, so that your program does not create as much garbage for the garbage collector.

[procedure] (pump-events!)

See SDL_PumpEvents.

[procedure] (push-event! event) → boolean

See SDL_PushEvent.

Returns #t if the event was pushed onto the event queue, or #f if the event was discarded, e.g. because the event type is disabled (see event-state).

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (wait-event! #!optional result-event delay-fn) → sdl2:event
[procedure] (wait-event-timeout! timeout #!optional result-event delay-fn) → sdl2:event or #f

Wait for the next event to appear on the event queue, then return it. The returned event will be removed from the event queue. If there is already an event on the event queue, it will be returned immediately. Otherwise, these procedures will block the current thread until the next event appears (or the timeout expires).

If result-event is omitted or #f, a new managed sdl2:event will be returned. If result-event is an sdl2:event, it will be modified and returned. This allows you to allocate a single event and reuse it many times in your event loop, so that your program does not create as much garbage for the garbage collector.

delay-fn must be a procedure which accepts a number of milliseconds to sleep. By default it is the delay! procedure from this egg. If you are using SRFI-18 multithreading, you should provide a compatible delay procedure instead:

(import srfi-18)
(define (thread-delay! ms) (thread-sleep! (* ms 0.001)))
(sdl2:wait-event! (sdl2:make-event) thread-delay!)

These procedures are inspired by (but do not actually use) SDL_WaitEvent and SDL_WaitEventTimeout.

[procedure] (register-events! event-symbols) → list of pairs

Register zero or more symbols as new user event types. After registration, the given symbols may be used as event types, e.g. with event-type-set!. The symbols will be associated with the sdl2:user-event variant of sdl2:event.

event-symbols must be a list of symbols that are not already being used as event types. If any symbol is already being used, or if any member of the list is not a symbol, an error will be signalled and none of the new event types will be registered.

There are 32767 user event type numbers available to register. Each symbol in event-symbols will be assigned a sequential number. If there are not enough remaining numbers to register all the symbols in event-symbols, this procedure will signal an exception of kind (exn sdl2), and none of the new event types will be registered.

This procedure returns a list of pairs, with the car of each pair being a new event type symbol, and the cdr of each pair being that symbol's assigned number.

This procedure is based on SDL_RegisterEvents.

sdl2:event

sdl2:event is a record type that wraps a pointer to an SDL_Event. There are many specific event structs in SDL, and the sdl2:event type wraps them all. Each event struct has a corresponding variant of sdl2:event, described below. Each variant has one or more associated event type symbols.

Variant of sdl2:event Underlying struct Event type symbol(s)
sdl2:controller-axis-event SDL_ControllerAxisEvent 'controller-axis-motion
sdl2:controller-button-event SDL_ControllerButtonEvent 'controller-button-down
'controller-button-up
sdl2:controller-device-event SDL_ControllerDeviceEvent 'controller-device-added
'controller-device-removed
'controller-device-remapped
sdl2:display-event SDL_DisplayEvent 'display
sdl2:dollar-gesture-event SDL_DollarGestureEvent 'dollar-gesture
'dollar-record
sdl2:drop-event SDL_DropEvent 'drop-file
sdl2:joy-axis-event SDL_JoyAxisEvent 'joy-axis-motion
sdl2:joy-ball-event SDL_JoyBallEvent 'joy-ball-motion
sdl2:joy-button-event SDL_JoyButtonEvent 'joy-button-down
'joy-button-up
sdl2:joy-device-event SDL_JoyDeviceEvent 'joy-device-added
'joy-device-removed
sdl2:joy-hat-event SDL_JoyHatEvent 'joy-hat-motion
sdl2:keyboard-event SDL_KeyboardEvent 'key-down
'key-up
sdl2:mouse-button-event SDL_MouseButtonEvent 'mouse-button-down
'mouse-button-up
sdl2:mouse-motion-event SDL_MouseMotionEvent 'mouse-motion
sdl2:mouse-wheel-event SDL_MouseWheelEvent 'mouse-wheel
sdl2:multi-gesture-event SDL_MultiGestureEvent 'multi-gesture
sdl2:quit-event SDL_QuitEvent 'quit
sdl2:sys-wm-event SDL_SysWMEvent 'sys-wm
sdl2:text-editing-event SDL_TextEditingEvent 'text-editing
sdl2:text-input-event SDL_TextInputEvent 'text-input
sdl2:touch-finger-event SDL_TouchFingerEvent 'finger-down
'finger-up
'finger-motion
sdl2:user-event SDL_UserEvent (Call register-events! to register your own user event type symbols.)
sdl2:window-event SDL_WindowEvent 'window
[procedure] (event? obj) → boolean

Returns #t if obj is any variant of sdl2:event.

[procedure] (make-event #!optional type) → sdl2:event
[procedure] (make-event* #!optional type) → sdl2:event

Allocate and set the type of a new sdl2:event.

type defaults to 'first. It must be a event type symbol or equivalent integer.

[procedure] (free-event! event)

Free the memory of the sdl2:event's underlying struct. You can call this procedure with any variant of sdl2:event. event's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:events. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (event-type event) → symbol
[procedure] (event-type-raw event) → integer
[setter] (set! (event-type event) val)
[setter] (event-type-set! event val)

Get or set the sdl2:event's "type" field. You can use these procedures with any variant of sdl2:event. Setting this will change what variant of sdl2:event it is. E.g. if you set it to 'key-down, the event will become an sdl2:keyboard-event.

[procedure] (event-timestamp event) → integer
[setter] (set! (event-timestamp event) val)
[setter] (event-timestamp-set! event val)

Get or set the sdl2:event's "timestamp" field, as a nonnegative integer representing the time that the event occurred, in milliseconds since the SDL timer system was initialized. You can use these procedures with any variant of sdl2:event.

sdl2:controller-axis-event

sdl2:controller-axis-event is a variant of sdl2:event that wraps a pointer to an SDL_ControllerAxisEvent.

This event variant occurs when an axis on a controller moves. There may be more than one controller, and each controller may have more than one axis. You can distinguish them using the which and axis fields.

sdl2:controller-axis-event has the following event type symbols:

'controller-axis-motion
An axis on a controller moved.
[procedure] (controller-axis-event? obj) → boolean

Returns #t if obj is an sdl2:controller-axis-event.

[procedure] (controller-axis-event-which event) → integer
[setter] (set! (controller-axis-event-which event) val)
[setter] (controller-axis-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the controller (joystick) that the event is related to.

[procedure] (controller-axis-event-axis event) → symbol
[procedure] (controller-axis-event-axis-raw event) → integer
[setter] (set! (controller-axis-event-axis event) val)
[setter] (controller-axis-event-axis-set! event val)

Get or set the event's "axis" field, as a symbol indicating the axis that the event is related to.

Before sdl2 egg 0.4.0, controller-axis-event-axis returned an integer.

[procedure] (controller-axis-event-value event) → integer
[setter] (set! (controller-axis-event-value event) val)
[setter] (controller-axis-event-value-set! event val)

Get or set the event's "value" field, as an integer in the range -32768 to 32767 (inclusive), indicating the new value of the axis.

sdl2:controller-button-event

sdl2:controller-button-event is a variant of sdl2:event that wraps a pointer to an SDL_ControllerButtonEvent.

This event variant occurs when a button on a controller is pressed or released. There may be more than one controller, and each controller may have more than one button. You can distinguish them using the which and button fields.

sdl2:controller-button-event has the following event type symbols:

'controller-button-down
A button on a controller was pressed.
'controller-button-up
A button on a controller was released.
[procedure] (controller-button-event? obj) → boolean

Returns #t if obj is an sdl2:controller-button-event.

[procedure] (controller-button-event-which event) → integer
[setter] (set! (controller-button-event-which event) val)
[setter] (controller-button-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the controller (joystick) that the event is related to.

[procedure] (controller-button-event-button event) → symbol
[procedure] (controller-button-event-button-raw event) → integer
[setter] (set! (controller-button-event-button event) val)
[setter] (controller-button-event-button-set! event val)

Get or set the event's "button" field, as a symbol indicating the button that the event is related to.

Before sdl2 egg 0.4.0, controller-button-event-button returned an integer.

[procedure] (controller-button-event-state event) → boolean
[setter] (set! (controller-button-event-state event) val)
[setter] (controller-button-event-state-set! event val)

Get or set the event's "state" field, as a boolean indicating whether the button was pressed (#t) or released (#f). You can also find out by checking the event type: 'controller-button-down for pressed, or 'controller-button-up for released.

sdl2:controller-device-event

sdl2:controller-device-event is a variant of sdl2:event that wraps a pointer to an SDL_ControllerDeviceEvent.

This event variant occurs when a controller is added, removed, or remapped. There may be more than one controller. You can distinguish them using the which.

sdl2:controller-device-event has the following event type symbols:

'controller-device-added
A controller device was added.
'controller-device-removed
A controller device was removed.
'controller-device-remapped
A controller device was remapped.
[procedure] (controller-device-event? obj) → boolean

Returns #t if obj is an sdl2:controller-device-event.

[procedure] (controller-device-event-which event) → integer
[setter] (set! (controller-device-event-which event) val)
[setter] (controller-device-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the controller (joystick) that the event is related to.

sdl2:display-event

sdl2:display-event is a variant of sdl2:event that wraps a pointer to an SDL_DisplayEvent.

This event variant occurs when a display is connected, disconnected, or changes orientation.

sdl2:display-event has the following event type symbols:

'display
A display changed.
[procedure] (display-event? obj) → boolean

Returns #t if obj is an sdl2:display-event.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (display-event-display event) → integer
[setter] (set! (display-event-display event) display-index)
[setter] (display-event-display-set! event display-index)

Get or set the event's "display" field, as an integer indicating the index of the display that changed.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (display-event-event event) → symbol
[procedure] (display-event-event-raw event) → integer
[setter] (set! (display-event-event event) enum)
[setter] (display-event-event-set! event enum)

Get or set the event's "display" field, as an integer indicating the index of the display that changed.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (display-event-data1 event) → integer
[setter] (set! (display-event-data1 event) data)
[setter] (display-event-data1-set! event data)

Get or set the event's "data1" field, as an integer of event-dependent data.

If the event is a orientation kind of display-event, this field contains the new orientation as an integer enum. You can use display-event-orientation to access it as a symbol.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (display-event-orientation event) → symbol
[setter] (set! (display-event-orientation event) data)
[setter] (display-event-orientation-set! event orientation)

Wrapper for display-event-data1 which returns a symbol. Signals an error if the event is not a orientation kind of display-event.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

sdl2:dollar-gesture-event

sdl2:dollar-gesture-event is a variant of sdl2:event that wraps a pointer to an SDL_DollarGestureEvent.

This event variant occurs when a "$1 unistroke" gesture is performed or recorded.

sdl2:dollar-gesture-event has the following event type symbols:

'dollar-gesture
A dollar gesture was performed.
'dollar-record
A dollar gesture was recorded.
[procedure] (dollar-gesture-event? obj) → boolean

Returns #t if obj is an sdl2:dollar-gesture-event.

[procedure] (dollar-gesture-event-touch-id event) → integer
[setter] (set! (dollar-gesture-event-touch-id event) val)
[setter] (dollar-gesture-event-touch-id-set! event val)

Get or set the event's "touch-id" field, as an integer indicating the ID number of the touch device this event is related to.

[procedure] (dollar-gesture-event-gesture-id event) → integer
[setter] (set! (dollar-gesture-event-gesture-id event) val)
[setter] (dollar-gesture-event-gesture-id-set! event val)

Get or set the event's "gesture-id" field, as an integer indicating the ID number of the closest gesture to the performed stroke.

[procedure] (dollar-gesture-event-num-fingers event) → integer
[setter] (set! (dollar-gesture-event-num-fingers event) val)
[setter] (dollar-gesture-event-num-fingers-set! event val)

Get or set the event's "num-fingers" field, as an integer indicating the number of fingers used to draw the stroke.

[procedure] (dollar-gesture-event-error event) → float
[setter] (set! (dollar-gesture-event-error event) val)
[setter] (dollar-gesture-event-error-set! event val)

Get or set the event's "error" field, as a float indicating the difference between the gesture template and the actual performed gesture. Lower error is a better match.

[procedure] (dollar-gesture-event-x event) → float
[setter] (set! (dollar-gesture-event-x event) val)
[setter] (dollar-gesture-event-x-set! event val)

Get or set the event's "x" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized X coordinate of the center of the gesture.

[procedure] (dollar-gesture-event-y event) → float
[setter] (set! (dollar-gesture-event-y event) val)
[setter] (dollar-gesture-event-y-set! event val)

Get or set the event's "y" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized Y coordinate of the center of the gesture.

sdl2:drop-event

sdl2:drop-event is a variant of sdl2:event that wraps a pointer to an SDL_DropEvent.

This event variant occurs when the user requests that the program open a file, e.g. by dragging and dropping a file icon onto the program. With SDL 2.0.5 or higher, this event also occurs when the user drags and drops some text onto the program.

sdl2:drop-event has the following event type symbols:

'drop-file
The user dropped a file onto the program.
'drop-text
The user dropped some text onto the program. Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.
'drop-begin
Occurs at the start of dropping one or more files or lines of text onto the program at the same time. Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.
'drop-complete
Occurs at the completion of dropping one or more files or lines of text onto the program at the same time. Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.
[procedure] (drop-event? obj) → boolean

Returns #t if obj is an sdl2:drop-event.

[procedure] (drop-event-file event) → string or #f
[setter] (set! (drop-event-file event) val)
[setter] (drop-event-file-set! event val)

Get or set the event's "file" field, as a string whose meaning depends on the event type:

[procedure] (drop-event-window-id event) → integer
[setter] (set! (drop-event-window-id event) i)
[setter] (drop-event-window-id-set! event i)

Get or set the event's "windowID" field, as an integer indicating the ID of the window that the file(s) or text was dropped onto.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

sdl2:joy-axis-event

sdl2:joy-axis-event is a variant of sdl2:event that wraps a pointer to an SDL_JoyAxisEvent.

This event variant occurs when an axis on a joystick moves. There may be more than one joystick, and each joystick may have more than one axis. You can distinguish them using the which and axis fields.

sdl2:joy-axis-event has the following event type symbols:

'joy-axis-motion
An axis on a joystick moved.
[procedure] (joy-axis-event? obj) → boolean

Returns #t if obj is an sdl2:joy-axis-event.

[procedure] (joy-axis-event-which event) → integer
[setter] (set! (joy-axis-event-which event) val)
[setter] (joy-axis-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the joystick that the event is related to.

[procedure] (joy-axis-event-axis event) → integer
[setter] (set! (joy-axis-event-axis event) val)
[setter] (joy-axis-event-axis-set! event val)

Get or set the event's "axis" field, as an integer indicating the axis that the event is related to. E.g. 0 indicates the first axis on the joystick.

[procedure] (joy-axis-event-value event) → integer
[setter] (set! (joy-axis-event-value event) val)
[setter] (joy-axis-event-value-set! event val)

Get or set the event's "value" field, as an integer in the range -32768 to 32767 (inclusive), indicating the new value of the axis.

sdl2:joy-ball-event

sdl2:joy-ball-event is a variant of sdl2:event that wraps a pointer to an SDL_JoyBallEvent.

This event variant occurs when a trackball on a joystick moves. There may be more than one joystick, and each joystick may have more than one trackball. You can distinguish them using the which and ball fields.

sdl2:joy-ball-event has the following event type symbols:

'joy-ball-motion
A trackball on a joystick moved.
[procedure] (joy-ball-event? obj) → boolean

Returns #t if obj is an sdl2:joy-ball-event.

[procedure] (joy-ball-event-which event) → integer
[setter] (set! (joy-ball-event-which event) val)
[setter] (joy-ball-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the joystick that the event is related to.

