## SRFI-128: Comparators

This SRFI provides comparators, which bundle a type test predicate, an equality predicate, an ordering predicate, and a hash function (the last two are optional) into a single Scheme object. By packaging these procedures together, they can be treated as a single item for use in the implementation of data structures.

## Installation

$ chicken-install srfi-128

or

$ chicken-install srfi-128 -test

if you want to run the tests for the egg in addition.

## SRFI Description

For a full description of this SRFI, see the full SRFI document. This documentation covers the API only.

## Comparators

### Predicates

*[procedure]*

`(comparator? obj)`

Returns `#t` if `obj` is a comparator, and `#f` otherwise.

*[procedure]*

`(comparator-ordered? comparator)`

Returns `#t` if `comparator` has a supplied ordering predicate, and `#f` otherwise.

*[procedure]*

`(comparator-hashable? comparator)`

Returns `#t` if `comparator` has a supplied hash function, and `#f` otherwise.

### Constructors

The following comparator constructors all supply appropriate type test predicates, equality predicates, ordering predicates, and hash functions based on the supplied arguments. They are allowed to cache their results: they need not return a newly allocated object, since comparators are pure and functional. In addition, the procedures in a comparator are likewise pure and functional.

*[procedure]*

`(make-comparator type-test equality ordering hash)`

Returns a comparator which bundles the `type-test`, `equality`, `ordering`, and `hash` procedures provided. However, if `ordering` or `hash` is `#f`, a procedure is provided that signals an error on application. The predicates `comparator-ordered?` and/or `comparator-hashable?`, respectively, will return `#f` in these cases.

Here are calls on make-comparator that will return useful comparators for standard Scheme types:

(make-comparator boolean? boolean=? (lambda(x y) (and (not x) y)) boolean-hash)

will return a comparator for booleans, expressing the ordering `#f` < `#t` and the standard hash function for booleans.

(make-comparator real? = < (lambda(x) (exact (abs x))))

will return a comparator expressing the natural ordering of real numbers and a plausible (but not optimal) hash function.

(make-comparator string? string=? string<? string-hash)

will return a comparator expressing the implementation's ordering of strings and the standard hash function.

(make-comparator string? string-ci=? string-ci<? string-ci-hash)

will return a comparator expressing the implementation's case-insensitive ordering of strings and the standard case-insensitive hash function.

*[procedure]*

`(make-pair-comparator car-comparator cdr-comparator)`

This procedure returns comparators whose functions behave as follows:

- The type test returns
`#t`if its argument is a pair, if the car satisfies the type test predicate of`car-comparator`, and the cdr satisfies the type test predicate of`cdr-comparator`. - The equality function returns
`#t`if the cars are equal according to`car-comparator`and the cdrs are equal according to`cdr-comparator`, and`#f`otherwise. - The ordering function first compares the cars of its pairs using the equality predicate of
`car-comparator`. If they are equal, then the ordering predicate of`car-comparator`is applied to the cars and its value is returned. Otherwise, the predicate compares the cdrs using the equality predicate of`cdr-comparator`. If they are not equal, then the ordering predicate of`cdr-comparator`is applied to the cdrs and its value is returned. - The hash function computes the hash values of the car and the cdr using the hash functions of
`car-comparator`and`cdr-comparator`respectively and then hashes them together in an implementation-defined way.

*[procedure]*

`(make-list-comparator element-comparator type-test empty? head tail)`

This procedure returns comparators whose functions behave as follows:

- The type test returns
`#t`if its argument satisfies`type-test`and the elements satisfy the type test predicate of element-comparator. - The total order defined by the equality and ordering functions is as follows (known as lexicographic order):
- The empty sequence, as determined by calling
`empty?`, compares equal to itself. - The empty sequence compares less than any non-empty sequence.
- Two non-empty sequences are compared by calling the
`head`procedure on each. If the heads are not equal when compared using`element-comparator`, the result is the result of that comparison. Otherwise, the results of calling the`tail`procedure are compared recursively.

- The empty sequence, as determined by calling
- The
`hash`function computes the hash values of the elements using the hash function of`element-comparator`and then hashes them together in an implementation-defined way.

*[procedure]*

`(make-vector-comparator element-comparator type-test length ref)`

This procedure returns comparators whose functions behave as follows:

- The type test returns
`#t`if its argument satisfies`type-test`and the elements satisfy the type test predicate of`element-comparator`. - The equality predicate returns
`#t`if both of the following tests are satisfied in order: the lengths of the vectors are the same in the sense of`=`, and the elements of the vectors are the same in the sense of the equality predicate of`element-comparator`. - The ordering predicate returns
`#t`if the results of applying length to the first vector is less than the result of applying length to the second vector. If the lengths are equal, then the elements are examined pairwise using the ordering predicate of`element-comparator`. If any pair of elements returns`#t`, then that is the result of the list comparator's ordering predicate; otherwise the result is`#f` - The
`hash`function computes the hash values of the elements using the hash function of`element-comparator`and then hashes them together in an implementation-defined way.

