srfi-158
Introduction
This egg provides the reference implementation of SRFI-158.
Author
Vasilij Schneidermann
Repository
https://depp.brause.cc/srfi-158
API
Specification
Generators can be divided into two classes, finite and infinite. Both kinds of generators can be invoked an indefinite number of times. After a finite generator has generated all its values, it will return an end-of-file object for all subsequent calls. A generator is said to be exhausted if calling it will return an end-of-file object. By definition, infinite generators can never be exhausted.
A generator is said to be in an undefined state if it cannot be determined exactly how many values it has generated. This arises because it is impossible to tell by inspecting a generator whether it is exhausted. For example, (generator-fold + 0 (generator 1 2 3) (generator 1 2)) will compute 0 + 1 + 1 + 2 + 2 = 6, at which time the second generator will be exhausted. If the first generator is invoked, however, it may return either 3 or an end-of-file object, depending on whether the implementation of generator-fold has invoked it. Therefore, the first generator is said to be in an undefined state.
After passing an end-of-file object to an accumulator, it is an error to pass anything but another end-of-file object. However, end-of-file objects may be passed repeatedly, and always produce the same result.
Generator constructors
The result of a generator constructor is just a procedure, so printing it doesn't show much. In the examples in this section we use generator->list to convert the generator to a list.
These procedures have names ending with generator.
[procedure] (generator arg …)The simplest finite generator. Generates each of its arguments in turn. When no arguments are provided, it returns an empty generator that generates no values.
[procedure] (circular-generator arg1 arg2 …)The simplest infinite generator. Generates each of its arguments in turn, then generates them again in turn, and so on forever.
[procedure] (make-iota-generator count [ start [ step ] ])Creates a finite generator of a sequence of count numbers. The sequence begins with start (which defaults to 0) and increases by step (which defaults to 1). If both start and step are exact, it generates exact numbers; otherwise it generates inexact numbers. The exactness of count doesn't affect the exactness of the results.
(generator->list (make-iota-generator 3 8)) ⇒ (8 9 10) (generator->list (make-iota-generator 3 8 2)) ⇒ (8 10 12)[procedure] (make-range-generator start [ end [ step ] ])
Creates a generator of a sequence of numbers. The sequence begins with start, increases by step (default 1), and continues while the number is less than end, or forever if end is omitted. If both start and step are exact, it generates exact numbers; otherwise it generates inexact numbers. The exactness of end doesn't affect the exactness of the results.
(generator->list (make-range-generator 3) 4) ⇒ (3 4 5 6) (generator->list (make-range-generator 3 8)) ⇒ (3 4 5 6 7) (generator->list (make-range-generator 3 8 2)) ⇒ (3 5 7)[procedure] (make-coroutine-generator proc)
Creates a generator from a coroutine.
The proc argument is a procedure that takes one argument, yield. When called, make-coroutine-generator immediately returns a generator g. When g is called, proc runs until it calls yield. Calling yield causes the execution of proc to be suspended, and g returns the value passed to yield.
Whether this generator is finite or infinite depends on the behavior of proc. If proc returns, it is the end of the sequence — g returns an end-of-file object from then on. The return value of proc is ignored.
The following code creates a generator that produces a series 0, 1, and 2 (effectively the same as (make-range-generator 0 3)) and binds it to g.
(define g (make-coroutine-generator (lambda (yield) (let loop ((i 0)) (when (< i 3) (yield i) (loop (+ i 1))))))) (generator->list g) ⇒ (0 1 2)[procedure] (list->generator lis)
[procedure] (vector->generator vec [ start [ end ] ])
[procedure] (reverse-vector->generator vec [ start [ end ] ])
[procedure] (string->generator str [ start [ end ] ])
[procedure] (bytevector->generator bytevector [ start [ end ] ])
These procedures return generators that yield each element of the given argument. Mutating the underlying object will affect the results of the generator.
(generator->list (list->generator '(1 2 3 4 5))) ⇒ (1 2 3 4 5) (generator->list (vector->generator '#(1 2 3 4 5))) ⇒ (1 2 3 4 5) (generator->list (reverse-vector->generator '#(1 2 3 4 5))) ⇒ (5 4 3 2 1) (generator->list (string->generator "abcde")) ⇒ (#\a #\b #\c #\d #\e)
The generators returned by the constructors are exhausted once all elements are retrieved; the optional start-th and end-th arguments can limit the range the generator walks across.
For reverse-vector->generator, the first value is the element right before the end-th element, and the last value is the start-th element. For all the other constructors, the first value the generator yields is the start-th element, and it ends right before the end-th element.