[procedure] (joy-ball-event-ball event) → integer
[setter] (set! (joy-ball-event-ball event) val)
[setter] (joy-ball-event-ball-set! event val)

Get or set the event's "ball" field, as an integer indicating the trackball that the event is related to. E.g. 0 indicates the first trackball on the joystick.

[procedure] (joy-ball-event-xrel event) → integer
[setter] (set! (joy-ball-event-xrel event) val)
[setter] (joy-ball-event-xrel-set! event val)

Get or set the event's "xrel" field, as an integer (possibly negative) indicating how the trackball's X position changed relative to its previous position.

[procedure] (joy-ball-event-yrel event) → integer
[setter] (set! (joy-ball-event-yrel event) val)
[setter] (joy-ball-event-yrel-set! event val)

Get or set the event's "yrel" field, as an integer (possibly negative) indicating how the trackball's Y position changed relative to its previous position.

sdl2:joy-button-event

sdl2:joy-button-event is a variant of sdl2:event that wraps a pointer to an SDL_JoyButtonEvent.

This event variant occurs when a button on a joystick is pressed or released. There may be more than one joystick, and each joystick may have more than one button. You can distinguish them using the which and button fields.

sdl2:joy-button-event has the following event type symbols:

'joy-button-down
A button on a joystick was pressed.
'joy-button-up
A button on a joystick was released.
[procedure] (joy-button-event? obj) → boolean

Returns #t if obj is an sdl2:joy-button-event.

[procedure] (joy-button-event-which event) → integer
[setter] (set! (joy-button-event-which event) val)
[setter] (joy-button-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the joystick that the event is related to.

[procedure] (joy-button-event-button event) → integer
[setter] (set! (joy-button-event-button event) val)
[setter] (joy-button-event-button-set! event val)

Get or set the event's "button" field, as an integer indicating the button that the event is related to. E.g. 0 indicates the first button on the joystick.

[procedure] (joy-button-event-state event) → boolean
[setter] (set! (joy-button-event-state event) val)
[setter] (joy-button-event-state-set! event val)

Get or set the value of the event's "state" field, as a boolean indicating whether the button was pressed (#t) or released (#f). You can also find out by checking the event type: 'joy-button-down for pressed, or 'joy-button-up for released.

sdl2:joy-device-event

sdl2:joy-device-event is a variant of sdl2:event that wraps a pointer to an SDL_JoyDeviceEvent.

This event variant occurs when a joystick device is added or removed. There may be more than one joystick. You can distinguish them using the which field.

sdl2:joy-device-event has the following event type symbols:

'joy-device-added
A joystick device was added.
'joy-device-removed
A joystick device was removed.
[procedure] (joy-device-event? obj) → boolean

Returns #t if obj is an sdl2:joy-device-event.

[procedure] (joy-device-event-which event) → integer
[setter] (set! (joy-device-event-which event) val)
[setter] (joy-device-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the joystick that the event is related to.

sdl2:joy-hat-event

sdl2:joy-hat-event is a variant of sdl2:event that wraps a pointer to an SDL_JoyHatEvent.

This event variant occurs when an 8-directional hat switch on a joystick moves. There may be more than one joystick, and each joystick may have more than one hat switch. You can distinguish them using the which and hat fields.

sdl2:joy-hat-event has the following event type symbols:

'joy-hat-motion
A hat switch on a joystick moved.
[procedure] (joy-hat-event? obj) → boolean

Returns #t if obj is an sdl2:joy-hat-event.

[procedure] (joy-hat-event-which event) → integer
[setter] (set! (joy-hat-event-which event) val)
[setter] (joy-hat-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the device index of the joystick that the event is related to.

[procedure] (joy-hat-event-hat event) → integer
[setter] (set! (joy-hat-event-hat event) val)
[setter] (joy-hat-event-hat-set! event val)

Get or set the event's "hat" field, as an integer indicating the hat switch that the event is related to. E.g. 0 indicates the first hat switch on the joystick.

[procedure] (joy-hat-event-value event) → symbol
[procedure] (joy-hat-event-value-raw event) → integer
[setter] (set! (joy-hat-event-value event) val)
[setter] (joy-hat-event-value-set! event val)

Get or set the event's "value" field, indicating the new position of the hat switch.

sdl2:keyboard-event

sdl2:keyboard-event is a variant of sdl2:event that wraps a pointer to an SDL_KeyboardEvent.

This event variant occurs when a keyboard key is pressed or released.

sdl2:keyboard-event has the following event type symbols:

'key-down
A keyboard key was pressed.
'key-up
A keyboard key was released.
[procedure] (keyboard-event? obj) → boolean

Returns #t if obj is an sdl2:keyboard-event.

[procedure] (keyboard-event-window-id event) → integer
[setter] (set! (keyboard-event-window-id event) val)
[setter] (keyboard-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window that had keyboard focus at the time this event occurred, or 0 if no sdl2:window had keyboard focus.

[procedure] (keyboard-event-state event) → boolean
[setter] (set! (keyboard-event-state event) val)
[setter] (keyboard-event-state-set! event val)

Get or set the event's "state" field, as a boolean indicating whether the key was pressed (#t) or released (#f). You can also find out by checking the event type: 'key-down for pressed, or 'key-up for released.

[procedure] (keyboard-event-repeat event) → integer
[setter] (set! (keyboard-event-repeat event) val)
[setter] (keyboard-event-repeat-set! event val)

Get or set the event's "repeat" field, as a integer. Non-zero indicates that this is a key repeat, caused by the user pressing and holding the key for some time. Zero indicates this is not a key repeat.

[procedure] (keyboard-event-keysym event) → sdl2:keysym
[setter] (set! (keyboard-event-keysym event) val)
[setter] (keyboard-event-keysym-set! event val)

Get or set the event's "keysym" field, as an sdl2:keysym indicating the key that was pressed or released. The getter returns a copy of the sdl2:keysym stored in the event. Modifying the returned sdl2:keysym will not modify the event, but setting this field to a sdl2:keysym will modify the event.

Instead of using this procedure, it is more efficient and convenient to directly access the fields of the event's sdl2:keysym, using these procedures:

[procedure] (keyboard-event-scancode event) → symbol
[procedure] (keyboard-event-scancode-raw event) → integer
[setter] (set! (keyboard-event-scancode event) val)
[setter] (keyboard-event-scancode-set! event val)

Get or set the "scancode" field of the event's "keysym" field, indicating the physical key that was pressed or released. Setting this will modify the event.

[procedure] (keyboard-event-sym event) → symbol
[procedure] (keyboard-event-sym-raw event) → integer
[setter] (set! (keyboard-event-sym event) val)
[setter] (keyboard-event-sym-set! event val)

Get or set the "sym" field of the event's "keysym" field, indicating the logical key that was pressed or released. Setting this will modify the event.

[procedure] (keyboard-event-mod event) → list of symbols
[procedure] (keyboard-event-mod-raw event) → integer
[setter] (set! (keyboard-event-mod event) val)
[setter] (keyboard-event-mod-set! event val)

Get or set the "sym" field of the event's "keysym" field, indicating the modifier keys that were being pressed at the time the event occurred. Setting this will modify the event.

sdl2:mouse-button-event

sdl2:mouse-button-event is a variant of sdl2:event that wraps a pointer to an SDL_MouseButtonEvent.

This event variant occurs when a mouse button was pressed or released.

sdl2:mouse-button-event has the following event type symbols:

'mouse-button-down
A mouse button was pressed.
'mouse-button-up
A mouse button was released.
[procedure] (mouse-button-event? obj) → boolean

Returns #t if obj is an sdl2:mouse-button-event.

[procedure] (mouse-button-event-window-id event) → integer
[setter] (set! (mouse-button-event-window-id event) val)
[setter] (mouse-button-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window that had mouse focus at the time this event occurred, or 0 if no sdl2:window had mouse focus.

[procedure] (mouse-button-event-which event) → integer
[setter] (set! (mouse-button-event-which event) val)
[setter] (mouse-button-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the mouse instance ID.

[procedure] (mouse-button-event-button event) → symbol
[procedure] (mouse-button-event-button-raw event) → integer
[setter] (set! (mouse-button-event-button event) val)
[setter] (mouse-button-event-button-set! event val)

Get or set the event's "button" field, indicating the button that the event is related to.

[procedure] (mouse-button-event-state event) → boolean
[setter] (set! (mouse-button-event-state event) val)
[setter] (mouse-button-event-state-set! event val)

Get or set the event's "state" field, as a boolean indicating whether the button was pressed (#t) or released (#f). You can also find out by checking the event type: 'mouse-button-down for pressed, or 'mouse-button-up for released.

[procedure] (mouse-button-event-x event) → integer
[setter] (set! (mouse-button-event-x event) val)
[setter] (mouse-button-event-x-set! event val)

Get or set the event's "x" field, as an integer indicating the X position (in pixels) of the mouse at the time this event occurred.

[procedure] (mouse-button-event-y event) → integer
[setter] (set! (mouse-button-event-y event) val)
[setter] (mouse-button-event-y-set! event val)

Get or set the event's "y" field, as an integer indicating the Y position (in pixels) of the mouse at the time this event occurred.

sdl2:mouse-motion-event

sdl2:mouse-motion-event is a variant of sdl2:event that wraps a pointer to an SDL_MouseMotionEvent.

This event variant occurs when the mouse cursor moves.

sdl2:mouse-motion-event has the following event type symbols:

'mouse-motion
The mouse cursor moved.
[procedure] (mouse-motion-event? obj) → boolean

Returns #t if obj is an sdl2:mouse-motion-event.

[procedure] (mouse-motion-event-window-id event) → integer
[setter] (set! (mouse-motion-event-window-id event) val)
[setter] (mouse-motion-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window that had mouse focus at the time this event occurred, or 0 if no sdl2:window had mouse focus.

[procedure] (mouse-motion-event-which event) → integer
[setter] (set! (mouse-motion-event-which event) val)
[setter] (mouse-motion-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the mouse instance ID.

[procedure] (mouse-motion-event-state event) → list of symbols
[procedure] (mouse-motion-event-state-raw event) → integer
[setter] (set! (mouse-motion-event-state event) val)
[setter] (mouse-motion-event-state-set! event val)

Get or set the event's "state" field, indicating the mouse buttons that were being pressed at the time this event occurred.

[procedure] (mouse-motion-event-x event) → integer
[setter] (set! (mouse-motion-event-x event) val)
[setter] (mouse-motion-event-x-set! event val)

Get or set the event's "x" field, as an integer indicating the X position (in pixels) of the mouse at the time this event occurred.

[procedure] (mouse-motion-event-y event) → integer
[setter] (set! (mouse-motion-event-y event) val)
[setter] (mouse-motion-event-y-set! event val)

Get or set the event's "y" field, as an integer indicating the Y position (in pixels) of the mouse at the time this event occurred.

[procedure] (mouse-motion-event-xrel event) → integer
[setter] (set! (mouse-motion-event-xrel event) val)
[setter] (mouse-motion-event-xrel-set! event val)

Get or set the event's "xrel" field, as an integer (possibly negative) indicating the amount the mouse's X position changed since its previous position.

[procedure] (mouse-motion-event-yrel event) → integer
[setter] (set! (mouse-motion-event-yrel event) val)
[setter] (mouse-motion-event-yrel-set! event val)

Get or set the event's "yrel" field, as an integer (possibly negative) indicating the amount the mouse's Y position changed since its previous position.

sdl2:mouse-wheel-event

sdl2:mouse-wheel-event is a variant of sdl2:event that wraps a pointer to an SDL_MouseWheelEvent.

This event variant occurs when a mouse wheel moves.

sdl2:mouse-wheel-event has the following event type symbols:

'mouse-wheel
A mouse wheel moved.
[procedure] (mouse-wheel-event? obj) → boolean

Returns #t if obj is an sdl2:mouse-wheel-event.

[procedure] (mouse-wheel-event-window-id event) → integer
[setter] (set! (mouse-wheel-event-window-id event) val)
[setter] (mouse-wheel-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window that had mouse focus at the time this event occurred, or 0 if no sdl2:window had mouse focus.

[procedure] (mouse-wheel-event-which event) → integer
[setter] (set! (mouse-wheel-event-which event) val)
[setter] (mouse-wheel-event-which-set! event val)

Get or set the event's "which" field, as an integer indicating the mouse instance ID.

[procedure] (mouse-wheel-event-x event) → integer
[setter] (set! (mouse-wheel-event-x event) val)
[setter] (mouse-wheel-event-x-set! event val)

Get or set the event's "x" field, as an integer (possibly negative) indicating the amount the wheel scrolled horizontally. Positive numbers normally indicate scrolling to the right, negative numbers indicate scrolling to the left. But if the "direction" field is set to 'flipped in SDL 2.0.4 or higher, the meaning of this field is reversed.

[procedure] (mouse-wheel-event-y event) → integer
[setter] (set! (mouse-wheel-event-y event) val)
[setter] (mouse-wheel-event-y-set! event val)

Get or set the event's "y" field, as an integer (possibly negative) indicating the amount the wheel scrolled vertically. Positive numbers normally indicate scrolling away from the user, negative numbers indicate scrolling toward the user. But if the "direction" field is set to 'flipped in SDL 2.0.4 or higher, the meaning of this field is reversed.

[procedure] (mouse-wheel-event-direction event) → symbol
[setter] (set! (mouse-wheel-event-direction event) val)
[setter] (mouse-wheel-event-direction-set! event val)

Get or set the event's "direction" field, as one of the following symbols:

'normal
"Normal" scrolling mode.
'flipped
"Flipped" or "natural" scrolling mode. You can multiple the "x" and "y" field values by -1 to get the "normal" values.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.2.0 or higher.

sdl2:multi-gesture-event

sdl2:multi-gesture-event is a variant of sdl2:event that wraps a pointer to an SDL_MultiGestureEvent.

This event variant occurs when a multi-finger gesture is performed on a touch device. This is useful for recognizing common gestures that involve multiple fingers, e.g. pinching or rotating.

sdl2:multi-gesture-event has the following event type symbols:

'multi-gesture
A multi-finger gesture was performed.
[procedure] (multi-gesture-event? obj) → boolean

Returns #t if obj is an sdl2:multi-gesture-event.

[procedure] (multi-gesture-event-touch-id event) → integer
[setter] (set! (multi-gesture-event-touch-id event) val)
[setter] (multi-gesture-event-touch-id-set! event val)

Get or set the event's "touch-id" field, as an integer indicating the ID number of the touch device this event is related to.

[procedure] (multi-gesture-event-dtheta event) → float
[setter] (set! (multi-gesture-event-dtheta event) val)
[setter] (multi-gesture-event-dtheta-set! event val)

Get or set the event's "dtheta" field, as a float indicating the amount that the fingers rotated during this motion.

[procedure] (multi-gesture-event-ddist event) → float
[setter] (set! (multi-gesture-event-ddist event) val)
[setter] (multi-gesture-event-ddist-set! event val)

Get or set the event's "ddist" field, as a float indicating the amount that the fingers pinched during this motion.

[procedure] (multi-gesture-event-x event) → float
[setter] (set! (multi-gesture-event-x event) val)
[setter] (multi-gesture-event-x-set! event val)

Get or set the event's "x" field, as a float indicating the normalized X coordinate of the center of the gesture.

[procedure] (multi-gesture-event-y event) → float
[setter] (set! (multi-gesture-event-y event) val)
[setter] (multi-gesture-event-y-set! event val)

Get or set the event's "y" field, as a float indicating the normalized Y coordinate of the center of the gesture.

[procedure] (multi-gesture-event-num-fingers event) → integer
[setter] (set! (multi-gesture-event-num-fingers event) val)
[setter] (multi-gesture-event-num-fingers-set! event val)

Get or set the event's "num-fingers" field, as an integer indicating the number of fingers used in the gesture.

sdl2:quit-event

sdl2:quit-event is a variant of sdl2:event that wraps a pointer to an SDL_QuitEvent.