Here is an example, which returns a comparator for byte vectors:

(make-vector-comparator (make-comparator exact-integer? = < number-hash) bytevector? bytevector-length bytevector-u8-ref)

*[procedure]*

`(make-eq-comparator)`

*[procedure]*

`(make-eqv-comparator)`

*[procedure]*

`(make-equal-comparator)`

These procedures return comparators whose functions behave as follows:

- The type test returns
`#t`in all cases. - The equality functions are
`eq?`,`eqv?`, and`equal?`respectively. - The ordering function is implementation-defined, except that it must conform to the rules for ordering functions. It may signal an error instead.
- The hash function is
`default-hash`.

These comparators accept circular structure (in the case of equal-comparator, provided the implementation's `equal?` predicate does so) and NaNs.

### Standard hash functions

These are hash functions for some standard Scheme types, suitable for passing to `make-comparator`. Users may write their own hash functions with the same signature. However, if programmers wish their hash functions to be backward compatible with the reference implementation of SRFI 69, they are advised to write their hash functions to accept a second argument and ignore it.

*[procedure]*

`(boolean-hash obj)`

*[procedure]*

`(char-hash obj)`

*[procedure]*

`(char-ci-hash obj)`

*[procedure]*

`(string-hash obj)`

*[procedure]*

`(string-ci-hash obj)`

*[procedure]*

`(symbol-hash obj)`

*[procedure]*

`(number-hash obj)`

These are suitable hash functions for the specified types. The hash functions `char-ci-hash` and `string-ci-hash` treat their argument case-insensitively. Note that while `symbol-hash` may return the hashed value of applying `symbol->string` and then `string-hash` to the symbol, this is not a requirement.

### Bounds and salt

The following macros allow the callers of hash functions to affect their behavior without interfering with the calling signature of a hash function, which accepts a single argument (the object to be hashed) and returns its hash value. They are provided as macros so that they may be implemented in different ways: as a global variable, a SRFI 39 or R7RS parameter, or an ordinary procedure, whatever is most efficient in a particular implementation.

*[syntax]*

`(hash-bound)`

Hash functions should be written so as to return a number between 0 and the largest reasonable number of elements (such as hash buckets) a data structure in the implementation might have. What that value is depends on the implementation. This value provides the current bound as a positive exact integer, typically for use by user-written hash functions. However, they are not required to bound their results in this way.

*[syntax]*

`(hash-salt)`

A salt is random data in the form of a non-negative exact integer used as an additional input to a hash function in order to defend against dictionary attacks, or (when used in hash tables) against denial-of-service attacks that overcrowd certain hash buckets, increasing the amortized O(1) lookup time to O(n). Salt can also be used to specify which of a family of hash functions should be used for purposes such as cuckoo hashing. This macro provides the current value of the salt, typically for use by user-written hash functions. However, they are not required to make use of the current salt.

The initial value is implementation-dependent, but must be less than the value of (hash-bound), and should be distinct for distinct runs of a program unless otherwise specified by the implementation. Implementations may provide a means to specify the salt value to be used by a particular invocation of a hash function.

### Default comparators

*[procedure]*

`(make-default-comparator)`

Returns a comparator known as a default comparator that accepts Scheme values and orders them in some implementation-defined way, subject to the following conditions:

- Given disjoint types
`a`and`b`, one of three conditions must hold:- All objects of type
`a`compare less than all objects of type`b`. - All objects of type
`a`compare greater than all objects of type`b`. - All objects of both type
`a`and type`b`compare equal to each other. This is not permitted for any of the Scheme types mentioned below.

- All objects of type
- The empty list must be ordered before all pairs.
- When comparing booleans, it must use the total order
`#f`<`#t`. - When comparing characters, it must use
`char=?`and`char<?`.**Note:**In R5RS, this is an implementation-dependent order that is typically the same as Unicode codepoint order; in R6RS and R7RS, it is Unicode codepoint order. - When comparing pairs, it must behave the same as a comparator returned by
`make-pair-comparator`with default comparators as arguments. - When comparing symbols, it must use an implementation-dependent total order. One possibility is to use the order obtained by applying
`symbol->string`to the symbols and comparing them using the total order implied by`string<?`. - When comparing bytevectors, it must behave the same as a comparator created by the expression
`(make-vector-comparator (make-comparator < = number-hash) bytevector? bytevector-length bytevector-u8-ref)`. - When comparing numbers where either number is complex, since non-real numbers cannot be compared with
`<`, the following least-surprising ordering is defined: If the real parts are < or >, so are the numbers; otherwise, the numbers are ordered by their imaginary parts. This can still produce somewhat surprising results if one real part is exact and the other is inexact. - When comparing real numbers, it must use
`=`and`<`. - When comparing strings, it must use
`string=?`and`string<?`.**Note:**In R5RS, this is lexicographic order on the implementation-dependent order defined by char<?; in R6RS it is lexicographic order on Unicode codepoint order; in R7RS it is an implementation-defined order. - When comparing vectors, it must behave the same as a comparator returned by
`(make-vector-comparator (make-default-comparator) vector? vector-length vector-ref)`. - When comparing members of types registered with
`comparator-register-default!`, it must behave in the same way as the comparator registered using that function.

