You are looking at historical revision 21407 of this page. It may differ significantly from its current revision.

## Statistics

This library is a port of Larry Hunter's Lisp statistics library to chicken scheme.

The library provides a number of formulae and methods taken from the book "Fundamentals of Biostatistics" by Bernard Rosner (5th edition).

#### Statistical Distributions

To use this library, you need to understand the underlying statistics. In brief:

The Binomial distribution is used when counting discrete events in a series of trials, each of which events has a probability p of producing a positive outcome. An example would be tossing a coin `n` times: the probability of a head is `p`, and the distribution gives the expected number of heads in the `n` trials. The binomial distribution is defined as B(n, p).

The Poisson distribution is used to count discrete events which occur with a known average rate. A typical example is the decay of radioactive elements. A poisson distribution is defined Pois(mu).

The Normal distribution is used for real-valued events which cluster around a specific mean with a symmetric variance. A typical example would be the distribution of people's heights. A normal distribution is defined N(mean, variance).

### Provided Functions

#### Utilities

*[procedure]*

`(average-rank value sorted-values)`

returns the average position of given value in the list of sorted values: the rank is based from 1.

> (average-rank 2 '(1 2 2 3 4)) 5/2

*[procedure]*

`(beta-incomplete x a b)`

*[procedure]*

`(bin-and-count items n)`

Divides the range of the list of `items` into `n` bins, and returns a vector of the number of items which fall into each bin.

> (bin-and-count '(1 1 2 3 3 4 5) 5) #(2 1 2 1 1)

*[procedure]*

`(combinations n k)`

returns the number of ways to select `k` items from `n`, where the order does not matter.

*[procedure]*

`(factorial n)`

returns the factorial of `n`.

*[procedure]*

`(find-critical-value p-function p-value #:increasing?)`

given a monotonic function `p-function` taking a single value `x` to `y`, returns the value of `x` which makes `(p-function x)` closest to `p-value`. A boolean keyword parameter `#:increasing?` determines if function should be increasing or decreasing (the default).

*[procedure]*

`(fisher-z-transform r)`

returns the transformation of a correlation coefficient `r` into an approximately normal distribution.

*[procedure]*

`(gamma-incomplete a x)`

*[procedure]*

`(gamma-ln x)`

*[procedure]*

`(permutations n k)`

returns the number of ways to select `k` items from `n`, where the order does matter.

*[procedure]*

`(random-normal mean sd)`

returns a random number distributed with specified mean and standard deviation.

*[procedure]*

`(random-pick items)`

returns a random item from the given list of items.

*[procedure]*

`(random-sample n items)`

returns a random sample from the list of items without replacement of size `n`.

*[procedure]*

`(sign n)`

returns 0, 1 or -1 according to if `n` is zero, positive or negative.

*[procedure]*

`(square n)`

#### Descriptive statistics

These functions provide information on a given list of numbers, the `items`. Note, the list does not have to be sorted.

*[procedure]*

`(mean items)`

returns the arithmetic mean of the `items` (the sum of the numbers divided by the number of numbers).

(mean '(1 2 3 4 5)) => 3

*[procedure]*

`(median items)`

returns the value which separates the upper and lower halves of the list of numbers.

(median '(1 2 3 4)) => 5/2

*[procedure]*

`(mode items)`

returns two **values**. The first is a list of the *modes* and the second is the frequency. (A mode of a list of numbers is the most frequently occurring value.)

> (mode '(1 2 3 4)) (1 2 3 4) 1 > (mode '(1 2 2 3 4)) (2) 2 > (mode '(1 2 2 3 3 4)) (2 3) 2

*[procedure]*

`(geometric-mean items)`

returns the geometric mean of the `items` (the result of multiplying the items together and then taking the nth root, where n is the number of items).

(geometric-mean '(1 2 3 4 5)) => 2.60517108469735

*[procedure]*

`(range items)`

returns the difference between the biggest and the smallest value from the list of `items`.

(range '(5 1 2 3 4)) => 4

*[procedure]*

`(percentile items percent)`

returns the item closest to the `percent` value if the `items` are sorted into order; the returned item may be in the list, or the average of adjacent values.

(percentile '(1 2 3 4) 50) => 5/2 (percentile '(1 2 3 4) 67) => 3

*[procedure]*

`(variance items)`

*[procedure]*

`(standard-deviation items)`

*[procedure]*

`(coefficient-of-variation items)`

returns 100 * (std-dev / mean) of the `items`.

