You are looking at historical revision 30454 of this page. It may differ significantly from its current revision.
Mini-tutorial on explicit (and implicit) renaming macros in Chicken
The following is an attempt to explain, how to write hygienic macros in Chicken with explicit renaming. It supposes, that the reader knows, how to write other low-level macros like define-macro in Chicken-3 and other Schemes, or defmacro in Lisp. As you will see, explicit renaming macros are even easier to write than those with define-macro. This is because there is a brute force method to avoid variable capture.
Let's consider a trivial macro a la Chicken-3 without any considerations on hygiene and variable capture:
(define-macro (swap! x y) ; wrong `(let ((tmp ,x)) (set! ,x ,y) (set! ,y tmp)))
You might be surprised, but the replacement text, that within the backquotes, need not be changed in an explicit renaming macro, at least in a first step. What has to be changed, is the signature: explicit renaming transformers are always procedures of three variables, usually called form, rename, compare?, which has to be wrapped into an er-macro-transformer call:
(define-syntax swap! (er-macro-transformer (lambda (form rename compare?) ... `(let ((tmp ,x)) (set! ,x ,y) (set! ,y tmp)))))
and you have to destructure the form argument, which is the whole macro-from, (swap! x y) in the example, to fill in the ellipsis above. That is
(define-syntax swap! ; wrong (er-macro-transformer (lambda (form rename compare?) (let ((x (cadr form)) (y (caddr form))) `(let ((tmp ,x)) (set! ,x ,y) (set! ,y tmp))))))
In this form, the new macro is the same as our first attempt with define-macro. We haven't bothered about variable capture or hygiene at all. But this macro already works. You can test it, say with
(let ((x 'x) (y 'y)) (swap! x y) (list x y))
and see if it does what it is supposed to do. Of course, it is not correct, since if a client uses tmp as one of his or her arguments, the macro will crash.
In the classical macro systems, defmacro in Common Lisp or define-macro in some Schemes, you now have to think carefully, which macro variables are in danger of variable capture and use an uninterned symbol for them, tmp in the current example. Worse than that, contrary to Common Lisp, Scheme allows to use any name for variables, even keyword names as let, set!, ... so that define-macro can never create a hygienic swap! macro. Here is, where renaming comes into the play. You don't need gensym, use rename instead. And you needn't bother, which symbol to rename, rename all.
What does that mean, "all"? It's easy in the present example, everything within the backquote, except those symbols, which are already unquoted. But in more complicated examples, you should use expand, to see the replacement text of your macro calls.
(pp (expand '(swap! x y)))
will result in the replacement text
(let ((tmp x)) (set! x y) (set! y tmp))
Only x and y are arguments of your swap! call, hence everything else in the replacement text should be renamed: namely let, tmp and set!. So a hygienic version of swap! would be
(define-syntax swap! (er-macro-transformer (lambda (form rename compare?) (let ((x (cadr form)) (y (caddr form))) `(,(rename 'let) ((,(rename 'tmp) ,x)) (,(rename 'set!) ,x ,y) (,(rename 'set!) ,y ,(rename 'tmp)))))))
If you repeat the expand call above, you will get the same replacement text, but with numbers suffixed to the renamed symbols, something like
(let11 ((tmp12 x)) (set!13 x y) (set!13 y tmp12))
These renamed symbols have the same meaning as the original names without suffixes, but serve as aliases which the client cannot use under any circumstances.
Note, that the two appearances of tmp and set! are renamed to the same alias, the rename operator is referentially transparent. Note also, that these renamed symbols are much easier to interpret than gensym'ed ones!
I personally do not like these rename calls within the backquoted expression, because you loose the visual similarity between the backquoted expression and the resulting replacement text. Therefore I prefer this version, which is equivalent
(define-syntax swap! (er-macro-transformer (lambda (form rename compare?) (let ( (x (cadr form)) (y (caddr form)) (%tmp (rename 'tmp)) (%let (rename 'let)) (%set! (rename 'set!)) ) `(,%let ((,%tmp ,x)) (,%set! ,x ,y) (,%set! ,y ,%tmp))))))
You can think of the two characters ,% in the template as an identity operator.