This event variant occurs when the user requests to quit the program. There are various ways this might happen, depending on the platform.

sdl2:quit-event has the following event type symbols:

'quit
The user requested to quit the program.
[procedure] (quit-event? obj) → boolean

Returns #t if obj is an sdl2:quit-event.

sdl2:sys-wm-event

sdl2:sys-wm-event is a variant of sdl2:event that wraps a pointer to an SDL_SysWMEvent.

This event variant is for very advanced use cases. Most people can ignore it.

sdl2:sys-wm-event has the following event type symbols:

'sys-wm
A platform-specific event occurred.
[procedure] (sys-wm-event? obj) → boolean

Returns #t if obj is an sdl2:sys-wm-event.

[procedure] (sys-wm-event-msg-raw event) → pointer
[setter] (set! (sys-wm-event-msg-raw event) val)
[setter] (sys-wm-event-msg-raw-set! event val)

Get or set the event's "msg" field, as a raw pointer to a SDL_SysWMmsg struct describing the platform-specific event that occurred. This is for very advanced use cases. Most people can ignore it.

sdl2:text-editing-event

sdl2:text-editing-event is a variant of sdl2:event that wraps a pointer to an SDL_TextEditingEvent.

This event occurs when a user is editing (composing) text, e.g. using an Input Method Editor (IME). See the Text Input tutorial for SDL.

sdl2:text-editing-event has the following event type symbols:

'text-editing
The user editted some text being composed.
[procedure] (text-editing-event? obj) → boolean

Returns #t if obj is an sdl2:text-editing-event.

[procedure] (text-editing-event-window-id event) → integer
[setter] (set! (text-editing-event-window-id event) val)
[setter] (text-editing-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window that had keyboard focus at the time this event occurred, or 0 if no sdl2:window had keyboard focus.

[procedure] (text-editing-event-text event) → string
[setter] (set! (text-editing-event-text event) val)
[setter] (text-editing-event-text-set! event val)

Get or set the event's text event, as a UTF8 string up to 32 bytes long (including the null byte), holding the text being edited.

[procedure] (text-editing-event-start event) → integer
[setter] (set! (text-editing-event-start event) val)
[setter] (text-editing-event-start-set! event val)

Get or set the event's "start" field, as an integer indicating the location to begin editing from.

[procedure] (text-editing-event-length event) → integer
[setter] (set! (text-editing-event-length event) val)
[setter] (text-editing-event-length-set! event val)

Get or set the event's "length" field, as an integer indicating the number of characters to edit from the start point.

sdl2:text-input-event

sdl2:text-input-event is a variant of sdl2:event that wraps a pointer to an SDL_TextInputEvent.

This event occurs when the users enters some text, possibly using an Input Metod Editor (IME). See the Text Input tutorial for SDL.

sdl2:text-input-event has the following event type symbols:

'text-input
The use inputted some text.
[procedure] (text-input-event? obj) → boolean

Returns #t if obj is an sdl2:text-input-event.

[procedure] (text-input-event-window-id event) → integer
[setter] (set! (text-input-event-window-id event) val)
[setter] (text-input-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window that had keyboard focus at the time this event occurred, or 0 if no sdl2:window had keyboard focus.

[procedure] (text-input-event-text event) → string
[setter] (set! (text-input-event-text event) val)
[setter] (text-input-event-text-set! event val)

Get or set the event's text event, as a UTF8 string up to 32 bytes long (including the ending null byte), holding the text that was inputted.

sdl2:touch-finger-event

sdl2:touch-finger-event is a variant of sdl2:event that wraps a pointer to an SDL_TouchFingerEvent.

This event variant occurs when the user presses, lifts, or moves a finger (or stylus, etc.) on a supported touch device, e.g. the touch screen of a mobile phone or tablet device, or certain laptop trackpads. There may be more than one finger touching at the same time; you can distinguish the fingers by the finger-id number.

sdl2:touch-finger-event has the following event type symbols:

'finger-down
A finger started touching a touch device (i.e. was pressed down).
'finger-up
A finger stopped touching a touch device (i.e. was lifted up).
'finger-motion
A finger moved while touching a touch device.
[procedure] (touch-finger-event? obj) → boolean

Returns #t if obj is an sdl2:touch-finger-event.

[procedure] (touch-finger-event-touch-id event) → integer
[setter] (set! (touch-finger-event-touch-id event) val)
[setter] (touch-finger-event-touch-id-set! event val)

Get or set the event's "touch-id" field, as an integer indicating the ID number of the touch device this event is related to.

[procedure] (touch-finger-event-finger-id event) → integer
[setter] (set! (touch-finger-event-finger-id event) val)
[setter] (touch-finger-event-finger-id-set! event val)

Get or set the event's "finger-id" field, as an integer indicating the ID number of the finger this event is related to.

[procedure] (touch-finger-event-x event) → float
[setter] (set! (touch-finger-event-x event) val)
[setter] (touch-finger-event-x-set! event val)

Get or set the event's "x" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized X coordinate of the touch event.

[procedure] (touch-finger-event-y event) → float
[setter] (set! (touch-finger-event-y event) val)
[setter] (touch-finger-event-y-set! event val)

Get or set the event's "y" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized Y coordinate of the touch event.

[procedure] (touch-finger-event-dx event) → float
[setter] (set! (touch-finger-event-dx event) val)
[setter] (touch-finger-event-dx-set! event val)

Get or set the event's "dx" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized distance moved on the X axis.

[procedure] (touch-finger-event-dy event) → float
[setter] (set! (touch-finger-event-dy event) val)
[setter] (touch-finger-event-dy-set! event val)

Get or set the event's "dy" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized distance moved on the Y axis.

[procedure] (touch-finger-event-pressure event) → float
[setter] (set! (touch-finger-event-pressure event) val)
[setter] (touch-finger-event-pressure-set! event val)

Get or set the event's "pressure" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the pressure being applied.

sdl2:user-event

sdl2:user-event is a variant of sdl2:event that wraps a pointer to an SDL_UserEvent.

This event variant does not occur normally. Instead, you can make instances of this event variant and push them to the event queue using push-event!. The meaning of this event variant is entirely up for you to decide. For example, you can use it to create custom event types related to your gameplay.

sdl2:user-event does not have any event type symbols by default. Call register-events! to register your own custom event type symbols for sdl2:user-event.

[procedure] (user-event? obj) → boolean

Returns #t if obj is an sdl2:user-event.

[procedure] (user-event-window-id event) → integer
[setter] (set! (user-event-window-id event) val)
[setter] (user-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID number of the sdl2:window associated with this event.

[procedure] (user-event-code event) → integer
[setter] (set! (user-event-code event) val)
[setter] (user-event-code-set! event val)

Get or set the event's "code" field, as an integer in the range -32768 to 32767 (inclusive). The meaning of this field is for you to decide.

[procedure] (user-event-data1-raw event) → pointer or #f
[setter] (set! (user-event-data1-raw event) val)
[setter] (user-event-data1-raw-set! event val)

Get or set the event's "data1" field, as a raw pointer or #f. The meaning of this field is for you to decide.

If you want to store a pointer to a Scheme object here, be sure to evict the object first. Otherwise the object's location in memory might change, rendering the pointer invalid.

[procedure] (user-event-data2-raw event) → pointer or #f
[setter] (set! (user-event-data2-raw event) val)
[setter] (user-event-data2-raw-set! event val)

Get or set the event's "data2" field, as a raw pointer or #f. The meaning of this field is for you to decide.

If you want to store a pointer to a Scheme object here, be sure to evict the object first. Otherwise the object's location in memory might change, rendering the pointer invalid.

sdl2:window-event

sdl2:window-event is a variant of sdl2:event that wraps a pointer to an SDL_WindowEvent.

This event variant occurs when various changes occur to a window, e.g. when a window is moved, resized, minimized, closed, etc.

sdl2:window-event has the following event type symbols:

'window
A window-related event occurred.
[procedure] (window-event? obj) → boolean

Returns #t if obj is an sdl2:window-event.

[procedure] (window-event-window-id event) → integer
[setter] (set! (window-event-window-id event) val)
[setter] (window-event-window-id-set! event val)

Get or set the event's "window-id" field, as an integer indicating the ID of the sdl2:window that the event is related to.

[procedure] (window-event-event event) → symbol
[procedure] (window-event-event-raw event) → integer
[setter] (set! (window-event-event event) val)
[setter] (window-event-event-set! event val)

Get or set the event's "event" field, indicating what happened to the window.

[procedure] (window-event-data1 event) → integer
[setter] (set! (window-event-data1 event) val)
[setter] (window-event-data1-set! event val)

Get or set the sdl2:window-event's "data1" field, as an integer. The meaning of this value depends on what kind of window event it was (see window-event-event). E.g. if the window was resized, this will hold the new window width; if the window was moved, this will hold the new x position.

[procedure] (window-event-data2 event) → integer
[setter] (set! (window-event-data2 event) val)
[setter] (window-event-data2-set! event val)

Get or set the sdl2:window-event's "data2" field, as an integer. The meaning of this value depends on what kind of window event it was (see window-event-event). E.g. if the window was resized, this will hold the new window height; if the window was moved, this will hold the new y position.

Game Controller

[procedure] (is-game-controller? joy-index) → boolean

Returns #t if the joystick at the given index is a controller. See SDL_IsGameController.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-open! joy-index) → sdl2:game-controller

Open the game controller wrapping the joystick at the given index. Not all joysticks are controllers; use is-game-controller? to check before calling this. See SDL_GameControllerOpen.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-close! controller)

See SDL_GameControllerClose.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-from-instance-id instance-id) → sdl2:game-controller

See SDL_GameControllerFromInstanceID.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-update!)

See SDL_GameControllerUpdate.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-event-state?) → boolean
[setter] (set! (game-controller-event-state?) state)
[setter] (game-controller-event-state-set! state)

See SDL_GameControllerEventState.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-attached? controller) → boolean

See SDL_GameControllerGetAttached.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-joystick controller) → sdl2:joystick

See SDL_GameControllerGetJoystick.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-mapping controller) → string or #f

See SDL_GameControllerMapping.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-mapping-for-guid) → string or #f

See SDL_GameControllerMappingForGUID.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-add-mapping! str) → integer

Returns 1 if a new mapping was added, 0 if an existing mapping was updated. See SDL_GameControllerAddMapping.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-add-mappings-from-file! path) → integer

See SDL_GameControllerAddMappingsFromFile.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.2 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-add-mappings-from-rw! rwops close?) → integer

See SDL_GameControllerAddMappingsFromRW.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.2 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-num-mappings) → integer

See SDL_GameControllerNumMappings.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-mapping-for-index index) → string or #f

See SDL_GameControllerMappingForIndex.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-mapping-for-device-index device-index) → string or #f

See SDL_GameControllerMappingForDeviceIndex.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-name controller) → string

See SDL_GameControllerName.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-name-for-index) →

See SDL_GameControllerNameForIndex.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-axis axis) → integer

See SDL_GameControllerGetAxis.

axis must be a game controller axis symbol or equivalent integer.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-axis-from-string str) → symbol
[procedure] (game-controller-get-axis-from-string-raw str) → integer

See SDL_GameControllerGetAxisFromString.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-string-for-axis axis) →

See SDL_GameControllerGetStringForAxis.

axis must be a game controller axis symbol or equivalent integer.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-button button) → boolean

See SDL_GameControllerGetButton.

button must be a game controller button symbol or equivalent integer.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-button-from-string) →
[procedure] (game-controller-get-button-from-string-raw) →

See SDL_GameControllerGetButtonFromString.

[procedure] (game-controller-get-string-for-button button) → string

See SDL_GameControllerGetStringForButton.

button must be a game controller button symbol or equivalent integer.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-bind-for-axis axis) → sdl2:game-controller-button-bind

See SDL_GameControllerGetBindForAxis.

axis must be a game controller axis symbol or equivalent integer.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-bind-for-button button) → sdl2:game-controller-button-bind

See SDL_GameControllerGetBindForButton.

button must be a game controller button symbol or equivalent integer.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-player-index controller) → integer

See SDL_GameControllerGetPlayerIndex.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-product controller) → integer

See SDL_GameControllerGetProduct.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-product-version controller) → integer

See SDL_GameControllerGetProductVersion.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-get-vendor controller) → integer

See SDL_GameControllerGetVendor.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-rumble! controller low-freq hi-freq duration-ms) → boolean

See SDL_GameControllerRumble.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

sdl2:game-controller

sdl2:game-controller is a record type that wraps a pointer to an SDL_GameController struct.

[procedure] (game-controller? obj) → boolean

Returns #t if obj is an sdl2:game-controller.

Requires sdl2 egg 0.4.0 or higher.

sdl2:game-controller-button-bind

sdl2:game-controller-button-bind is a record type that wraps a pointer to an SDL_GameControllerButtonBind struct.

Despite the name, this struct is also used for game controller axis bindings. The game controller buttons and axes might be bound to joystick axes, buttons, or hats.

[procedure] (game-controller-button-bind? obj) → boolean

Returns #t if obj is an sdl2:game-controller-button-bind.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-button-bind-type bind) → symbol
[procedure] (game-controller-button-bind-type-raw bind) → integer

Get the sdl2:game-controller-button-bind's "type" field.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-button-bind-axis bind) → integer

Get the sdl2:game-controller-button-bind's "axis" field, the index of the joystick axis that is bound.

This procedure signals an exception if the bind type is not axis. Check with game-controller-button-bind-type before calling this.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-button-bind-button bind) → integer

Get the sdl2:game-controller-button-bind's "button" field, the index of the joystick button that is bound.

This procedure signals an exception if the bind type is not button. Check with game-controller-button-bind-type before calling this.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-button-bind-hat bind) → integer

Get the sdl2:game-controller-button-bind's "hat" field, the index of the joystick hat that is bound.

This procedure signals an exception if the bind type is not hat. Check with game-controller-button-bind-type before calling this.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (game-controller-button-bind-hat-mask-raw bind) → integer

Get the sdl2:game-controller-button-bind's "hat" field, the integer bitmask of the joystick hat direction that is bound.

This procedure signals an exception if the bind type is not hat. Check with game-controller-button-bind-type before calling this.

Requires sdl2 egg 0.4.0 or higher.

Hints

Hints (aka Configuration Variables) are a way for you to give hints to the SDL library about how you would like it to behave. Most hints affect platform-specific behavior. Hints are merely suggestions, and SDL may or may not obey them.

Hints can also be specified or overriden by environment variables. This allows the user to configure SDL to work best on their system. Usually the environment variable is similar to the SDL constant name, but prefixed with "SDL_" instead of "SDL_HINT_". For more information see SDL_hints.h.

Procedures for getting and setting hints are available in sdl2 egg 0.2.0 and higher. But, SDL will notice environment variables even if you are using an earlier version of the sdl2 egg.

Some hints are only effective after a certain version of SDL. You may safely set the hint with any version of SDL, but it will have no effect on older versions of SDL.

Hint Functions

[procedure] (get-hint name) → string or #f

Returns the current value of the hint as a string, or #f if the hint has no value. See SDL_GetHint and SDL_hints.h

name must be a hint symbol or string (same as the environment variable name).

Requires sdl2 egg 0.2.0 or higher.

[procedure] (get-hint-boolean name) → boolean

Returns the current value of the hint as a boolean. See SDL_GetHintBoolean and SDL_hints.h

name must be a hint symbol or string (same as the environment variable name).

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (set-hint! name value #!optional priority) → boolean

Sets the value of the hint. See SDL_SetHintWithPriority and SDL_hints.h

name must be a hint symbol or string (same as the environment variable name). This procedure signals an exception if name is an unrecognized symbol, but accepts any string, even if it is not recognized.

value specifies the new value of the hint. It must be a string.

priority specifies the priorily level for setting the hint. If it is omitted, the priority will be 'normal. It must be one of these symbols:

Returns #t if the hint's value was set, or #f if it was not set (e.g. because the hint was already set with a higher priority).