(coefficient-of-variation '(1 2 3 4)) => 51.6397779494322

*[procedure]*

`(standard-error-of-the-mean items)`

returns std-dev / sqrt(length items).

(standard-error-of-the-mean '(1 2 3 4)) => 0.645497224367903

*[procedure]*

`(mean-sd-n items)`

returns three **values**, one for the mean, one for the standard deviation, and one for the length of the list.

> (mean-sd-n '(1 2 3 4)) 5/2 1.29099444873581 4

#### Distributional functions

*[procedure]*

`(binomial-probability n k p)`

returns the probability that the number of positive outcomes for a binomial distribution B(n, p) is k.

> (do-ec (: i 0 11) (format #t "i = ~d P = ~f~&" i (binomial-probability 10 i 0.5))) i = 0 P = 0.0009765625 i = 1 P = 0.009765625 i = 2 P = 0.0439453125 i = 3 P = 0.1171875 i = 4 P = 0.205078125 i = 5 P = 0.24609375 i = 6 P = 0.205078125 i = 7 P = 0.1171875 i = 8 P = 0.0439453125 i = 9 P = 0.009765625 i = 10 P = 0.0009765625

*[procedure]*

`(binomial-cumulative-probability n k p)`

returns the probability that less than `k` positive outcomes occur for a binomial distribution B(n, p).

> (do-ec (: i 0 11) (format #t "i = ~d P = ~f~&" i (binomial-cumulative-probability 10 i 0.5))) i = 0 P = 0.0 i = 1 P = 0.0009765625 i = 2 P = 0.0107421875 i = 3 P = 0.0546875 i = 4 P = 0.171875 i = 5 P = 0.376953125 i = 6 P = 0.623046875 i = 7 P = 0.828125 i = 8 P = 0.9453125 i = 9 P = 0.9892578125 i = 10 P = 0.9990234375

*[procedure]*

`(binomial-ge-probability n k p)`

returns the probability of `k` or more positive outcomes for a binomial distribution B(n, p).

*[procedure]*

`(binomial-le-probability n k p)`

returns the probability `k` or fewer positive outcomes for a binomial distribution B(n, p).

*[procedure]*

`(poisson-probability mu k)`

returns the probability of `k` events occurring when the average is `mu`.

> (do-ec (: i 0 20) (format #t "P(X=~2d) = ~,4f~&" i (poisson-probability 10 i))) P(X= 0) = 0.0000 P(X= 1) = 0.0005 P(X= 2) = 0.0023 P(X= 3) = 0.0076 P(X= 4) = 0.0189 P(X= 5) = 0.0378 P(X= 6) = 0.0631 P(X= 7) = 0.0901 P(X= 8) = 0.1126 P(X= 9) = 0.1251 P(X=10) = 0.1251 P(X=11) = 0.1137 P(X=12) = 0.0948 P(X=13) = 0.0729 P(X=14) = 0.0521 P(X=15) = 0.0347 P(X=16) = 0.0217 P(X=17) = 0.0128 P(X=18) = 0.0071 P(X=19) = 0.0037

*[procedure]*

`(poisson-cumulative-probability mu k)`

returns the probability of less than `k` events occurring when the average is `mu`.

> (do-ec (: i 0 20) (format #t "P(X=~2d) = ~,4f~&" i (poisson-cumulative-probability 10 i))) P(X= 0) = 0.0000 P(X= 1) = 0.0000 P(X= 2) = 0.0005 P(X= 3) = 0.0028 P(X= 4) = 0.0103 P(X= 5) = 0.0293 P(X= 6) = 0.0671 P(X= 7) = 0.1301 P(X= 8) = 0.2202 P(X= 9) = 0.3328 P(X=10) = 0.4579 P(X=11) = 0.5830 P(X=12) = 0.6968 P(X=13) = 0.7916 P(X=14) = 0.8645 P(X=15) = 0.9165 P(X=16) = 0.9513 P(X=17) = 0.9730 P(X=18) = 0.9857 P(X=19) = 0.9928

*[procedure]*

`(poisson-ge-probability mu k)`

returns the probability of `k` or more events occurring when the average is `mu`.

*[procedure]*

`(normal-pdf x mean variance)`

returns the likelihood of `x` given a normal distribution with stated mean and variance.