(generator->list (vector->generator '#(a b c d e) 2)) ⇒ (c d e) (generator->list (vector->generator '#(a b c d e) 2 4)) ⇒ (c d) (generator->list (reverse-vector->generator '#(a b c d e) 2)) ⇒ (e d c) (generator->list (reverse-vector->generator '#(a b c d e) 2 4)) ⇒ (d c) (generator->list (reverse-vector->generator '#(a b c d e) 0 2)) ⇒ (b a)[procedure] (make-for-each-generator for-each obj)
A generator constructor that converts any collection obj to a generator that returns its elements using a for-each procedure appropriate for obj. This must be a procedure that when called as (for-each proc obj) calls proc on each element of obj. Examples of such procedures are for-each, string-for-each, and vector-for-each from R7RS. The value returned by for-each is ignored. The generator is finite if the collection is finite, which would typically be the case.
The collections need not be conventional ones (lists, strings, etc.) as long as for-each can invoke a procedure on everything that counts as a member. For example, the following procedure allows for-each-generator to generate the digits of an integer from least to most significant:
(define (for-each-digit proc n)
(when (> n 0)
(let-values (((div rem) (truncate/ n 10)))
(proc rem)
(for-each-digit proc div))))[procedure] (make-unfold-generator stop? mapper successor seed)
A generator constructor similar to SRFI 1's unfold.
The stop? predicate takes a seed value and determines whether to stop. The mapper procedure calculates a value to be returned by the generator from a seed value. The successor procedure calculates the next seed value from the current seed value.
For each call of the resulting generator, stop? is called with the current seed value. If it returns true, then the generator returns an end-of-file object. Otherwise, it applies mapper to the current seed value to get the value to return, and uses successor to update the seed value. This generator is finite unless stop? never returns true.
(generator->list (make-unfold-generator (lambda (s) (> s 5)) (lambda (s) (* s 2)) (lambda (s) (+ s 1)) 0)) ⇒ (0 2 4 6 8 10)
Generator operations
The following procedures accept one or more generators and return a new generator without consuming any elements from the source generator(s). In general, the result will be a finite generator if the arguments are. The names of these procedures are prefixed with g.
[procedure] (gcons* item … gen)Returns a generator that adds items in front of gen. Once the items have been consumed, the generator is guaranteed to tail-call gen.
(generator->list (gcons* 'a 'b (make-range-generator 0 2))) ⇒ (a b 0 1)[procedure] (gappend gen …)
Returns a generator that yields the items from the first given generator, and once it is exhausted, from the second generator, and so on.
(generator->list (gappend (make-range-generator 0 3) (make-range-generator 0 2))) ⇒ (0 1 2 0 1) (generator->list (gappend)) ⇒ ()[procedure] (gflatten gen)
Returns a generator that yields the elements of the lists produced by the given generator.
[procedure] (ggroup gen k [ padding ])Returns a generator that yields lists of k items from the given generator. If fewer than k elements are available for the last list, and padding is absent, the short list is returned; otherwise, it is padded by padding to length k.
[procedure] (gmerge less-than gen1 gen2 ...)Returns a generator that yields the items from the given generators in the order dictated by less-than. If the items are equal, the leftmost item is used first. When all of given generators are exhausted, the returned generator is exhausted also.
As a special case, if only one generator is given, it is returned.
[procedure] (gmap proc gen1 gen2 ...)When only one generator is given, returns a generator that yields the items from the given generator after invoking proc on them.
When more than one generator is given, each item of the resulting generator is a result of applying proc to the items from each generator. If any of input generator is exhausted, the resulting generator is also exhausted.
Note: This differs from generator-map->list, which consumes all values at once and returns the results as a list, while gmap returns a generator immediately without consuming input.
(generator->list (gmap - (make-range-generator 0 3))) ⇒ (0 -1 -2) (generator->list (gmap cons (generator 1 2 3) (generator 4 5))) ⇒ ((1 . 4) (2 . 5))[procedure] (gcombine proc seed gen gen2 …)
A generator for mapping with state. It yields a sequence of sub-folds over proc.
The proc argument is a procedure that takes as many arguments as the input generators plus one. It is called as (proc v1 v2 … seed), where v1, v2, … are the values yielded from the input generators, and seed is the current seed value. It must return two values, the yielding value and the next seed. The result generator is exhausted when any of the genn generators is exhausted, at which time all the others are in an undefined state.
[procedure] (gfilter pred gen)[procedure] (gremove pred gen)
Returns generators that yield the items from the source generator, except those on which pred answers false or true respectively.
[procedure] (gstate-filter proc seed gen)Returns a generator that obtains items from the source generator and passes an item and a state (whose initial value is seed) as arguments to proc. Proc in turn returns two values, a boolean and a new value of the state. If the boolean is true, the item is returned; otherwise, this algorithm is repeated until gen is exhausted, at which point the returned generator is also exhausted. The final value of the state is discarded.