Requires sdl2 egg 0.2.0 or higher.

[procedure] (clear-hints!)

Removes the values and priorities of all hints. See SDL_ClearHints.

Requires sdl2 egg 0.2.0 or higher.

Joystick

Joystick Functions

[procedure] (num-joysticks) → integer

See SDL_NumJoysticks.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-open! index) → sdl2:joystick

See SDL_JoystickOpen.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-close! joystick)

See SDL_JoystickClose.

[procedure] (joystick-from-instance-id id) → sdl2:joystick

See SDL_JoystickFromInstanceID.

Note: The returned joystick will be a new sdl2:joystick record pointing to the address of the existing joystick. It will be struct-eq? to other sdl2:joystick records for the same joystick, but not eq?.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.2.0 or higher.

[procedure] (joystick-update!)

See SDL_JoystickUpdate.

[procedure] (joystick-event-state) → boolean
[setter] (set! (joystick-event-state) state) → boolean
[setter] (joystick-event-state-set! state) → boolean

joystick-event-state returns #t if joystick events are currently enabled, or #f if they are disabled (i.e. all future joystick-related events will be ignored). See SDL_JoystickEventState.

The setters enable (if state is #t) or disable (if state is #f) joytsick events. Warning: Calling the setters may delete all events currently in the event queue.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-name-for-index device-index) → string or #f

See SDL_JoystickNameForIndex.

Returns #f if no name can be found.

[procedure] (joystick-get-device-guid device-index) → sdl2:joystick-guid

See SDL_JoystickGetDeviceGUID.

Returns a new managed sdl2:joystick-guid.

[procedure] (joystick-get-axis-initial-state joy axis) → [state has-initial]

See SDL_JoystickGetAxisInitialState.

This procedure returns multiple values:

state
Integer value of the initial state.
has-initial
Boolean indicating whether the joystick axis has an initial state.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-device-instance-id device-index) → integer

See SDL_JoystickGetDeviceInstanceID.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-device-player-index device-index) → integer

See SDL_JoystickGetDevicePlayerIndex.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-device-product device-index) → integer

See SDL_JoystickGetDeviceProduct.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-device-product-version device-index) → integer

See SDL_JoystickGetDeviceProductVersion.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-device-type device-index) → symbol
[procedure] (joystick-get-device-type-raw device-index) → integer

See SDL_JoystickGetDeviceType.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-device-vendor device-index) →

See SDL_JoystickGetDeviceVendor.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-player-index joystick) → integer

See SDL_JoystickGetPlayerIndex.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-product joystick) → integer

See SDL_JoystickGetProduct.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-product-version joystick) → integer

See SDL_JoystickGetProductVersion.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-type joystick) → symbol
[procedure] (joystick-get-type-raw joystick) → integer

See SDL_JoystickGetType.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-get-vendor joystick) → integer

See SDL_JoystickGetVendor.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (joystick-rumble! low-freq hi-freq duration-ms) → boolean

See SDL_JoystickRumble.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (lock-joysticks!)

See SDL_LockJoysticks.

Requires SDL 2.0.7 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (unlock-joysticks!)

See SDL_UnlockJoysticks.

Requires SDL 2.0.7 or higher, and sdl2 egg 0.4.0 or higher.

sdl2:joystick

sdl2:joystick is a record type that wraps a pointer to an SDL_Joystick struct.

[procedure] (joystick? obj) → boolean

Returns #t if obj is an sdl2:joystick.

[procedure] (joystick-instance-id joystick) → integer

See SDL_JoystickInstanceID.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-name joystick) → string or #f

See SDL_JoystickName.

Returns #f if no name can be found.

[procedure] (joystick-get-guid joystick) → sdl2:joystick-guid

See SDL_JoystickGetGUID.

Returns a new managed sdl2:joystick-guid.

[procedure] (joystick-attached? joystick) → boolean

See SDL_JoystickGetAttached.

[procedure] (joystick-current-power-level joystick) → symbol

See SDL_JoystickCurrentPowerLevel.

Returns a joystick power level symbol.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.2.0 or higher.

[procedure] (joystick-num-axes joystick) → integer

See SDL_JoystickNumAxes.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-num-balls joystick) → integer

See SDL_JoystickNumBalls.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-num-buttons joystick) → integer

See SDL_JoystickNumButtons.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-num-hats joystick) → integer

See SDL_JoystickNumHats.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (joystick-get-axis joystick axis-num) → integer

See SDL_JoystickGetAxis.

Signals an exception of kind (exn bounds) if axis-num is less than 0 or greater than the last axis on the joystick (see joystick-num-axiss).

[procedure] (joystick-get-ball joystick ball-num) → [dx dy]

See SDL_JoystickGetBall.

This procedure returns multiple values.

Signals an exception of kind (exn bounds) if ball-num is less than 0 or greater than the last trackball on the joystick (see joystick-num-balls). Signals an exception of kind (exn sdl2) if some other error occurs.

[procedure] (joystick-get-button joystick button-num) → boolean

See SDL_JoystickGetButton.

Signals an exception of kind (exn bounds) if button-num is less than 0 or greater than the last button on the joystick (see joystick-num-buttons).

[procedure] (joystick-get-hat joystick hat-num) → symbol
[procedure] (joystick-get-hat-raw joystick hat-num) → integer

See SDL_JoystickGetHat.

Both procedures signal an exception of kind (exn bounds) if hat-num is less than 0 or greater than the last hat switch on the joystick (see joystick-num-hats).

sdl2:joystick-guid

sdl2:joystick-guid is a record type that wraps a pointer to an SDL_JoystickGUID struct.

[procedure] (joystick-guid? obj) → boolean

Returns #t if obj is an sdl2:joystick-guid.

[procedure] (free-joystick-guid! guid)

Free the memory of the sdl2:joystick-guid's underlying struct. guid's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:joystick-guids. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (joystick-get-guid-from-string str) → sdl2:joystick-guid

See SDL_JoystickGetGUIDFromString.

Returns a new managed sdl2:joystick-guid.

[procedure] (joystick-get-guid-string guid) → string

See SDL_JoystickGetGUIDString.

Keyboard

Keyboard Functions

[procedure] (get-key-from-name name-str) → symbol
[procedure] (get-key-from-name-raw name-str) → integer

See SDL_GetKeyFromName.

[procedure] (get-key-from-scancode scancode) → symbol
[procedure] (get-key-from-scancode-raw scancode) → integer

See SDL_GetKeyFromScancode.

scancode must be a keyboard scancode symbol or an integer representing a keyboard scancode.

[procedure] (get-key-name key) → string

See SDL_GetKeyName.

key must be a keyboard keycode symbol or an integer representing a keyboard keycode.

[procedure] (get-scancode-from-name name-str) → symbol
[procedure] (get-scancode-from-name-raw name-str) → integer

See SDL_GetScancodeFromName.

[procedure] (get-scancode-from-key key) → symbol
[procedure] (get-scancode-from-key-raw key) → integer

See SDL_GetScancodeFromKey.

key must be a keyboard keycode symbol or an integer representing a keyboard keycode.

[procedure] (get-scancode-name scancode) → string

See SDL_GetScancodeName.

scancode must be a keyboard scancode symbol or an integer representing a keyboard scancode.

[procedure] (get-keyboard-focus) → sdl2:window

See SDL_GetKeyboardFocus.

[procedure] (scancode-pressed? scancode) → boolean

Returns #t if the keyboard key with the given scancode is currently being pressed.

scancode must be either a keyboard scancode symbol or an integer representing a scancode.

This procedure queries SDL's internal keyboard state, which is tied to the event system. Call pump-events! to update the keyboard state.

This procedure is based on SDL_GetKeyboardState.

[procedure] (mod-state) → list of symbols
[procedure] (mod-state-raw) → integer
[setter] (set! (mod-state) state)
[setter] (mod-state-set! state)

See SDL_GetModState.

[setter] (text-input-rect-set! rect)

rect can be an sdl2:rect or #f.

See SDL_SetTextInputRect.

[procedure] (start-text-input!)

See SDL_StartTextInput.

[procedure] (stop-text-input!)

See SDL_StopTextInput.

[procedure] (text-input-active?) → boolean

See SDL_IsTextInputActive.

[procedure] (screen-keyboard-support?) → boolean

See SDL_HasScreenKeyboardSupport.

[procedure] (screen-keyboard-shown? window) → boolean

See SDL_IsScreenKeyboardShown.

sdl2:keysym

sdl2:keysym is a record type that wraps a pointer to an SDL_Keysym struct.

[procedure] (keysym? obj) → boolean

Returns #t if obj is an sdl2:keysym.

[procedure] (make-keysym #!optional scancode sym mod) → sdl2:keysym
[procedure] (make-keysym* #!optional scancode sym mod) → sdl2:keysym

Allocate and initialize a new sdl2:keysym.

scancode defaults to 'unknown. It must be a keyboard scancode symbol or equivalent integer.

sym defaults to 'unknown. It must be a keyboard keycode symbol or equivalent integer.

mod defaults to '(). It must be a list of zero or more keyboard modifier symbols or an equivalent integer bitfield.

[procedure] (free-keysym! keysym)

Free the memory of the sdl2:keysym's underlying struct. keysym's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:keysyms. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (keysym-scancode keysym) → symbol
[procedure] (keysym-scancode-raw keysym) → integer
[setter] (set! (keysym-scancode keysym) val)
[setter] (keysym-scancode-set! keysym val)

Get or set the sdl2:keysym's "scancode" field, indicating the physical key that this keysym describes.

[procedure] (keysym-sym keysym) → symbol
[procedure] (keysym-sym-raw keysym) → integer
[setter] (set! (keysym-sym keysym) val)
[setter] (keysym-sym-set! keysym val)

Get or set the sdl2:keysym's "sym" field, indicating the logical key that this keysym describes.

[procedure] (keysym-mod keysym) → list of symbols
[procedure] (keysym-mod-raw keysym) → integer
[setter] (set! (keysym-mod keysym) val)
[setter] (keysym-mod-set! keysym val)

Get or set the sdl2:keysym's "mod" field, indicating the modifier keys that this keysym describes.

Mouse

[procedure] (capture-mouse! enabled)

See SDL_CaptureMouse.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-global-mouse-state) → [list x y]
[procedure] (get-global-mouse-state-raw) → [bitmask x y]

See SDL_GetGlobalMouseState. These procedures return multiple values:

Requires SDL 2.0.4 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-mouse-focus) → sdl2:window or #f

See SDL_GetMouseFocus.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-mouse-state) → [list x y]
[procedure] (get-mouse-state-raw) → [bitmask x y]

See SDL_GetMouseState.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-relative-mouse-mode) → boolean
[setter] (set! (get-relative-mouse-mode) boolean)
[setter] (relative-mouse-mode-set! boolean)

See SDL_GetRelativeMouseMode.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (get-relative-mouse-state) → [list x y]
[procedure] (get-relative-mouse-state-raw) → [bitmask x y]

See SDL_GetRelativeMouseState.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (warp-mouse-global! x y)

See SDL_WarpMouseGlobal.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (warp-mouse-in-window! window x y)

See SDL_WarpMouseInWindow.

Requires sdl2 egg 0.4.0 or higher.

OpenGL

OpenGL Functions

[procedure] (gl-create-context! window) → sdl2:gl-context

See SDL_GL_CreateContext.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (gl-delete-context! gl-context)

See SDL_GL_DeleteContext.

[procedure] (gl-make-current! window gl-context)

See SDL_GL_MakeCurrent.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (gl-get-current-window) → sdl2:window

See SDL_GL_GetCurrentWindow.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (gl-get-current-context) → sdl2:gl-context

See SDL_GL_GetCurrentContext.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (gl-attribute attr) → value
[setter] (set! (gl-attribute attr) value)
[setter] (gl-attribute-set! attr value)

See SDL_GL_GetAttribute and SDL_GL_SetAttribute.

attr must be an OpenGL attribute symbol or corresponding integer.

The value's type depends on attr:

The getter and the setters signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (gl-reset-attributes!)

See SDL_GL_ResetAttributes.

Requires SDL 2.0.2 or higher.

[procedure] (gl-get-drawable-size window) → [width height]

See SDL_GL_GetDrawableSize.

This procedure returns multiple values.

Requires SDL 2.0.1 or higher.

[procedure] (gl-swap-window!)

See SDL_GL_SwapWindow.

[procedure] (gl-swap-interval) → integer
[setter] (set! (gl-swap-interval) interval)
[setter] (gl-set-swap-interval! interval)

See SDL_GL_GetSwapInterval and SDL_GL_SetSwapInterval.

The setters signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (gl-extension-supported? name-string) → boolean

See SDL_GL_ExtensionSupported.

[procedure] (gl-bind-texture! texture) → [tex-w tex-h]

Bind the given sdl2:texture for use with the current OpenGL context. See SDL_GL_BindTexture.

Returns multiple values:

tex-w
The bound OpenGL texture's width, as a float (usually 1.0)
tex-h
The bound OpenGL texture's height, as a float (usually 1.0)

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (gl-unbind-texture! texture)

Unbind the given sdl2:texture from the OpenGL context. See SDL_GL_UnbindTexture.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

sdl2:gl-context

sdl2:gl-context is a record type that wraps a pointer to an SDL_GLContext struct.

[procedure] (gl-context? obj) → boolean

Returns #t if obj is an sdl2:gl-context.

Palette

sdl2:palette

sdl2:palette is a record type that wraps a pointer to an SDL_Palette struct.

[procedure] (palette? obj) → boolean

Returns #t if obj is an sdl2:palette.

[procedure] (make-palette #!optional ncolors) → sdl2:palette
[procedure] (make-palette* #!optional ncolors) → sdl2:palette

Allocate and initialize a new sdl2:palette with the given number of colors. See SDL_AllocPalette.

ncolors defaults to 256. Common values are 2 (for a 1-bit surface), 16 (for a 4-bit surface), and 256 (for an 8-bit surface).

Note: Usually you do not need to manually allocate a palette. A palette will be created for you when you create a surface with a depth of 8 or lower, and the palette will be automatically freed when the surface is freed (unless the palette is still being used by other surfaces).

Both procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (free-palette! palette)

Free the memory of the sdl2:palette's underlying struct. palette's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:palettes. It is safe (but has no effect) to free a struct record multiple times.

See SDL_FreePalette.

[procedure] (palette-ncolors palette) → integer
[procedure] (palette-ncolours palette) → integer

Returns the number of colors in the palette. Common values are 2 (for a 1-bit surface), 16 (for a 4-bit surface), and 256 (for an 8-bit surface).

[procedure] (palette-ref palette i) → sdl2:color
[setter] (set! (palette-ref palette i) color)
[setter] (palette-set! palette i color)

palette-ref returns a copy of the color at the given index of the palette, as a memory-managed sdl2:color.

The setters set the given index of the palette to a copy of the given sdl2:color.

These procedures signal an exception of kind (exn bounds) if the given index is out of bounds.

[procedure] (palette-colors palette) → vector of sdl2:colors
[procedure] (palette-colours palette) → vector of sdl2:colors
[setter] (set! (palette-colors palette) colors-vec) → boolean
[setter] (set! (palette-colours palette) colors-vec) → boolean
[setter] (palette-colors-set! colors-vec #!optional firstcolor) → boolean
[setter] (palette-colours-set! colors-vec #!optional firstcolor) → boolean

palette-colors and palette-colours return copies of all colors in the palette, as a Scheme vector of managed sdl2:colors.