> (do-ec (: i 0 11) (format #t "~3d ~,4f~&" i (normal-pdf i 5 4))) 0 0.0088 1 0.0270 2 0.0648 3 0.1210 4 0.1760 5 0.1995 6 0.1760 7 0.1210 8 0.0648 9 0.0270 10 0.0088

*[procedure]*

`(convert-to-standard-normal x mean variance)`

returns a value for `x` rescaling the given normal distribution to a standard N(0, 1).

> (convert-to-standard-normal 5 6 2) -1/2

*[procedure]*

`(phi x)`

returns the cumulative distribution function (CDF) of the standard normal distribution.

> (do-ec (: x -2 2 0.4) (format #t "~4,1f ~,4f~&" x (phi x))) -2.0 0.0228 -1.6 0.0548 -1.2 0.1151 -0.8 0.2119 -0.4 0.3446 0.0 0.5000 0.4 0.6554 0.8 0.7881 1.2 0.8849 1.6 0.9452

*[procedure]*

`(z percentile)`

returns the inverse of the standard normal distribution. Input is a percentile, between 0.0 and 1.0.

*[procedure]*

`( t-distribution degrees-of-freedom percentile)`

returns the point in the t-distribution given the `degrees-of-freedom` and `percentile`. `degrees-of-freedom` must be a positive integer, and `percentile` a value between 0.0 and 1.0.

*[procedure]*

`(chi-square degrees-of-freedom percentile)`

returns the point at which chi-square distribution has `percentile` to its **left**, using given `degrees-of-freedom`.

*[procedure]*

`(chi-square-cdf x degrees-of-freedom)`

returns the probability that a random variable is to the **left** of `x` using the chi-square distribution with given `degrees-of-freedom`.

#### Confidence intervals

These functions report bounds for an observed property of a distribution: the bounds are tighter as the confidence level, alpha, varies from 0.0 to 1.0.

*[procedure]*

`(binomial-probability-ci n p alpha)`

returns two values, the upper and lower bounds on an observed probability `p` from `n` trials with confidence `(1-alpha)`.

> (binomial-probability-ci 10 0.8 0.9) 0.724273681640625 0.851547241210938 ; 2 values

*[procedure]*

`(poisson-mu-ci k alpha)`

returns two values, the upper and lower bounds on the poisson parameter if `k` events are observed; the bound is for confidence `(1-alpha)`.

> (poisson-mu-ci 10 0.9) 8.305419921875 10.0635986328125 ; 2 values

*[procedure]*

`(normal-mean-ci mean standard-deviation k alpha)`

returns two values, the upper and lower bounds on the mean of the normal distibution of `k` events are observed; the bound is for confidence `(1-alpha)`.

> (normal-mean-ci 0.5 0.1 10 0.8) 0.491747852700165 0.508252147299835 ; 2 values

*[procedure]*

`(normal-mean-ci-on-sequence items alpha)`

returns two values, the upper and lower bounds on the mean of the given `items`, assuming they are normally distributed; the bound is for confidence `(1-alpha)`.

> (normal-mean-ci-on-sequence '(1 2 3 4 5) 0.9) 2.40860081649174 3.59139918350826 ; 2 values

*[procedure]*

`(normal-variance-ci standard-deviation k alpha)`

returns two values, the upper and lower bounds on the variance of the normal distibution of `k` events are observed; the bound is for confidence `(1-alpha)`.

*[procedure]*

`(normal-variance-ci-on-sequence items alpha)`

returns two values, the upper and lower bounds on the variance of the given `items`, assuming they are normally distributed; the bound is for confidence `(1-alpha)`.

*[procedure]*

`normal-sd-ci standard-deviation k alpha)`

returns two values, the upper and lower bounds on the standard deviation of the normal distibution of `k` events are observed; the bound is for confidence `(1-alpha)`.

*[procedure]*

`(normal-sd-ci-on-sequence sequence items)`

returns two values, the upper and lower bounds on the standard deviation of the given `items`, assuming they are normally distributed; the bound is for confidence `(1-alpha)`.

#### Hypothesis testing

These functions report on the significance of an observed sample against a given distribution.