[procedure] (gtake gen k [ padding ])[procedure] (gdrop gen k)
These are generator analogues of SRFI 1 take and drop. Gtake returns a generator that yields (at most) the first k items of the source generator, while gdrop returns a generator that skips the first k items of the source generator.
These won't complain if the source generator is exhausted before generating k items. By default, the generator returned by gtake terminates when the source generator does, but if you provide the padding argument, then the returned generator will yield exactly k items, using the padding value as needed to provide sufficient additional values.
[procedure] (gtake-while pred gen)[procedure] (gdrop-while pred gen)
The generator analogues of SRFI-1 take-while and drop-while. The generator returned from gtake-while yields items from the source generator as long as pred returns true for each. The generator returned from gdrop-while first reads and discards values from the source generator while pred returns true for them, then starts yielding items returned by the source.
[procedure] (gdelete item gen [ = ])Creates a generator that returns whatever gen returns, except for any items that are the same as item in the sense of =, which defaults to equal?. The = predicate is passed exactly two arguments, of which the first is item and the second is an element generated by gen.
(generator->list (gdelete 3 (generator 1 2 3 4 5 3 6 7))) ⇒ (1 2 4 5 6 7)[procedure] (gdelete-neighbor-dups gen [ = ])
Creates a generator that returns whatever gen returns, except for any items that are equal to the preceding item in the sense of =, which defaults to equal?. The = predicate is passed exactly two arguments, of which the first was generated by gen before the second.
(generator->list (gdelete-neighbor-dups (list->generator '(a a b c a a a d c)))) ⇒ (a b c a d c)[procedure] (gindex value-gen index-gen)
Creates a generator that returns elements of value-gen specified by the indices (non-negative exact integers) generated by index-gen. It is an error if the indices are not strictly increasing. The result generator is exhausted when either generator is exhausted, at which time the other is in an undefined state.
(generator->list (gindex (list->generator '(a b c d e f)) (list->generator '(0 2 4)))) ⇒ (a c e)[procedure] (gselect value-gen truth-gen)
Creates a generator that returns elements of value-gen that correspond to the values generated by truth-gen. If the current value of truth-gen is true, the current value of value-gen is generated, but otherwise not. The result generator is exhausted when either generator is exhausted, at which time the other is in an undefined state.
(generator->list (gselect (list->generator '(a b c d e f)) (list->generator '(#t #f #f #t #t #f)))) ⇒ (a d e)
Consuming generated values
Unless otherwise noted, these procedures consume all the values available from the generator that is passed to them, and therefore will not return if one or more generator arguments are infinite. They have names prefixed with generator.
[procedure] (generator->list generator [ k ])Reads items from generator and returns a newly allocated list of them. By default, it reads until the generator is exhausted.
If an optional argument k is given, it must be a non-negative integer, and the list ends when either k items are consumed, or generator is exhausted; therefore generator can be infinite in this case.
[procedure] (generator->reverse-list generator [ k ])Reads items from generator and returns a newly allocated list of them in reverse order. By default, this reads until the generator is exhausted.
If an optional argument k is given, it must be a non-negative integer, and the list ends when either k items are read, or generator is exhausted; therefore generator can be infinite in this case.
[procedure] (generator->vector generator [ k ])Reads items from generator and returns a newly allocated vector of them. By default, it reads until the generator is exhausted.
If an optional argument k is given, it must be a non-negative integer, and the list ends when either k items are consumed, or generator is exhausted; therefore generator can be infinite in this case.
[procedure] (generator->vector! vector at generator)Reads items from generator and puts them into vector starting at index at, until vector is full or generator is exhausted. Generator can be infinite. The number of elements generated is returned.
[procedure] (generator->string generator [ k ])Reads items from generator and returns a newly allocated string of them. It is an error if the items are not characters. By default, it reads until the generator is exhausted.
If an optional argument k is given, it must be a non-negative integer, and the string ends when either k items are consumed, or generator is exhausted; therefore generator can be infinite in this case.
[procedure] (generator-fold proc seed gen1 gen2 …)Works like SRFI 1 fold on the values generated by the generator arguments.
When one generator is given, for each value v generated by gen, proc is called as ({{proc v r)}}, where r is the current accumulated result; the initial value of the accumulated result is seed, and the return value from proc becomes the next accumulated result. When gen is exhausted, the accumulated result at that time is returned from generator-fold.
When more than one generator is given, proc is invoked on the values returned by all the generator arguments followed by the current accumulated result. The procedure terminates when any of the genn generators is exhausted, at which time all the others are in an undefined state.