The setters set multiple colors in the palette to copies of the given colors. See SDL_SetPaletteColors.

colors-vec must be a Scheme vector of sdl2:colors.

firstcolor specifies the first index of the palette to set. I.e., palette index firstcolor will be set to the first color in colors-vec, palette index firstcolor + 1 will be set to the second color, and so on. firstcolor defaults to 0. Signals an exception of kind (exn bounds) if firstcolor is out of bounds.

The set! form cannot accept the firstcolor argument.

The setters return #t if every color in colors-vec was used, or #f if some colors were not used, e.g. because there were more colors in the vector than could fit in the palette.

Pixel Format

Pixel Format Functions

[procedure] (map-rgb pixel-format r g b) → integer
[procedure] (map-rgba pixel-format r g b a) → integer

See SDL_MapRGB and SDL_MapRGBA.

[procedure] (get-rgb pixel pixel-format) → [r g b]
[procedure] (get-rgba pixel pixel-format) → [r g b a]

See SDL_GetRGB and SDL_GetRGBA.

These procedures return multiple values.

[procedure] (pixel-format-enum-to-masks format-enum) → [bpp rmask gmask bmask amask]

See SDL_PixelFormatEnumToMasks.

format-enum must be a pixel format symbol or equivalent integer.

This procedure returns multiple values:

bpp
The color depth (bits per pixel) of the format.
rmask
The red mask of the format.
gmask
The green mask of the format.
bmask
The blue mask of the format.
amask
The alpha mask of the format.

Signals an exception of kind (exn sdl2) if conversion was not possible.

sdl2:pixel-format

sdl2:pixel-format is a record type that wraps a pointer to an SDL_PixelFormat struct.

[procedure] (pixel-format? obj) → boolean

Returns #t if obj is an sdl2:pixel-format.

[procedure] (make-pixel-format #!optional format) → sdl2:pixel-format
[procedure] (make-pixel-format* #!optional format) → sdl2:pixel-format

Allocate and initialize a new sdl2:pixel-format with the given format.

format defaults to 'unknown. It must be a pixel format symbol or equivalent integer. See SDL_AllocFormat.

Both procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (free-pixel-format! pixel-format)

Free the memory of the sdl2:pixel-format's underlying struct. pixel-format's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:pixel-formats. It is safe (but has no effect) to free a struct record multiple times.

See SDL_FreeFormat.

[procedure] (pixel-format-format pixel-format) → symbol
[procedure] (pixel-format-format-raw pixel-format) → integer

Get the sdl2:pixel-format's "format" field.

[procedure] (pixel-format-palette pixel-format) → sdl2:palette or #f
[setter] (set! (pixel-format-palette pixel-format) val)
[setter] (pixel-format-palette-set! pixel-format val)

Get or set the sdl2:pixel-format's "palette" field, as an sdl2:palette, or #f if it does not have a palette. Only sdl2:pixel-formats with bits-per-pixel of 8 or less can have a palette.

See SDL_SetPixelFormatPalette.

The setters signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (pixel-format-bits-per-pixel pixel-format) → integer

Get the sdl2:pixel-format's "bits-per-pixel" field, as an integer. Common values are 32, 24, 16, 15, 8, 4, and 1.

[procedure] (pixel-format-bytes-per-pixel pixel-format) → integer

Get the sdl2:pixel-format's "bits-per-pixel" field, as an integer. Possible values are 4, 3, 2, and 1.

[procedure] (pixel-format-rmask pixel-format) → integer

Get the sdl2:pixel-format's "rmask" (red mask) field, as a nonnegative integer.

[procedure] (pixel-format-gmask pixel-format) → integer

Get the sdl2:pixel-format's "gmask" (green mask) field, as a nonnegative integer.

[procedure] (pixel-format-bmask pixel-format) → integer

Get the sdl2:pixel-format's "bmask" (blue mask) field, as a nonnegative integer.

[procedure] (pixel-format-amask pixel-format) → integer

Get the sdl2:pixel-format's "amask" (alpha mask) field, as a nonnegative integer. It will be 0 if there is no alpha channel.

Rect / Point

Rect / Point Functions

[procedure] (rect-empty? rect) → boolean

Returns #t if rect's width and/or height is less than or equal to zero. See SDL_RectEmpty.

[procedure] (point-in-rect? point rect) → boolean

Returns #t if the sdl2:point is inside the sdl2:rect, or #f if it is not. See SDL_PointInRect.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.2.0 or higher.

[procedure] (enclose-points points #!optional clip result-rect) → [rect any-enclosed?]

See SDL_EnclosePoints.

points must be a list of sdl2:points.

clip must be either an sdl2:rect or #f (the default). If clip is an sdl2:rect, points outside the clip rect will be ignored.

If result-rect is omitted or #f, a new managed sdl2:rect will be returned. If result-rect is an sdl2:rect, it will be modified and returned. It is safe for result-rect to be the same object as clip, in which case clip will be modified and returned.

This procedure returns multiple values:

rect
An sdl2:rect that encloses all matching points. This will be the same object as result-rect, if result-rect was specified.
any-enclosed?
#t if any points were enclosed, or #f if all points were clipped
[procedure] (has-intersection? rect1 rect2) → boolean

Returns #t if rect1 and rect2 intersect, or #f if they do not. See SDL_HasIntersection.

[procedure] (intersect-rect rect1 rect2 #!optional result-rect) → [rect intersect?]

Calculates the intersection of rect1 and rect2. See SDL_IntersectRect.

If result-rect is omitted or #f, a new managed sdl2:rect will be returned. If result-rect is an sdl2:rect, it will be modified and returned. It is safe for result-rect to be the same object as rect1 or rect2, in which case rect1 or rect2 will be modified and returned. It is safe (but useless) for rect1 and rect2 to be the same object.

This procedure returns multiple values:

rect
An sdl2:rect of the intersection of rect1 and rect2. This will be the same object as result-rect, if result-rect was specified.
intersect?
#t if rect1 and rect2 intersect, otherwise #f
[procedure] (intersect-rect-and-line rect x1 y1 x2 y2) → [intersect? x1-new y1-new x2-new y2-new]

Calculates the intersection between rect and the line segment described by x1, y1, x2, and y2. See SDL_IntersectRectAndLine.

rect must be an sdl2:rect. x1, y1, x2, and y2 should be integers.

This procedure returns multiple values:

intersect?
#t if the line segment intersects with the rect, otherwise #f
x1-new
integer x1 of the new line segment
y1-new
integer y1 of the new line segment
x2-new
integer x2 of the new line segment
y2-new
integer y2 of the new line segment

If the line segment does not intersect the rect, then intersect? will be #f, and x1-new, y1-new, x2-new, and y2-new will be the same as the original arguments.

[procedure] (union-rect rect1 rect2 #!optional result-rect) → rect

See SDL_UnionRect.

If result-rect is omitted or #f, a new managed sdl2:rect will be returned. If result-rect is an sdl2:rect, it will be modified and returned. It is safe for result-rect to be the same object as rect1 or rect2, in which case rect1 or rect2 will be modified and returned. It is safe (but useless) for rect1 and rect2 to be the same object.

sdl2:rect

sdl2:rect is a record type that wraps a pointer to an SDL_Rect struct.

[procedure] (rect? obj) → boolean

Returns #t if obj is an sdl2:rect.

[procedure] (make-rect #!optional x y w h) → sdl2:rect
[procedure] (make-rect* #!optional x y w h) → sdl2:rect

Allocate and initialize a new sdl2:rect.

x, y, w, and h must be integers in the range -2147483648 to 2147483647 (inclusive). They all default to 0.

[procedure] (free-rect! rect)

Free the memory of the sdl2:rect's underlying struct. rect's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:rects. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (rect-x rect) → integer
[setter] (set! (rect-x rect) val)
[setter] (rect-x-set! rect val)

Get or set the sdl2:rect's "x" field, as an integer in the range -2147483648 to 2147483647 (inclusive).

[procedure] (rect-y rect) → integer
[setter] (set! (rect-y rect) val)
[setter] (rect-y-set! rect val)

Get or set the sdl2:rect's "y" field, as an integer in the range -2147483648 to 2147483647 (inclusive).

[procedure] (rect-w rect) → integer
[setter] (set! (rect-w rect) val)
[setter] (rect-w-set! rect val)

Get or set the sdl2:rect's "w" (width) field, as an integer in the range -2147483648 to 2147483647 (inclusive).

[procedure] (rect-h rect) → integer
[setter] (set! (rect-h rect) val)
[setter] (rect-h-set! rect val)

Get or set the sdl2:rect's "h" (height) field, as an integer in the range -2147483648 to 2147483647 (inclusive).

sdl2:rect Operations

These are operations for efficiently and conveniently working with sdl2:rects. Many of them are implemented in C for efficiency.

[procedure] (rect-set! rect #!optional x y w h) → rect

Efficient and convenient way of setting multiple fields of the sdl2:rect. Any arguments that are #f will cause no change to that field. E.g. (rect-set! my-rect 42 #f 1337 #f) will set the "x" field to 42 and the "w" field to 1337, but will not change the "y" or "h" fields. Returns rect after it is modified.

[procedure] (rect->list rect) → list of integers

Returns a list (x y w h) containing the value of each field of the sdl2:rect.

[procedure] (rect->values rect) → [x y w h]

Returns multiple values containing the value of each field of the sdl2:rect. This is useful for destructuring an sdl2:rect using receive or let-values.

[procedure] (rect=? rect1 rect2) → boolean

Efficiently compare two sdl2:rects. Returns #t if the value of every field in rect1 is equal to the value of the corresponding field in rect2. See SDL_RectEquals.

[procedure] (rect-copy src) → sdl2:rect
[procedure] (rect-copy! src dest) → dest

rect-copy efficiently copies the values of src into a new managed sdl2:rect. rect-copy! efficiently copies the values of src into dest, and returns the modified dest. It is safe (but useless) for src and dest to be the same object.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-scale rect factor) → sdl2:rect
[procedure] (rect-scale! rect factor #!optional dest) → dest

Efficiently multiply the X, Y, W, and H values of rect by factor (a float or integer). E.g. factor 0.5 halves the values, factor 2.0 doubles the values. sdl2:rect can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-unscale rect factor) → sdl2:rect
[procedure] (rect-unscale! rect factor #!optional dest) → dest

Efficiently divide the X, Y, W, and H values of rect by factor (a float or integer). This is equivalent to (rect-scale rect (/ 1 factor)), but is more convenient and efficient (especially if factor is an integer).

These procedures signal an exception if factor is 0. sdl2:rect can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-move rect dx dy) → sdl2:rect
[procedure] (rect-move! rect dx dy #!optional dest) → dest

Efficiently move rect by adding the given amounts to its X and Y values. dx and dy must be integers. The results will be clamped to the range -2147483648 to 2147483647.

If dx and dy are already stored in an sdl2:point, it is more efficient and convenient to use rect-add-point or rect-sub-point, instead of extracting the individual fields from the point.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-add-point rect point) → sdl2:rect
[procedure] (rect-add-point! rect point #!optional dest) → dest

Efficiently move rect by adding point to rect's X and Y values. The results will be clamped to the range -2147483648 to 2147483647.

If the dx and dy values are already held as separate variables, it is more efficient and convenient to use rect-move, instead of creating an sdl2:point.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-sub-point rect point) → sdl2:rect
[procedure] (rect-sub-point! rect point #!optional dest) → dest

Efficiently move rect by subtracting point from rect's X and Y values. The results will be clamped to the range -2147483648 to 2147483647.

If the dx and dy values are already held as separate variables, it is more efficient and convenient to negate the values and use rect-move, instead of creating an sdl2:point.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-grow rect dw dh) → sdl2:rect
[procedure] (rect-grow! rect dw dh #!optional dest) → dest

Efficiently increase rect's size by adding to its W and H values. The rect's top left corner will stay the same. See also rect-grow/center!, which keeps the rect's center point the same. The results will be clamped to the range -2147483648 to 2147483647.

dw and dh must be integers. Negative numbers cause the size to decrease (i.e. shrink).

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-grow/center rect dw dh) → sdl2:rect
[procedure] (rect-grow/center! rect dw dh #!optional dest) → dest

Efficiently increase rect's size while trying to keep the same center point. See also rect-grow!, which keeps the rect's top left corner the same. The results will be clamped to the range -2147483648 to 2147483647.

dw and dh must be integers. Negative numbers cause the size to decrease (i.e. shrink).

For best results, use even numbers for dw and dh. If dw or dh are odd numbers, the rect's center point will change by half a pixel due to rounding.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-lerp rect1 rect2 t) → sdl2:rect
[procedure] (rect-lerp! rect1 rect2 t #!optional dest) → dest

Efficient linear interpolation (or extrapolation) between rect1 and rect2. sdl2:rect can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

These procedures affect all values of the rect: X, Y, W, and H. If you only want to interpolate the rect's position (X and Y), use rect-lerp-xy instead.

t is the interpolation factor (a float). Values of t between 0 and 1 will interpolate between rect1 and rect2. Values of t less that 0 will extrapolate beyond rect1 (moving away from rect2). Values greater that 1 will extrapolate beyond rect2 (moving away from rect1).

Requires sdl2 egg 0.2.0 or higher.

[procedure] (rect-lerp-xy rect1 rect2 t) → sdl2:rect
[procedure] (rect-lerp-xy! rect1 rect2 t #!optional dest) → dest

Efficient linear interpolation (or extrapolation) between rect1 and rect2. sdl2:rect can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

These procedures only affect the X and Y values of the rect. The result will have the same W and H as rect1. If you want interpolate all values (X, Y, W, and H), use rect-lerp instead.

t is the interpolation factor (a float). Values of t between 0 and 1 will interpolate between rect1 and rect2. Values of t less that 0 will extrapolate beyond rect1 (moving away from rect2). Values greater that 1 will extrapolate beyond rect2 (moving away from rect1).

Requires sdl2 egg 0.2.0 or higher.

sdl2:point

sdl2:point is a record type that wraps a pointer to an SDL_Point struct.

[procedure] (point? obj) → boolean

Returns #t if obj is an sdl2:point.

[procedure] (make-point #!optional x y) → sdl2:point
[procedure] (make-point* #!optional x y) → sdl2:point

Allocate and initialize a new sdl2:point.

x and y must be integers in the range -2147483648 to 2147483647 (inclusive). They both default to 0.

[procedure] (free-point! point)

Free the memory of the sdl2:point's underlying struct. point's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:points. It is safe (but has no effect) to free a struct record multiple times.

[procedure] (point-x point) → integer
[setter] (set! (point-x point) val)
[setter] (point-x-set! point val)

Get or set the sdl2:point's "x" field, as an integer in the range -2147483648 to 2147483647 (inclusive).

[procedure] (point-y point) → integer
[setter] (set! (point-y point) val)
[setter] (point-y-set! point val)

Get or set the sdl2:point's "y" field, as an integer in the range -2147483648 to 2147483647 (inclusive).

sdl2:point Operations

These are operations for efficiently and conveniently working with sdl2:points. Many of them are implemented in C for efficiency.

[procedure] (point-set! point #!optional x y) → point

Efficient and convenient way of setting multiple fields of the sdl2:point. Any arguments that are #f will cause no change to that field. E.g. (point-set! my-point 42 #f) will set the "x" field to 42, but will not change the "y" field. Returns point after it is modified.

[procedure] (point->list point) → list of integers

Returns a list (x y) containing the value of each field of the sdl2:point.

[procedure] (point->values point) → [x y]

Returns multiple values containing the value of each field of the sdl2:point. This is useful for destructuring an sdl2:point using receive or let-values.

[procedure] (point=? point1 point2) → boolean

Efficiently compare two sdl2:points. Returns #t if the value of every field in point1 is equal to the value of the corresponding field in point2.