##### (parametric)

*[procedure]*

`(z-test x-bar n #:mu #:sigma #:tails)`

Given `x-bar` the sample mean, `n` the number in the sample, `#:mu` the distribution mean (defaults to 0), `#:sigma` the distribution standard deviation (defaults to 1), and `#:tails` the significance to report on:

`':both`, the probability of the difference between`x-bar`and`#:mu``':positive`, the probability that observation is`>= x-bar``':negative`, the probability that observation is`<= x-bar`

e.g. given a distribution with mean 50 and standard deviation 10

; probability that a single observation is <= 40 > (z-test 40 1 #:mu 50 #:sigma 10 #:tails ':negative) 0.158655 ; probability that 10 observations are <= 40 > (z-test 40 10 #:mu 50 #:sigma 10 #:tails ':negative) 0.000783 ; probability that 5 observations give a mean of 40 > (z-test 40 5 #:mu 50 #:sigma 10) 0.025347

*[procedure]*

`(z-test-on-sequence observations #:mu #:sigma #:tails)`

As for `z-test` except `x-bar` and `n` are computed from given `observations`.

*[procedure]*

`(t-test-one-sample x-bar sd n mu #:tails)`

Given observed data with mean `x-bar`, standard devation `sd` and number of observations `n` (`n < 30`), return the significance of the sample compared with the population mean `mu`. `#:tails` is one of:

`':both`two-sided (default)`':positive`one-sided,`x-bar >= mu``':negative`one-sided,`x-bar <= mu`

*[procedure]*

`(t-test-one-sample-on-sequence observations mu #:tails)`

As for `t-test-one-sample` except `x-bar`, `sd` and `n` are computed from given `observations`.

*[procedure]*

`(t-test-paired t-bar sd n #:tails)`

Computes the significance of the differences between two sequences of data: the differences are given as their mean, `t-bar`, standard deviation, `sd`, and number of measurements, `n`.

*[procedure]*

`(t-test-paired-on-sequences before after #:tails)`

Computes the significance of the difference between two sequences of data: one before an experimental change and one after. `#:tails` is as for `t-significance`.

> (t-test-paired-on-sequences '(4 3 5) '(1 1 3)) 0.0198039411803931

*[procedure]*

`(t-test-two-sample mean-1 sd-1 n-1 mean-2 sd-2 n-2 #:variances-equal? #:variance-significance-cutoff #:tails)`

Computes the significance of the difference of two means given the sample standard deviations and sizes.

*[procedure]*

`(t-test-two-sample-on-sequences sequence-1 sequence-2 #:tails)`

Significance of difference of two sequences of observations.

*[procedure]*

`(f-test variance-1 n1 variance-2 n2 #:tails)`

Tests for the equality of two variances.

*[procedure]*

`(chi-square-test-one-sample observed-variance sample-size test-variance #:tails)`

Tests for significance of difference between an observed and a test variance.

- binomial-test-one-sample
- binomial-test-two-sample
- fisher-exact-test
- mcnemars-test
- poisson-test-one-sample

##### (non parametric)

*[procedure]*

`(sign-test plus-count minus-count #:exact? #:tails)`

*[procedure]*

`(sign-test-on-sequence sequence-1 sequence-2 #:exact? #:tails)`

Takes two equal-sized sequences of observations, and reports if the entries of one are different to those in the other.

*[procedure]*

`(wilcoxon-signed-rank-test differences #:tails)`

Given at least 16 differences, reports if the positive differences are significantly larger or smaller than the negative differences.

<procedure>(wilcoxon-signed-rank-test-on-sequences sequence-1 sequence-2 #:tails)<procedure> Given two sequences of at least 16 observations, computes `wilcoxon-signed-rank-test` on the differences.

*[procedure]*

`(chi-square-test-rxc contingency-table)`

NOT WORKING

*[procedure]*

`(chi-square-test-for-trend )`

NOT WORKING

#### Sample size estimates

*[procedure]*

`(t-test-one-sample-sse mean-1 mean-2 sigma-1 #:alpha #:1-beta #:tails)`

Returns the size of sample necessary to distinguish a normally distributed sample with `mean-2` from a population `mean-1` standard deviation `sigma-1`. The significance `#:alpha` (defaults to 0.05), power `#:1-beta` (0.95) and sides `#:tails` (':both) may be altered.

> (t-test-one-sample-sse 5.0 5.2 0.5) 163

*[procedure]*

`(t-test-two-sample-sse mean-1 sigma-1 mean-2 sigma-2 #:alpha #:1-beta #:tails #:sample-ratio)`

Returns the size of sample necessary to distinguish a normally distributed sample N(mean-1, sigma-1) from a normally distributed sample N(mean-2, sigma-2). The significance `#:alpha` (defaults to 0.05), power `#:1-beta` (0.95), sides `#:tails` (':both) and sample-ratio `#:sample-ratio` (1) may be altered.