Default comparators use `default-hash` as their hash function.

*[procedure]*

`(default-hash obj)`

This is the hash function used by default comparators, which accepts a Scheme value and hashes it in some implementation-defined way, subject to the following conditions:

- When applied to a pair, it must return the result of hashing together the values returned by
`default-hash`when applied to the car and the cdr. - When applied to a boolean, character, string, symbol, or number, it must return the same result as
`boolean-hash`,`char-hash`,`string-hash`,`symbol-hash`, or`number-hash`respectively. - When applied to a list or vector, it must return the result of hashing together the values returned by
`default-hash`when applied to each of the elements.

*[procedure]*

`(comparator-register-default! comparator)`

Registers `comparator` for use by default comparators, such that if the objects being compared both satisfy the type test predicate of `comparator`, it will be employed by default comparators to compare them. Returns an unspecified value. It is an error if any value satisfies both the type test predicate of comparator and any of the following type test predicates: `boolean?`, `char?`, `null?`, `pair?`, `symbol?`, `bytevector?`, `number?`, `string?`, `vector?`, or the type test predicate of a comparator that has already been registered.

This procedure is intended only to extend default comparators into territory that would otherwise be undefined, not to override their existing behavior. In general, the ordering of calls to `comparator-register-default!` should be irrelevant. However, implementations that support inheritance of record types may wish to ensure that default comparators always check subtypes before supertypes.

### Accessors and invokers

*[procedure]*

`(comparator-type-test-predicate comparator)`

*[procedure]*

`(comparator-equality-predicate comparator)`

*[procedure]*

`(comparator-ordering-predicate comparator)`

*[procedure]*

`(comparator-hash-function comparator)`

Return the four procedures of `comparator`.

*[procedure]*

`(comparator-test-type comparator obj)`

Invokes the type test predicate of `comparator` on `obj` and returns what it returns. More convenient than comparator-type-test-predicate, but less efficient when the predicate is called repeatedly.

*[procedure]*

`(comparator-check-type comparator obj)`

Invokes the type test predicate of `comparator` on `obj` and returns true if it returns true, but signals an error otherwise. More convenient than `comparator-type-test-predicate`, but less efficient when the predicate is called repeatedly.

*[procedure]*

`(comparator-hash comparator obj)`

Invokes the hash function of `comparator` on `obj` and returns what it returns. More convenient than `comparator-hash-function`, but less efficient when the function is called repeatedly.

**Note:** No invokers are required for the equality and ordering predicates, because `=?` and `<?` serve this function.

### Comparison predicates

*[procedure]*

`(=? comparator object1 object2 object3 ...)`

*[procedure]*

`(<? comparator object1 object2 object3 ...)`

*[procedure]*

`(>? comparator object1 object2 object3 ...)`

*[procedure]*

`(<=? comparator object1 object2 object3 ...)`

*[procedure]*

`(>=? comparator object1 object2 object3 ...)`

These procedures are analogous to the number, character, and string comparison predicates of Scheme. They allow the convenient use of comparators to handle variable data types.

These procedures apply the equality and ordering predicates of comparator to the objects as follows. If the specified relation returns `#t` for all objecti and objectj where n is the number of objects and 1 <= i < j <= n, then the procedures return `#t`, but otherwise #f. Because the relations are transitive, it suffices to compare each object with its successor. The order in which the values are compared is unspecified.

### Syntax

*[syntax]*

`(comparator-if<=> [ <comparator> ] <object1> <object2> <less-than> <equal-to> <greater-than>)`

It is an error unless `<comparator>` evaluates to a comparator and `<object1>` and `<object2>` evaluate to objects that the comparator can handle. If the ordering predicate returns true when applied to the values of `<object1>` and `<object2>` in that order, then <less-than> is evaluated and its value returned. If the equality predicate returns true when applied in the same way, then `<equal-to>` is evaluated and its value returned. If neither returns true, `<greater-than>` is evaluated and its value returned.

If `<comparator>` is omitted, a default comparator is used.

## Repository

## Version History

- 0.9
- Full CHICKEN-5 support
- 0.8
- CHICKEN-5 support (no tests)
- 0.7
- Includes bug fix for
`make-list-comparator`from Marc Nieper-Wisskirchen - 0.6
- Removed hardcoded .so in setup file
- 0.5
- Standard README.org added to all SRFIs
- 0.4
- Update to fix SRFI-128 mustard
- 0.3
- Packages egg without extraneous files
- 0.2
- Fixes bugs in setup
- 0.1
- Initial release

## License

Copyright (C) John Cowan (2016). All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.