[procedure] (point-copy src) → sdl2:point
[procedure] (point-copy! src dest) → dest

point-copy efficiently copies the values of src into a new managed sdl2:point. point-copy! efficiently copies the values of src into dest, and returns the modified dest. It is safe (but useless) for src and dest to be the same object.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (point-scale point factor) → sdl2:point
[procedure] (point-scale! point factor #!optional dest) → dest

Efficiently multiply the X and Y values of point by factor (a float or integer). E.g. factor 0.5 halves the values, factor 2.0 doubles the values. sdl2:point can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (point-unscale point factor) → sdl2:point
[procedure] (point-unscale! point factor #!optional dest) → dest

Efficiently divide the X and Y values of point by factor (a float or integer). This is equivalent to (point-scale point (/ 1 factor)), but is more convenient and efficient (especially if factor is an integer).

These procedures signal an exception if factor is 0. sdl2:point can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (point-move point dx dy) → sdl2:point
[procedure] (point-move! point dx dy #!optional dest) → dest

Efficiently move point by adding the given amounts to its X and Y values. dx and dy must be integers. The results will be clamped to the range -2147483648 to 2147483647.

If dx and dy are already stored in an sdl2:point, it is more efficient and convenient to use point-add or point-sub, instead of extracting the individual fields from the point.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (point-add point1 point2) → sdl2:point
[procedure] (point-add! point1 point2 #!optional dest) → dest

Efficiently add point1 and point2 (vector addition). The results will be clamped to the range -2147483648 to 2147483647.

If the dx and dy values are already held as separate variables, it is more efficient and convenient to use point-move, instead of creating an sdl2:point.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (point-sub point1 point2) → sdl2:point
[procedure] (point-sub! point1 point2 #!optional dest) → dest

Efficiently subtract point2 from point1 (vector subtraction). The results will be clamped to the range -2147483648 to 2147483647.

If the dx and dy values are already held as separate variables instead, it is more efficient and convenient to negate the values and use point-move, instead of creating an sdl2:point.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (point-lerp point1 point2 t) → sdl2:point
[procedure] (point-lerp! point1 point2 t #!optional dest) → dest

Efficient linear interpolation (or extrapolation) between point1 and point2. sdl2:point can only hold integer values, so the results will be truncated to integers. The results will be clamped to the range -2147483648 to 2147483647.

t is the interpolation factor (a float). Values of t between 0 and 1 will interpolate between point1 and point2. Values of t less that 0 will extrapolate beyond point1 (moving away from point2). Values greater that 1 will extrapolate beyond point2 (moving away from point1).

Requires sdl2 egg 0.2.0 or higher.

Renderer

Renderer is one part of 2D Accelerated Rendering. See also Texture.

Renderer support is available in sdl2 egg 0.2.0 and higher.

Renderer Functions

[procedure] (create-renderer! window #!optional index flags) → sdl2:renderer

Create a new sdl2:renderer associated with the given window. See SDL_CreateRenderer.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (create-software-renderer! surface) → sdl2:renderer

Create a sdl2:renderer which renders onto the given sdl2:surface. See SDL_CreateSoftwareRenderer.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (destroy-renderer! renderer)

See SDL_DestroyRenderer.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (create-window-and-renderer! width height #!optional window-flags) → [window renderer]

Create a sdl2:window and a sdl2:renderer that renders to the window. This is more convenient, but less flexible, than using create-window! and then create-renderer!. See SDL_CreateWindowAndRenderer.

width and height must be inditegers specifying the height of the window and renderer to create.

window-flags defaults to '(). It must be a list of zero or more window flag symbols (or an equivalent integer bitfield).

This procedure returns multiple values:

window
The sdl2:window that was created.
renderer
The sdl2:renderer that was created.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (get-renderer window) → sdl2:renderer

Return the renderer associated with the given sdl2:window. See SDL_GetRenderer.

Note: The returned renderer will be a new sdl2:renderer record pointing to the address of the existing renderer. It will be struct-eq? to other sdl2:renderer records for the same renderer, but not eq?.

Signals an exception of kind (exn sdl2) if the window does not have a renderer, or if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (num-render-drivers) → integer

See SDL_GetNumRenderDrivers.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-driver-info index) → sdl2:renderer-info

See SDL_GetRenderDriverInfo.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-present! renderer)

Update the renderer to show any changes that have occurred. See SDL_RenderPresent.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-copy! renderer texture #!optional srcrect dstrect) →

Copy all or part of the given texture onto the renderer. See SDL_RenderCopy.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-copy-ex! renderer texture #!optional srcrect dstrect angle center flip)

Copy all or part of the given texture onto the renderer, optionally rotating or flipping the texture. See SDL_RenderCopyEx.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-read-pixels-raw renderer rect format pixels-out pitch)

Read the pixels from some or all of the given renderer. This is for advanced users, and must be used with caution. See SDL_RenderReadPixels.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-clear! renderer)

Clear the entire renderer, using the renderer's current draw color. See SDL_RenderClear.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-draw-line! renderer x1 y1 x2 y2)
[procedure] (render-draw-lines! renderer points)

Draw a line segment or multiple line segments, using the renderer's current draw color and blend mode. See SDL_RenderDrawLine and SDL_RenderDrawLines.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-draw-point! renderer x y)
[procedure] (render-draw-points! renderer points)

Draw one or multiple points, using the renderer's current draw color and blend mode. See SDL_RenderDrawPoint and SDL_RenderDrawPoints.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-draw-rect! renderer rect)
[procedure] (render-draw-rects! renderer rects)

Draw one or multiple outlined rectangles, using the renderer's current draw color and blend mode. See SDL_RenderDrawRect and SDL_RenderDrawRects.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-fill-rect! renderer rect)
[procedure] (render-fill-rects! renderer rects)

Draw one or multiple filled rectangles, using the renderer's current draw color and blend mode. See SDL_RenderFillRect and SDL_RenderFillRects.

Requires sdl2 egg 0.2.0 or higher.

sdl2:renderer

sdl2:renderer is a record type that wraps a pointer to an SDL_Renderer struct. sdl2:renderer is available in sdl2 egg 0.2.0 and higher.

[procedure] (renderer? obj) → boolean

Returns #t if obj is an sdl2:renderer.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-draw-blend-mode renderer) → symbol or integer
[procedure] (render-draw-blend-mode-raw renderer) → integer
[setter] (set! (render-draw-blend-mode renderer) mode)
[setter] (render-draw-blend-mode-set! renderer mode)

Get or set the renderer's draw blend mode. This affects future drawing operations. See SDL_GetRenderDrawBlendMode and SDL_SetRenderDrawBlendMode.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-draw-color renderer) → sdl2:color
[procedure] (render-draw-colour renderer) → sdl2:color
[setter] (set! (render-draw-color renderer) color)
[setter] (set! (render-draw-colour renderer) color)
[setter] (render-draw-color-set! renderer color)
[setter] (render-draw-colour-set! renderer color)

Get or set the renderer's draw color. This affects future drawing operations. See SDL_GetRenderDrawColor and SDL_SetRenderDrawColor.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-clip-rect renderer) → sdl2:rect
[setter] (set! (render-clip-rect renderer) rect)
[setter] (render-clip-rect-set! renderer rect)

Get or set the sdl2:renderer's clip rect. See SDL_RenderGetClipRect and SDL_RenderSetClipRect.

render-clip-rect returns a new managed sdl2:rect describing the renderer's clip rect. If clipping is disabled, it returns #<sdl2:rect (0 0 0 0)>.

But, be advised that it also returns #<sdl2:rect (0 0 0 0)> if that is the current clip rect. So, the meaning of #<sdl2:rect (0 0 0 0)> is ambiguous. Use render-clip-enabled? (in SDL 2.0.4 or higher) to unambiguously check whether clipping is enabled or disabled.

The setters accept either an sdl2:rect to enable clipping and set the clip rect, or #f to disable clipping. Setting to #<sdl2:rect (0 0 0 0)> does not disable clipping.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-clip-enabled? renderer) → boolean

Returns #t if clipping is enabled for the given sdl2:renderer, or #f is clipping is disabled. See SDL_RenderIsClipEnabled.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.2.0 or higher.

[procedure] (render-integer-scale? renderer) → boolean
[setter] (set! (render-integer-scale? renderer) boolean)
[setter] (render-integer-scale-set! renderer boolean)

See SDL_RenderIntegerScale.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (renderer-output-size renderer) → [w h]

See SDL_GetRendererOutputSize. This procedure returns multiple values, the output width and height, as integers.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-logical-size renderer) → [w h]
[setter] (set! (render-logical-size renderer) size)
[setter] (render-logical-size-set! renderer size)

Get or set the renderer's logical size. See SDL_RenderGetLogicalSize and SDL_RenderSetLogicalSize.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-scale renderer) → [x-scale y-scale]
[setter] (set! (render-scale-set! renderer) scales)
[setter] (render-scale-set! renderer scales)

Get or set the sdl2:renderer's x and y scaling factors. See SDL_RenderGetScale and SDL_RenderSetScale.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-target-supported? renderer) → boolean

Returns #t if the given renderer can have a render target. See SDL_RenderTargetSupported.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-target renderer) → sdl2:texture or #f
[setter] (set! (render-target renderer) target)
[setter] (render-target-set! renderer target)

Get or set the renderer's render target, i.e. the texture that the renderer will render onto. See SDL_GetRenderTarget and SDL_SetRenderTarget.

render-target returns #f if the renderer has no render target.

The setters signal an exception of kind (exn sdl2) on failure, for example if the renderer does not support a render target. You should use render-target-supported? to test whether the renderer supports a render target.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (render-viewport renderer) → sdl2:rect
[setter] (set! (render-viewport renderer) rect)
[setter] (render-viewport-set! renderer rect)

Get or set the renderer's viewport. See SDL_RenderGetViewport and SDL_RenderSetViewport.

Requires sdl2 egg 0.2.0 or higher.

sdl2:renderer-info

sdl2:renderer-info is a record type that wraps a pointer to an SDL_RendererInfo struct. sdl2:renderer-info is available in sdl2 egg 0.2.0 and higher.

[procedure] (renderer-info? obj) → boolean

Returns #t if obj is an sdl2:renderer-info.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (get-renderer-info renderer) → sdl2:renderer-info
[procedure] (get-renderer-info* renderer) → sdl2:renderer-info

Return a sdl2:renderer-info with information about the given sdl2:renderer. See SDL_GetRendererInfo.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (free-renderer-info! renderer-info)

Free the memory of the sdl2:renderer-info's underlying struct. renderer-info's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:renderer-infos. It is safe (but has no effect) to free a struct record multiple times.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (renderer-info-name renderer-info) → string

Get the sdl2:renderer-info's "name" field, as a string.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (renderer-info-flags renderer-info) → list of symbols
[procedure] (renderer-info-flags-raw renderer-info) → integer

Get the sdl2:renderer-info's "flags" field.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (renderer-info-num-texture-formats renderer-info) → integer

Get the sdl2:renderer-info's "num-texture-formats" field, as an integer.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (renderer-info-texture-formats renderer-info) → list of symbols
[procedure] (renderer-info-texture-formats-raw renderer-info) → list of integers

Get the sdl2:renderer-info's "texture-formats" field.

Requires sdl2 egg 0.2.0 or higher. Before sdl2 egg 0.4.0, this procedure returned a pointer to a C array.

[procedure] (renderer-info-max-texture-width renderer-info) → integer

Get the sdl2:renderer-info's "max-texture-width" field, as an integer.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (renderer-info-max-texture-height renderer-info) → integer

Get the sdl2:renderer-info's "max-texture-height" field, as an integer.

Requires sdl2 egg 0.2.0 or higher.

RWops

RWops Functions

[procedure] (rw-from-file filepath) → sdl2:rwops

See SDL_RWFromFile.

You should close the sdl2:rwops when you are done with it, using rw-close! or one of the procedures that can automatically close the sdl2:rwops, such as load-bmp-rw.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (rw-from-const-mem pointer) → sdl2:rwops

See SDL_RWFromConstMem.

You should close the sdl2:rwops when you are done with it, using rw-close! or one of the procedures that can automatically close the sdl2:rwops, such as load-bmp-rw.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (rw-from-mem pointer) → sdl2:rwops

See SDL_RWFromMem.

You should close the sdl2:rwops when you are done with it, using rw-close! or one of the procedures that can automatically close the sdl2:rwops, such as load-bmp-rw.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (rw-from-blob blob) → sdl2:rwops

Create a new sdl2:rwops that accesses the memory of the given blob. You should close the sdl2:rwops when you are done with it, using rw-close! or one of the procedures that can automatically close the sdl2:rwops, such as load-bmp-rw.

Signals an exception of kind (exn sdl2) if an error occurs.

You can also use this procedure to create a sdl2:rwops from a SRFI-4 numeric vector, by first converting it to a blob using e.g. u8vector->blob/shared.

Caution: Creating a sdl2:rwops from a blob in CHICKEN-managed memory is unstable: the blob might be garbage collected or moved in memory, which would break the sdl2:rwops. To be safe, you should object-evict the blob and create the sdl2:rwops from the evicted blob (not the original). You may wish to object-release the evicted blob after you have closed the sdl2:rwops. Example:

(let* ((evicted-blob (object-evict '#${...}))
       (rwops (sdl2:rw-from-blob evicted-blob))
       (surf (sdl2:load-bmp-rw rwops #t)))
  (object-release evicted-blob)
  surf)
[procedure] (rw-from-string str) → sdl2:rwops

Create a new sdl2:rwops that accesses the memory of the given CHICKEN Scheme string. You should close the sdl2:rwops when you are done with it, using rw-close! or one of the procedures that can automatically close the sdl2:rwops, such as load-bmp-rw.

Signals an exception of kind (exn sdl2) if an error occurs.

Caution: Creating a sdl2:rwops from a string in CHICKEN-managed memory is unstable: the string might be garbage collected or moved in memory, which would break the sdl2:rwops. To be safe, you should object-evict the string and create the sdl2:rwops from the evicted string (not the original). You may wish to object-release the evicted string after you have closed the sdl2:rwops. Example:

(let* ((evicted-string (object-evict "..."))
       (rwops (sdl2:rw-from-string evicted-string))
       (surf (sdl2:load-bmp-rw rwops #t)))
  (object-release evicted-string)
  surf)
[procedure] (rw-close! rwops)

See SDL_RWclose.

Close and clean up the given sdl2:rwops. This frees the memory used by the SDL_RWops struct itself, but does not free or release the pointer, blob, or string that the sdl2:rwops was reading/writing from. (It does close files opened with rw-from-file, though.)

Signals an exception of kind (exn sdl2) if an error occurs.

sdl2:rwops

sdl2:rwops is a record type that wraps a pointer to an SDL_RWops struct.

[procedure] (rwops? obj) → boolean

Returns #t if obj is an sdl2:rwops.

[procedure] (rwops-type rwops) → symbol
[procedure] (rwops-type-raw rwops) → integer

Get the sdl2:rwops' "type" field, indicating the data source type.

Surface

Surface Functions

[procedure] (create-rgb-surface* flags width height depth rmask gmask bmask amask) → sdl2:surface

Returns a new unmanaged sdl2:surface with the given properties. See SDL_CreateRGBSurface.

See make-surface for a more convenient interface.

Signals an exception of kind (exn sdl2) if the surface cannot be created.

[procedure] (create-rgb-surface-from* pixels width height depth pitch rmask gmask bmask amask) → sdl2:surface

Returns a new unmanaged sdl2:surface with the given properties, using existing pixel data (a pointer, e.g. from surface-pixels-raw). See SDL_CreateRGBSurfaceFrom.

Signals an exception of kind (exn sdl2) if the surface cannot be created.

[procedure] (create-rgb-surface-with-format* flags width height depth format) → sdl2:surface

Returns a new unmanaged sdl2:surface with the given properties. See SDL_CreateRGBSurfaceWithFormat.