*[procedure]*

`(t-test-paired-sse difference-mean difference-sigma #:alpha #:1-beta #:tails)`

Returns the size of sample to produce a given mean and standard deviation in the differences of two samples.

*[procedure]*

`(binomial-test-one-sample-sse p-estimated p-null #:alpha #:1-beta #:tails)`

Returns the size of sample needed to test whether an observed probability is significantly different from a particular binomial null hypothesis with a significance alpha and a power 1-beta.

*[procedure]*

`(binomial-test-two-sample-sse p-one p-two #:alpha #:1-beta #:tails #:sample-ratio)`

Returns the size of sample needed to test if given two binomial probabilities are significantly different. `#:sample-ratio` can be given if the two samples differ in size.

*[procedure]*

`(binomial-test-paired-sse pd pa #:alpha #:1-beta #:tails)`

Sample size estimate for McNemar's discordant pairs test.

*[procedure]*

`(correlation-sse rho #:alpha #:1-beta)`

Returns the size of sample necessary to find a correlation of value `rho` with significance `#:alpha` (defaults to 0.05) and power `#:1-beta` (defaults to 0.95).

> (correlation-sse 0.80 #:alpha 0.05 #:1-beta 0.9) 11

#### Correlation and regression

*[procedure]*

`(linear-regression line-defn)`

Given a line definition as a list of point pairs, first prints to the terminal and then returns 5 **values** for the best fitting line through the points:

- the y-intercept
- the slope
- the correlation coefficient, r
- the square of the correlation coefficient, r^2
- the significance of the difference of the slope from zero, p

(This is also called the Pearson correlation; used when relation expected to be linear. Also see `spearman-rank-correlation`.)

> (linear-regression '((1.0 0.1) (2.0 0.3) (3.0 0.8))) Intercept = -0.3, slope = 0.35, r = 0.970725343394151, R^2 = 0.942307692307692, p = 0.154420958311267 -0.3 0.35 0.970725343394151 0.942307692307692 0.154420958311267 ; 5 values

*[procedure]*

`(correlation-coefficient line-defn)`

As above, but only returns the value of *r*:

> (correlation-coefficient '((1.0 0.1) (2.0 0.3) (3.0 0.8))) 0.970725343394151

*[procedure]*

`(correlation-test-two-sample r1 n1 r2 n2 #:tails)`

Returns the significance of the similarity between two correlations. `#:tails` determines how the comparison is made: `':both` measures the difference, `':negative` if `r1 < r2` and `#':positive` if `r2 > r1`.

*[procedure]*

`(correlation-test-two-sample-on-sequences points-1 points-2 #:tails)`

As above, but computes the correlations from given lists of points.

*[procedure]*

`(spearman-rank-correlation points)`

Returns two **values**, the Spearman Rank measure of correlation between given list of points, and the p-significance of the correlation. (This correlation is used for non-linear relations; compare with `linear-regression`.)

#### Significance test functions

*[procedure]*

`(t-significance t-value degrees-of-freedom #:tails)`

returns the probability of `t-value` for given `degrees-of-freedom`. The keyword `#:tails` modifies the calculation to be two-sided (the default) with `':both`, or one-sided, `':positive` or `':negative`.

> (t-significance 0.2 5) 0.849360513995829 > (t-significance 0.2 5 #:tails ':positive) 0.424680256997915 > (t-significance 0.2 5 #:tails ':negative) 0.575319743002086

*[procedure]*

`(f-significance f-value numerator-dof denominator-dof #:one-tailed?)`

returns the probability of `f-value` for given `numerator-dof` and `denominator-dof`. The boolean keyword `#:one-tailed?` indicates if calculation is two-sided (the default) or not.

> (f-significance 1.5 8 2) 0.920449812578091 > (f-significance 1.5 8 2 #:one-tailed? #t) 0.460224906289046

### Authors

Peter Lane wrote the Scheme version of this library. The original Lisp version was written by Larry Hunter.

### License

GPL version 3.0.

### Requirements

Needs srfi-1, srfi-25, srfi-69, vector-lib, numbers, extras, foreign, format

Uses the GNU scientific library for basic numeric processing, so requires libgsl, libgslcblas and the development files for libgsl.

### Version History

- 0.3: some error fixes and addition of tests for majority of functions
- 0.2: fixed some errors in keywords and find-critical-value
- 0.1: initial package