We havn't used the compare? argument in the transformer in this example. What's its role?
Well, some macros use special symbols verbatim as additional keywords, else and => in cond for example. With compare? it's possible to check, if these symbols, which might appear verbatim in a list, have the same meaning as their renamed variants (rename 'else), (rename '=>). For example, if else appears as the car of a list, lst say, you can code something like
(if (compare? (car lst) (rename 'else)) ...)
You see, explicit renaming macros are a bit more verbose than classical ones with define-macro. But everybody who is able to write the latter, is able to write the former as well. It's even easier!
Implicit renaming macros
But it can still be improved. Above, I said "You needn't bother which symbol to rename, rename all". Well, "all" is something which can perfectly be done by a machine. Consequently, since the advent of Chicken version 4.7, there is another low level macro system, based on ir-macro-transformer, which does this "rename all" in the background.
In explicit renaming macros, I had to tell the compiler explicitly, what to rename. Every symbol not renamed would break hygiene. In implicit renaming macros, the roles are reversed: I have to tell the compiler explicitly, which symbol should break hygiene, everything else is renamed, whence hygienic. A hygienic swap! macro now looks like this
(define-syntax swap! (ir-macro-transformer (lambda (form inject compare?) (let ((x (cadr form)) (y (caddr form))) `(let ((tmp ,x)) (set! ,x ,y) (set! ,y tmp))))))
Note, that the second argument to the transformer is now called inject. It's used to "inject" a symbol unrenamed into the replacement text. Note further, that there is no need to gensym tmp as in define-macro. And last but not least, it's obligatory to wrap the transformer into an ir-macro-transformer call: the compiler must know, which low-level system to compile, after all.
For implicit renaming macros, the third argument to the transformer is now used a bit differently, for example
(if (compare? 'else (car lst)) ...)
How to automate matters
Up to now, we have always destructured the macro-code, (swap! x y), by hand. define-macro did it automatically. Is there a way to do it automatically with explicit- and implicit-renaming-macros as well?
Yes, there is. You can use the bind macro from the bindings module. It's a version of destructuring-bind of Common Lisp. Using it you can replace the let above
(let ((x (cadr form)) (y (caddr form))) ...)
(bind (x y) (cdr form) ...)
That isn't that helpful for such a simple form, but what if form is deeply nested? Then your code would be much more readable with bind, than with deeply nested lets.
But we still aren't satisfied. Ok, destructuring can be simplyfied with bind, but what about renaming/injecting and additional keywords?
Well, the bindings module will help with solving these problems as well. For example, we've provided a version of define-macro, which cares for all three arguments of the macro-transformer. Without injecting and additional keywords its syntax is identical to that of our old friend from Chicken-3
(define-macro (swap! x y) `(let ((tmp ,x)) (set! ,x ,y) (set! ,y tmp)))
But this is now hygienic!
With additional clauses, (inject ...) and (keywords ...) define-macro cares for injecting and keywords as well.
Here is an explicit-renaming implementation of a verbose version of if with define-er-macro
(define-er-macro (vif test (then . xprs) (else . yprs)) (rename-prefix %) (keywords then else) `(,%if ,test (,%begin ,@xprs) (,%begin ,@yprs)))
In case you prefer a macro more similar to syntax-rules, use macro-rules, which uses traditional quasiquoted templates and allows for injected symbols before the keyword-list.
(define-syntax vif (macro-rules (then else) ((_ test (then xpr . xprs)) `(if ,test (begin ,xpr ,@xprs))) ((_ test (else xpr . xprs)) `(if ,(not test) (begin ,xpr ,@xprs))) ((_ test (then xpr . xprs) (else ypr . yprs)) `(if ,test (begin ,xpr ,@xprs) (begin ,ypr ,@yprs)))))
For details see
Low level macros are really great ...
Jun 09, 2009
Jan 31, 2014