You are looking at historical revision 16521 of this page. It may differ significantly from its current revision.
This unit has support for evaluation and macro-handling. This unit is used by default, unless the program is compiled with the -explicit-use option.
load[procedure] (load FILE [EVALPROC])
Loads and evaluates expressions from the given source file, which may be either a string or an input port. Each expression read is passed to EVALPROC (which defaults to eval). On platforms that support it (currently native Windows, Linux ELF and Solaris), load can be used to load compiled programs:
% cat x.scm (define (hello) (print "Hello!")) % csc -s x.scm % csi -q #;1> (load "x.so") ; loading x.so ... #;2> (hello) Hello! #;3>
The second argument to load is ignored when loading compiled code. If source code is loaded from a port, then that port is closed after all expressions have been read.
Compiled code can be re-loaded, but care has to be taken, if code from the replaced dynamically loaded module is still executing (i.e. if an active continuation refers to compiled code in the old module).
Support for reloading compiled code dynamically is still experimental.
load-relative[procedure] (load-relative FILE [EVALPROC])
Similar to load, but loads FILE relative to the path of the currently loaded file.
load-noisily[procedure] (load-noisily FILE #!key EVALUATOR TIME PRINTER)
As load but the result(s) of each evaluated toplevel-expression is written to standard output. If EVALUATOR is given and not #f, then each expression is evaluated by calling this argument with the read expression as argument. If TIME is given and not false, then the execution time of each expression is shown (as with the time macro). If PRINTER is given and not false, then each expression is printed before evaluation by applying the expression to the value of this argument, which should be a one-argument procedure.
See also the load-verbose parameter.
load-library[procedure] (load-library UNIT [LIBRARYFILE])
On platforms that support dynamic loading, load-library loads the compiled library unit UNIT (which should be a symbol). If the string LIBRARYFILE is given, then the given shared library will be loaded and the toplevel code of the contained unit will be executed. If no LIBRARYFILE argument is given, then the following libraries are checked for the required unit:
- a file named <UNIT>.so
- the files given in the parameter dynamic-load-libraries
If the unit is not found, an error is signaled. When the library unit can be successfully loaded, a feature-identifier named UNIT is registered. If the feature is already registered before loading, the load-library does nothing.
set-dynamic-load-mode![procedure] (set-dynamic-load-mode! MODELIST)
On systems that support dynamic loading of compiled code via the dlopen(3) interface (for example Linux and Solaris), some options can be specified to fine-tune the behaviour of the dynamic linker. MODE should be a list of symbols (or a single symbol) taken from the following set:
- If local is given, then any C/C++ symbols defined in the dynamically loaded file are not available for subsequently loaded files and libraries. Use this if you have linked foreign code into your dynamically loadable file and if you don't want to export them (for example because you want to load another file that defines the same symbols).
- The default is global, which means all C/C++ symbols are available to code loaded at a later stage.
- If now is specified, all symbols are resolved immediately.
- Unresolved symbols are resolved as code from the file is executed. This is the default.
Note that this procedure does not control the way Scheme variables are handled - this facility is mainly of interest when accessing foreign code.
Start a new read-eval-print loop. Sets the reset-handler so that any invocation of reset restarts the read-eval-print loop. Also changes the current exception-handler to display a message, write any arguments to the value of (current-error-port) and reset.
Loading extension libraries
This functionality is only available on platforms that support dynamic loading of compiled code. Currently Linux, BSD, Solaris, Windows (with Cygwin) and HP/UX are supported.
- [parameter] repository-path
Contains a string naming the path to the extension repository, which defaults to either the value of the environment variable CHICKEN_REPOSITORY or the default library path (usually /usr/local/lib/chicken on UNIX systems).
extension-information[procedure] (extension-information ID)
If an extension with the name ID is installed and if it has a setup-information list registered in the extension repository, then the info-list is returned. Otherwise extension-information returns #f.
provide[procedure] (provide ID ...)
Registers the extension IDs ID ... as loaded. This is mainly intended to provide aliases for certain extension identifiers.
provided?[procedure] (provided? ID ...)
Returns #t if the extension with the IDs ID ... are currently loaded, or #f otherwise.
require[procedure] (require ID ...)
If the extension library ID is not already loaded into the system, then require will lookup the location of the shared extension library and load it. If ID names a library-unit of the base system, then it is loaded via load-library. If no extension library is available for the given ID, then an attempt is made to load the file ID.so or ID.scm (in that order) from one of the following locations:
- the current include path, which defaults to the pathnames given in CHICKEN_INCLUDE_PATH.
- the current directory
ID should be a string or a symbol.
set-extension-specifier![procedure] (set-extension-specifier! SYMBOL PROC)
Registers the handler-procedure PROC as a extension-specifier with the name SYMBOL. This facility allows extending the set of valid extension specifiers to be used with require-extension. When register-extension is called with an extension specifier of the form (SPEC ...) and SPEC has been registered with set-extension-specifier!, then PROC will be called with two arguments: the specifier and the previously installed handler (or #f if no such handler was defined). The handler should return a new specifier that will be processed recursively. If the handler returns a vector, then each element of the vector will be processed recursively. Alternatively the handler may return a string which specifies a file to be loaded:
(eval-when (compile eval) (set-extension-specifier! 'my-package (lambda (spec old) (make-pathname my-package-directory (->string (cadr spec))) ) ) ) (require-extension (my-package stuff)) ; --> expands into '(load "my-package-dir/stuff")
Note that the handler has to be registered at compile time, if it is to be visible in compiled code.
Returns a string given the installation directory (usually /usr/local/share/chicken on UNIX-like systems). As a last option, if the environment variable CHICKEN_PREFIX is set, then chicken-home will return $CHICKEN_PREFIX/share.
eval[procedure] (eval EXP [ENVIRONMENT])
Evaluates EXP and returns the result of the evaluation. The second argument is optional and defaults to the value of (interaction-environment).
Previous: Unit library
Next: Unit expand