See make-surface for a more convenient interface.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (create-rgb-surface-with-format-from* pixels width height depth pitch format) → sdl2:surface

Returns a new unmanaged sdl2:surface with the given properties, using existing pixel data (a pointer, e.g. from surface-pixels-raw). See SDL_CreateRGBSurfaceWithFormatFrom.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (convert-surface surface pixel-format) → sdl2:surface
[procedure] (convert-surface* surface pixel-format) → sdl2:surface

Creates a copy of the given sdl2:surface, but converts it to the given sdl2:pixel-format.

See SDL_ConvertSurface.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (duplicate-surface surface) → sdl2:surface
[procedure] (duplicate-surface* surface) → sdl2:surface

Returns a new surface with the same data and format as the given surface.

With SDL 2.0.6, this uses SDL_DuplicateSurface. With earlier SDL versions, it uses SDL_ConvertSurface.

Requires sdl2 egg version 0.4.0 or higher.

[procedure] (load-bmp filepath) → sdl2:surface
[procedure] (load-bmp* filepath) → sdl2:surface

Attempts to load a BMP image file. Returns a sdl2:surface containing the image data. See SDL_LoadBMP.

Note: This procedure only supports certain kinds of BMP image. Use the sdl2-image egg for better BMP support, plus support for loading other image formats like JPG, PNG, and GIF.

Signals an exception of kind (exn sdl2) if the image could not be loaded.

[procedure] (load-bmp-rw rwops #!optional close?) → sdl2:surface
[procedure] (load-bmp-rw* rwops #!optional close?) → sdl2:surface

Attempts to load a BMP image from the given sdl2:rwops. Returns a sdl2:surface containing the image data. See SDL_LoadBMP_RW.

If close? is #t, rwops will be automatically closed (see rw-close!) after the image is loaded. If close? is #f or omitted, rwops will not be closed.

Note: This procedure only supports certain kinds of BMP image. Use the sdl2-image egg for better BMP support, plus support for loading other image formats like JPG, PNG, and GIF.

Signals an exception of kind (exn sdl2) if the image could not be loaded.

[procedure] (save-bmp! surface filepath)

See SDL_SaveBMP.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (save-bmp-rw! surface rwops #!optional close?)

See SDL_SaveBMP_RW.

If close? is #t, rwops will be automatically closed (see rw-close!) after the image is loaded. If close? is #f or omitted, rwops will not be closed.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (lock-surface! surface)
[procedure] (unlock-surface! surface)

See SDL_LockSurface and SDL_UnlockSurface.

lock-surface! signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (must-lock? surface) → boolean

See SDL_MUSTLOCK.

[procedure] (blit-surface! src src-rect dst dst-rect)

Blit (copy) image data from the src (source) sdl2:surface to the dst (destination) sdl2:surface. See SDL_BlitSurface.

If dst-rect is a sdl2:rect, it will be modified to save the final blit rectangle after all clipping is performed.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (blit-scaled! src src-rect dest dest-rect)

Blit (copy) image data from the src (source) sdl2:surface to the dst (destination) sdl2:surface, scaling the image if needed. See SDL_BlitScaled.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (fill-rect! surface rect color)

See SDL_FillRect.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (fill-rects! surface rects color)

See SDL_FillRects.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (surface-ref surface x y) → sdl2:color
[procedure] (surface-ref-raw surface x y) → integer
[setter] (set! (surface-ref surface x y) color)
[setter] (surface-set! surface x y color)

Get or set the color of the specified pixel on the surface.

These procedures automatically lock and unlock the surface if needed. They signal an exception of kind (exn sdl2) if the surface cannot be locked.

These procedures signal an exception of kind (exn bounds) if x or y is out of bounds.

The setters ignore the surface's clip rect.

[procedure] (rotate-surface-90 surface turns) → sdl2:surface
[procedure] (rotate-surface-90* surface turns) → sdl2:surface

Return a copy of the given surface rotated by the given number of 90° clockwise turns. turns must be an integer. For example:

The new surface will have an equivalent pixel format, color key, blend mode, alpha mod, and color mod as the given surface. If the given surface has a palette, the new surface will share the same palette. The new surface will have no clip rect.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (flip-surface surface flip-x? flip-y?) → sdl2:surface
[procedure] (flip-surface* surface flip-x? flip-y?) → sdl2:surface

Return a copy of the given surface flipped on the X (horizontal) and/or Y (vertical) axes.

The new surface will have an equivalent pixel format, color key, blend mode, alpha mod, and color mod as the given surface. If the given surface has a palette, the new surface will share the same palette. The new surface will have no clip rect.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (compose-custom-blend-mode src-color-factor dst-color-factor color-operation src-alpha-factor dst-alpha-factor alpha-operation) → integer

See SDL_ComposeCustomBlendMode.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-yuv-conversion-mode) → symbol
[procedure] (get-yuv-conversion-mode-raw) → integer
[setter] (set! (get-yuv-conversion-mode) mode)
[setter] (yuv-conversion-mode-set! mode)

See SDL_GetYUVConversionMode and SDL_SetYUVConversionMode.

Requires SDL 2.0.8 or higher, and sdl2 egg 0.4.0 or higher.

sdl2:surface

sdl2:surface is a record type that wraps a pointer to an SDL_Surface struct.

[procedure] (surface? obj) → boolean

Returns #t if obj is an sdl2:surface.

[procedure] (make-surface width height depth/format) → sdl2:surface
[procedure] (make-surface* width height depth/format) → sdl2:surface

Create a new sdl2:surface with the given width, height, and color depth (bits per pixel) or pixel format. This is a more convenient interface for create-rgb-surface*.

If depth/format is an integer 64 or less, a surface of that color depth is created. The sdl2:surface's pixel format and masks will be chosen automatically based on the requested depth and the current platform's byte order (little endian or big endian).

If depth/format is a pixel format enum symbol or equivalent integer, a surface of that pixel format is created.

These procedures signal an exception of kind (exn sdl2) if the sdl2:surface could not be created (e.g. because the color depth is unsupported).

[procedure] (free-surface! surface)

Free the memory of the sdl2:surface's underlying struct. surface's pointer will be set to null (see struct-null?). It is safe to call this procedure with managed or unmanaged sdl2:surfaces. It is safe (but has no effect) to free a struct record multiple times.

See SDL_FreeSurface.

Note: if surface was created using create-rgb-surface-from, then the pixel data is not freed.

[procedure] (surface-format surface) → sdl2:pixel-format

Get the sdl2:surface's "format" field, as a sdl2:pixel-format describing the format of the surface's pixels.

[procedure] (surface-w surface) → integer

Get the sdl2:surface's "w" field, as a nonnegative integer indicating the surface's width in pixels.

[procedure] (surface-h surface) → integer

Get the sdl2:surface's "h" field, as a nonnegative integer indicating the surface's height in pixels.

[procedure] (surface-pitch surface) → integer

Get the sdl2:surface's "pitch" field, as a nonnegative integer indicating how many bytes are used to represent one row of pixel data.

[procedure] (surface-pixels-raw surface) → pointer or #f

Get the sdl2:surface's "pixels" field, as a raw pointer to the sdl2:surface's pixels. Don't use this unless you really know what you are doing!

If you want to get or set a pixel, use surface-ref and surface-set! instead. They are much safer, more convenient, and more efficient than accessing the pixel data using this pointer.

[procedure] (surface-userdata-raw surface) → pointer or #f
[setter] (set! (surface-userdata-raw surface) val)
[setter] (surface-userdata-raw-set! surface val)

Get or set the sdl2:surface's "userdata" field, as a pointer or #f.

If you want to store a pointer to a Scheme object here, be sure to evict the object first. Otherwise the object's location in memory might change, rendering the pointer invalid.

[procedure] (surface-refcount surface) → integer
[setter] (set! (surface-refcount surface) val)
[setter] (surface-refcount-set! surface val)

Get or set the sdl2:surface's "refcount" field, as an integer.

[procedure] (surface-clip-rect surface) → sdl2:rect
[setter] (set! (surface-clip-rect surface) rect) → boolean
[setter] (surface-clip-rect-set! surface rect) → boolean

surface-clip-rect returns a copy of the surface's clip rect. See SDL_GetClipRect.

The setters sets the surface's clip rect to a copy of the given rect. rect may be #f, which disables clipping. See SDL_SetClipRect.

The setters return #t if the given rect intersects the surface at all, or #f if the rect is out of bounds (completely clips out the surface).

[procedure] (surface-color-key? surface) → boolean
[procedure] (surface-colour-key? surface) → boolean

Returns #t if surface has a color key.

With SDL 2.0.9 and higher, this uses SDL_HasColorKey. With earlier SDL versions, this uses SDL_GetColorKey.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (surface-color-key surface) → sdl2:color or #f
[procedure] (surface-colour-key surface) → sdl2:color or #f
[procedure] (surface-color-key-raw surface) → integer or #f
[procedure] (surface-colour-key-raw surface) → integer or #f
[setter] (set! (surface-color-key surface) color)
[setter] (set! (surface-colour-key surface) color)
[setter] (surface-color-key-set! surface color)
[setter] (surface-colour-key-set! surface color)

Get or set the sdl2:surface's color key.

See SDL_GetColorKey and SDL_SetColorKey.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (surface-alpha-mod surface) → integer
[setter] (set! (surface-alpha-mod surface) mod)
[setter] (surface-alpha-mod-set! surface mod)

See SDL_GetSurfaceAlphaMod and SDL_SetSurfaceAlphaMod.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (surface-blend-mode surface) → symbol
[procedure] (surface-blend-mode-raw surface) → integer
[setter] (set! (surface-blend-mode surface) mode)
[setter] (surface-blend-mode-set! surface mode)

See SDL_GetSurfaceBlendMode and SDL_SetSurfaceBlendMode.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (surface-color-mod surface) → [r g b]
[procedure] (surface-colour-mod surface) → [r g b]
[setter] (set! (surface-color-mod surface) rgb)
[setter] (set! (surface-colour-mod surface) rgb)
[setter] (surface-color-mod-set! surface rgb)
[setter] (surface-colour-mod-set! surface rgb)

See SDL_GetSurfaceColorMod and SDL_SetSurfaceColorMod.

surface-color-mod and surface-colour-mod return multiple values.

The setters accept either a list (r g b) of color values, or an sdl2:color (the sdl2:color's "a" field will be ignored).

These procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (surface-palette surface) → sdl2:palette or #f
[setter] (set! (surface-palette surface) palette)
[setter] (surface-palette-set! surface palette)

surface-palette returns the surface's palette, or #f if it has no palette. It is equivalent to (compose pixel-format-palette surface-format).

The setters signal an exception of kind (exn sdl2) if an error occurs.

See SDL_SetSurfacePalette.

[procedure] (surface-rle? surface) → bool
[setter] (set! (surface-rle? surface) bool)
[setter] (surface-rle-set! surface bool)

See SDL_HasSurfaceRLE and SDL_SetSurfaceRLE.

The setter signals an exception of kind (exn sdl2) if an error occurs.

surface-rle? requires SDL 2.0.14 or higher, and sdl2 egg 0.4.0 or higher.

Texture

Texture is one part of 2D Accelerated Rendering. See also Renderer.

Renderer support is available in sdl2 egg 0.2.0 and higher.

sdl2:texture

sdl2:texture is a record type that wraps a pointer to an SDL_Texture struct.

Textures are available in sdl2 egg 0.2.0 and higher.

[procedure] (texture? obj) → boolean

Returns #t if obj is an sdl2:texture.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (create-texture renderer format access w h) → sdl2:texture
[procedure] (create-texture* renderer format access w h) → sdl2:texture

Create a new sdl2:texture using the given sdl2:renderer and settings.

These procedures signal an exception of kind (exn sdl2) if the sdl2:texture could not be created.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (create-texture-from-surface renderer surface) → sdl2:texture
[procedure] (create-texture-from-surface* renderer surface) → sdl2:texture

Create a new sdl2:texture from a sdl2:surface.

The texture will contain a copy of the pixel data from the surface. The texture will have the same color mod and alpha mod as the surface. If the surface had a color key, the texture will have 'blend blend mode; otherwise it will have the same blend mode as the surface.

These procedures signal an exception of kind (exn sdl2) if the sdl2:texture could not be created.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (destroy-texture! texture)

Destroy the sdl2:texture, freeing its underlying struct. texture's pointer will be set to null (see struct-null?). It is safe to call tihs procedure with managed on unmanaged sdl2:textures. It is safe (but has no effect) to destroy an sdl2:texture multiple times.

See SDL_DestroyTexture.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (query-texture texture) → [format access w h]
[procedure] (query-texture-raw texture) → [format-int access-int w h]

Get multiple pieces of information about the texture. See SDL_QueryTexture.

query-texture returns multiple values:

format
The sdl2:texture's pixel format, as a pixel format enum symbol
access
The sdl2:texture's access mode, as a texture access enum symbol
w
The sdl2:texture's width, as a nonnegative integer measured in pixels
h
The sdl2:texture's height, as a nonnegative integer measured in pixels

query-texture-raw is similar, except it returns raw integer values (not symbols) for format and access.

If you only want one of these pieces of information, it is more convenient and efficient to use one of these procedures instead:

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-format texture) → symbol

Get the sdl2:texture's pixel format, as a pixel format enum symbol. This is equivalent to (nth-value 0 (query-texture texture)), but more convenient and efficient.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-access texture) → symbol

Get the sdl2:texture's access mode, as a texture access enum symbol. This is equivalent to (nth-value 1 (query-texture texture)), but more convenient and efficient.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-w texture) → integer

Get the sdl2:texture's width, as a nonnegative integer measured in pixels. This is equivalent to (nth-value 2 (query-texture texture)), but more convenient and efficient.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-h texture) → integer

Get the sdl2:texture's height, as a nonnegative integer measured in pixels. This is equivalent to (nth-value 3 (query-texture texture)), but more convenient and efficient.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-alpha-mod texture) → integer
[setter] (set! (texture-alpha-mod texture) mod)
[setter] (texture-alpha-mod-set! texture mod)

See SDL_GetTextureAlphaMod and SDL_SetTextureAlphaMod.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-blend-mode texture) → symbol or integer
[procedure] (texture-blend-mode-raw texture) → integer
[setter] (set! (texture-blend-mode texture) mode)
[setter] (texture-blend-mode-set! texture mode)

See SDL_GetTextureBlendMode and SDL_SetTextureBlendMode.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (texture-color-mod texture) → [r g b]
[procedure] (texture-colour-mod texture) → [r g b]
[setter] (set! (texture-color-mod texture) rgb)
[setter] (set! (texture-colour-mod texture) rgb)
[setter] (texture-color-mod-set! texture rgb)
[setter] (texture-colour-mod-set! texture rgb)

See SDL_GetTextureColorMod and SDL_SetTextureColorMod.

texture-color-mod and texture-colour-mod return multiple values.

The setters accept either a list (r g b) of color values, or an sdl2:color (the sdl2:color's "a" field will be ignored).

These procedures signal an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (lock-texture-raw! texture rect) → [pixels pitch]

Lock the texture so that its pixel data can be overwritten. This is for advanced users, and must be used with caution. See SDL_LockTexture. See also unlock-texture!.

This procedure returns multiple values:

pixels
A raw pointer that you can write pixel data to. Does not necessarily contain the old data.
pitch
An integer indicating the pitch of the pixel data

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (unlock-texture! texture)

Unlock the texture, applying the new pixel data to the texture. This is for advanced users, and must be used with caution. See SDL_UnlockTexture. See also lock-texture-raw!.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (update-texture-raw! texture rect pixels pitch)

Overwrite part or all of the texture's pixel data. This is for advanced users, and must be used with caution. See SDL_UpdateTexture.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.2.0 or higher.

[procedure] (update-yuv-texture-raw! texture rect y-plane y-pitch u-plane u-pitch v-plane v-pitch)

Overwrite part or all of a YV12- or IYUV-formatted texture's pixel data. This is for advanced users, and must be used with caution. See SDL_UpdateYUVTexture.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.1 or higher, and sdl2 egg 0.2.0 or higher.

Timer

[procedure] (delay! milliseconds)

See SDL_Delay.

Caution: This procedure is not compatible with SRFI-18 threads. It will cause all threads to sleep for the given duration. If you are using multiple threads, you should instead call SRFI-18's thread-sleep!, which will cause only the current thread to sleep. For example, call (thread-sleep! 0.025) instead of (delay! 25).

[procedure] (get-ticks) → integer

See SDL_GetTicks.

[procedure] (get-performance-counter) → integer

See SDL_GetPerformanceCounter.

[procedure] (get-performance-frequency) → integer

See SDL_GetPerformanceFrequency.

Touch / Gesture

Touch / Gesture Functions

[procedure] (get-num-touch-devices) → integer

See SDL_GetNumTouchDevices.

[procedure] (get-touch-device device-id) → integer

See SDL_GetTouchDevice.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (get-touch-device-type touch-id) → symbol
[procedure] (get-touch-device-type-raw touch-id) → integer

See SDL_GetTouchDeviceType.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.10 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-num-touch-fingers touch-id) → integer

See SDL_GetNumTouchFingers.

[procedure] (get-touch-finger touch-id index) → sdl2:finger

See SDL_GetTouchFinger.

Signals an exception of kind (exn sdl2) if an error occurs.

sdl2:finger

sdl2:finger is a record type that wraps a pointer to an SDL_Finger struct.

[procedure] (finger? obj) → boolean

Returns #t if obj is an sdl2:finger.

[procedure] (finger-id finger) → integer

Get the sdl2:finger's "id" field, as an integer.

[procedure] (finger-x finger) → float

Get the sdl2:finger's "x" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized X position of the finger.

[procedure] (finger-y finger) → float

Get the sdl2:finger's "y" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized Y position of the finger.

[procedure] (finger-pressure finger) → float

Get the sdl2:finger's "pressure" field, as a float in the range 0.0 to 1.0 (inclusive), indicating the normalized pressure of the finger.

Version

Version Feature Identifiers

In sdl2 egg 0.2.0 and higher, the egg registers feature identifiers which can be used to detect the versions of the sdl2 egg and SDL at run time using the the feature? procedure, or at compile time using the cond-expand macro or #+foo syntax.

Some or all of the following feature identifiers will be registered depending on the circumstances:

Feature ID Meaning
sdl2 Using any version of the sdl2 egg
sdl2-0.2.0+ Using sdl2 egg 0.2.0 or higher
sdl2-0.3.0+ ... 0.3.0 or higher
sdl2-0.4.0+ ... 0.4.0 or higher
libSDL-2.0.0+ The sdl2 egg was compiled with SDL 2.0.0 or higher
libSDL-2.0.1+ ... 2.0.1 or higher
libSDL-2.0.2+ ... 2.0.2 or higher
libSDL-2.0.3+ ... 2.0.3 or higher
libSDL-2.0.4+ ... 2.0.4 or higher
libSDL-2.0.5+ ... 2.0.5 or higher
libSDL-2.0.6+ ... 2.0.6 or higher
libSDL-2.0.7+ ... 2.0.7 or higher
libSDL-2.0.8+ ... 2.0.8 or higher
libSDL-2.0.9+ ... 2.0.9 or higher
libSDL-2.0.10+ ... 2.0.10 or higher
libSDL-2.0.12+ ... 2.0.12 or higher
libSDL-2.0.14+ ... 2.0.14 or higher
libSDL-2.0.16+ ... 2.0.16 or higher

These are cumulative, so if you are using the latest version of the sdl2 egg and the latest version of SDL, all of the above identifiers will be defined.

Here are some examples of how you can use these identifiers:

;; use-for-syntax (on CHICKEN 4) or import-for-syntax (on CHICKEN 5)
;; to make the feature identifiers available at compile time.
(cond-expand
 (chicken-4 (use (prefix sdl2 "sdl2:"))
            (use-for-syntax sdl2))
 (chicken-5 (import (prefix sdl2 "sdl2:"))
            (import-for-syntax sdl2)))

;; Run-time check using feature? procedure:
(when (feature? 'sdl2)
  (print "You are using the sdl2 egg. The future seems bright."))

;; Compile time check using #+foo reader syntax:
#+(not sdl2-0.2.0+)
(begin-for-syntax
  (error "You need sdl2 egg 0.2.0 or higher."))

;; Compile-time check using cond-expand macro:
(cond-expand
 (libSDL-2.0.4+
  (include "file-that-needs-SDL-204.scm"))
 (else
  (include "alternative-file.scm")))

Version Functions

[procedure] (version-at-least? major minor patch) → boolean

See SDL_VERSION_ATLEAST.

Returns #t if the sdl2 egg was compiled with a version of SDL at least as high as specified. For example, (version-at-least? 2 0 1) returns #t if the sdl2 egg was compiled with SDL 2.0.1 or higher.

Some SDL features are only available after a certain version, so you can use this procedure to check whether the feature is available.

[procedure] (compiled-version) → list of integers
[procedure] (current-version) → list of integers

Returns a list of three nonnegative integers, indicating a version number of SDL. For example, the list (2 0 3) indicates SDL 2.0.3.

For example, the user may have compiled the sdl2 egg with SDL 2.0.3, then later upgraded SDL to 2.0.4, but not yet recompiled the sdl2 egg with the new version. In such a case, compiled-version would return (2 0 3), and current-version would return (2 0 4). But, features from the new version would not be available until the user recompiles the sdl2 egg.

See SDL_VERSION and SDL_GetVersion.

[constant] (egg-version) → list of integers

Returns a list of three nonnegative integers, indicating the version number of the sdl2 egg itself, which is independent of the version number of SDL. For example, the list (1 2 3) indicates sdl2 egg version 1.2.3.

Requires sdl2 egg 0.2.0 or higher.

Vulkan

Vulkan Functions

[procedure] (vulkan-load-library! path)

See SDL_Vulkan_LoadLibrary.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (vulkan-unload-library!)

See SDL_Vulkan_UnloadLibrary.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (vulkan-get-vk-get-instance-proc-addr) → pointer or #f

See SDL_Vulkan_GetVkGetInstanceProcAddr.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (vulkan-get-instance-extensions window) → list of strings

See SDL_Vulkan_GetInstanceExtensions.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (vulkan-get-drawable-size window) → [w h]

This procedure returns multiple values. See SDL_Vulkan_GetDrawableSize.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (vulkan-create-surface window vkinstance vksurface-out)

See SDL_Vulkan_CreateSurface.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.6 or higher, and sdl2 egg 0.4.0 or higher.

Window

Window Functions

[procedure] (create-window! title x y w h #!optional flags) → sdl2:window

See SDL_CreateWindow.

x and y can be integers, the symbol 'centered, or the symbol 'undefined.

flags defaults to '(). It must be a list of zero or more window flag symbols or an equivalent integer bitfield.

[procedure] (destroy-window! window)

See SDL_DestroyWindow.

[procedure] (get-window-from-id id) → sdl2:window

See SDL_GetWindowFromID.

Note: The returned window will be a new sdl2:window record pointing to the address of the existing window. It will be struct-eq? to other sdl2:window records for the same window, but not eq?.

In sdl2 egg 0.2.0 and higher, this procedure signals an exception of kind (exn sdl2) if there is no window with the given ID. In earlier egg versions, this procedure returned a null sdl2:window.

[procedure] (update-window-surface! window)

See SDL_UpdateWindowSurface.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (update-window-surface-rects! window rects)

See SDL_UpdateWindowSurfaceRects.

rects must be a list of sdl2:rects.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (show-window! window)

See SDL_ShowWindow.

[procedure] (hide-window! window)

See SDL_HideWindow.

[procedure] (maximize-window! window)

See SDL_MaximizeWindow.

[procedure] (minimize-window! window)

See SDL_MinimizeWindow.

[procedure] (raise-window! window)

See SDL_RaiseWindow.

[procedure] (restore-window! window)

See SDL_RestoreWindow.

[procedure] (flash-window! window operation)

See SDL_FlashWindow.

operation must be a window flash operation symbol or equivalent integer constant.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.16 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (set-window-modal-for! modal-window parent-window)

See SDL_SetWindowModalFor.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

sdl2:window

sdl2:window is a record type that wraps a pointer to an SDL_Window struct.

[procedure] (window? obj) → boolean

Returns #t if obj is an sdl2:window.

[procedure] (window-always-on-top? window) → bool
[setter] (set! (window-always-on-top? window) bool)
[setter] (window-always-on-top-set! window bool)

Get or set whether the window will always appear in front of other windows. Setting this to #t has the same effect as passing the always-on-top flag to create-window! when creating the window. Note: this has an effect only on some platforms, such as Linux.

See SDL_SetWindowAlwaysOnTop.

window-always-on-top? requires SDL 2.0.5 or higher. window-always-on-top-set! and (set! (window-always-on-top? window) ...) require SDL 2.0.16 or higher.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (window-bordered? window) → boolean
[setter] (set! (window-bordered? window) bordered)
[setter] (window-bordered-set! window bordered)

Get or set whether the window has a border (window decoration). #t means the window has a border, #f means the window is borderless.

Setting this to #f has essentially the same effect as passing the borderless flag to create-window! when creating the window.

See SDL_SetWindowBordered.

[procedure] (window-borders-size window) → [top left bottom right]

This procedure returns multiple values. See SDL_GetWindowBordersSize.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (window-brightness window) → float
[setter] (set! (window-brightness window) brightness)
[setter] (window-brightness-set! window brightness)

See SDL_GetWindowBrightness and SDL_SetWindowBrightness.

The setters signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (window-display-index window) → integer

See SDL_GetWindowDisplayIndex.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (window-display-mode window) → sdl2:display-mode
[setter] (set! (window-display-mode window) display-mode)
[setter] (window-display-mode-set! window display-mode)

See SDL_GetWindowDisplayMode and SDL_SetWindowDisplayMode.

These procedures signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (window-flags window) → list of symbols
[procedure] (window-flags-raw window) → integer

See SDL_GetWindowFlags.

[procedure] (window-fullscreen window) → symbol or #f
[setter] (set! (window-fullscreen window) mode)
[setter] (window-fullscreen-set! window mode)

Get or set the sdl2:window's fullscreen mode. See SDL_SetWindowFullscreen.

window-fullscreen returns one of the following values:

The setters accept any of the above values, or #t (which means the same as 'fullscreen), or an equivalent integer value.

The setters signal an exception of kind (exn sdl2) if an error occurs.

[procedure] (window-grab? window) → boolean
[setter] (set! (window-grab? window) grabbed)
[setter] (window-grab-set! window grabbed)

See SDL_GetWindowGrab and SDL_SetWindowGrab.

[procedure] (window-keyboard-grab? window) → boolean
[setter] (set! (window-keyboard-grab? window) grabbed)
[setter] (window-keyboard-grab-set! window grabbed)

See SDL_GetWindowKeyboardGrab and SDL_SetWindowKeyboardGrab.

Requires SDL 2.0.16 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (window-mouse-grab? window) → boolean
[setter] (set! (window-mouse-grab? window) grabbed)
[setter] (window-mouse-grab-set! window grabbed)

See SDL_GetWindowMouseGrab and SDL_SetWindowMouseGrab.

Requires SDL 2.0.16 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (grabbed-window) → sdl2:window or #f

Returns the sdl2:window that currently has input grab, or #f if no window has input grab. See SDL_GetGrabbedWindow.

Note: The returned window will be a new sdl2:window record pointing to the address of the existing window. It will be struct-eq? to other sdl2:window records for the same window, but not eq?.

Requires SDL 2.0.4 or higher, and sdl2 egg 0.2.0 or higher.

[setter] (window-icon-set! window icon-surface)

See SDL_SetWindowIcon.

[procedure] (window-id window) → integer

See SDL_GetWindowID.

[procedure] (window-maximum-size window) → [width height]
[setter] (set! (window-maximum-size window) size)
[setter] (window-maximum-size-set! window size)

See SDL_GetWindowMaximumSize and SDL_SetWindowMaximumSize.

window-maximum-size returns multiple values.

The setters accept a list of integers (width height).

[procedure] (window-minimum-size window) → [width height]
[setter] (set! (window-minimum-size window) size)
[setter] (window-minimum-size-set! window size)

See SDL_GetWindowMinimumSize and SDL_SetWindowMinimumSize.

window-minimum-size returns multiple values.

The setters accept a list of integers (width height).

[procedure] (window-opacity window) → float
[setter] (set! (window-opacity window) opacity)
[setter] (window-opacity-set! window opacity)

See SDL_GetWindowOpacity and SDL_SetWindowOpacity.

Requires SDL 2.0.5 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (window-pixel-format window) → symbol
[procedure] (window-pixel-format-raw window) → integer

Returns a symbol or integer indicating the given window's pixel format. See SDL_GetWindowPixelFormat.

[procedure] (window-position window) → [x y]
[setter] (set! (window-position window) pos)
[setter] (window-position-set! window pos)

See SDL_GetWindowPosition and SDL_SetWindowPosition.

window-position returns multiple values.

The setters accept a list of integers (x y).

[procedure] (window-resizable? window) → bool
[setter] (set! (window-resizable? window) bool)
[setter] (window-resizable-set! window bool)

See SDL_SetWindowResizable.

window-resizable? is available with any SDL version. window-resizable-set! and (set! (window-resizable? window) ...) require SDL 2.0.5 or higher.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (window-size window) → [width height]
[setter] (set! (window-size window) size)
[setter] (window-size-set! window size)

See SDL_GetWindowSize and SDL_SetWindowSize.

window-size returns multiple values.

The setters accept a list of integers (width height).

[procedure] (window-surface window) → sdl2:surface

See SDL_GetWindowSurface.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (window-title window) → string
[setter] (set! (window-title window) title)
[setter] (window-title-set! window title)

See SDL_GetWindowTitle and SDL_SetWindowTitle.

Miscellaneous

[procedure] (clear-error!)

See SDL_ClearError.

[procedure] (get-error) → string

See SDL_GetError.

[procedure] (set-error! message)

See SDL_SetError.

Unlike SDL_SetError, this procedure only accepts one argument, a string. You can use sprintf to do string substitution if desired.

[procedure] (get-platform) → string

See SDL_GetPlatform.

[procedure] (get-base-path) → string

See SDL_GetBasePath.

Requires SDL 2.0.1 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-pref-path org app) → string

See SDL_GetPrefPath.

Requires SDL 2.0.1 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (is-tablet?) → boolean

See SDL_IsTablet.

Requires SDL 2.0.9 or higher, and sdl2 egg 0.4.0 or higher.

[procedure] (get-power-info) → [secs pct]

See SDL_GetPowerInfo.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (screen-saver-enabled?) → boolean
[setter] (set! (screen-saver-enabled?) enabled?)
[setter] (screen-saver-enabled-set! enabled?)

See SDL_IsScreenSaverEnabled, SDL_EnableScreenSaver, and SDL_DisableScreenSaver.

[procedure] (has-clipboard-text?) → boolean

See SDL_HasClipboardText.

[procedure] (get-clipboard-text) → string

See SDL_GetClipboardText.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (set-clipboard-text! text)

See SDL_SetClipboardText.

Signals an exception of kind (exn sdl2) if an error occurs.

[procedure] (show-simple-message-box flag title message #!optional window)

See SDL_ShowSimpleMessageBox.

flag must be a message box flag symbol or equivalent integer constant.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires sdl2 egg 0.4.0 or higher.

[procedure] (open-url url)

See SDL_OpenURL.

Signals an exception of kind (exn sdl2) if an error occurs.

Requires SDL 2.0.14 or higher, and sdl2 egg 0.4.0 or higher.