(with-input-from-string "a b c d e" (lambda () (generator-fold cons 'z read))) ⇒ (e d c b a . z)[procedure] (generator-for-each proc gen gen2 …)
A generator analogue of for-each that consumes generated values using side effects. Repeatedly applies proc on the values yielded by gen, gen2 … until any one of the generators is exhausted, at which time all the others are in an undefined state. The values returned from proc are discarded. Returns an unspecified value.
[procedure] (generator-map->list proc gen gen2 …)A generator analogue of map that consumes generated values, processes them through a mapping function, and returns a list of the mapped values. Repeatedly applies proc on the values yielded by gen, gen2 … until any one of the generators is exhausted, at which time all the others are in an undefined state. The values returned from proc are accumulated into a list, which is returned.
[procedure] (generator-find pred gen)Applies pred to each item from gen. As soon as it yields a true value, the item is returned without consuming the rest of gen. If gen is exhausted, returns #f.
[procedure] (generator-count pred gen)Returns the number of items available from the generator gen that satisfy the predicate pred.
[procedure] (generator-any pred gen)Applies pred to each item from gen. As soon as it yields a true value, the value is returned without consuming the rest of gen. If gen is exhausted, returns #f.
[procedure] (generator-every pred gen)Applies pred to each item from gen. As soon as it yields a false value, the value is returned without consuming the rest of gen. If gen is exhausted, returns the last value returned by pred, or #t if pred was never called.
[procedure] (generator-unfold gen unfold arg ...)Equivalent to (unfold eof-object? (lambda (x) x) (lambda (x) (gen)) (gen) arg ...). The values of gen are unfolded into the collection that unfold creates.
The signature of the unfold procedure is (unfold stop? mapper successor seed args ...). Note that the vector-unfold and vector-unfold-right of SRFI 43 and SRFI 133 do not have this signature and cannot be used with this procedure. To unfold into a vector, use SRFI 1's unfold and then apply list->vector to the result.
;; Iterates over string and unfolds into a list using SRFI 1 unfold (generator-unfold (make-for-each-generator string-for-each "abc") unfold) ⇒ (#\a #\b #\c)
Accumulator constructors
These procedures have names ending with accumulator.
[procedure] (make-accumulator kons knil finalizer)Returns an accumulator that, when invoked on an object other than an end-of-file object, invokes kons on its argument and the accumulator's current state, using the same order as a function passed to fold. It then sets the accumulator's state to the value returned by kons and returns an unspecified value. The initial state of the accumulator is set to knil. However, if an end-of-file object is passed to the accumulator, it returns the result of tail-calling the procedure finalizer on the state. Repeated calls with an end-of-file object will reinvoke finalizer.
[procedure] (count-accumulator)Returns an accumulator that, when invoked on an object, adds 1 to a count inside the accumulator and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the count.
[procedure] (list-accumulator)Returns an accumulator that, when invoked on an object, adds that object to a list inside the accumulator in order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the list.
[procedure] (reverse-list-accumulator)Returns an accumulator that, when invoked on an object, adds that object to a list inside the accumulator in reverse order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the list.
[procedure] (vector-accumulator)Returns an accumulator that, when invoked on an object, adds that object to a vector inside the accumulator in order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the vector.
[procedure] (reverse-vector-accumulator)Returns an accumulator that, when invoked on an object, adds that object to a vector inside the accumulator in reverse order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the vector.
[procedure] (vector-accumulator! vector at)Returns an accumulator that, when invoked on an object, adds that object to consecutive positions of vector starting at at in order of accumulation. It is an error to try to accumulate more objects than vector will hold. An unspecified value is returned. However, if an end-of-file object is passed, the accumulator returns vector.
[procedure] (string-accumulator)Returns an accumulator that, when invoked on a character, adds that character to a string inside the accumulator in order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the string.
[procedure] (bytevector-accumulator)Returns an accumulator that, when invoked on a byte, adds that integer to a bytevector inside the accumulator in order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the bytevector.
[procedure] (bytevector-accumulator! bytevector at)Returns an accumulator that, when invoked on a byte, adds that byte to consecutive positions of bytevector starting at at in order of accumulation. It is an error to try to accumulate more bytes than vector will hold. An unspecified value is returned. However, if an end-of-file object is passed, the accumulator returns bytevector.
[procedure] (sum-accumulator)Returns an accumulator that, when invoked on a number, adds that number to a sum inside the accumulator in order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the sum.
[procedure] (product-accumulator)Returns an accumulator that, when invoked on a number, multiplies that number to a product inside the accumulator in order of accumulation and returns an unspecified value. However, if an end-of-file object is passed, the accumulator returns the product.
Examples
(import scheme) (import (srfi 158)) (define g (circular-generator 1 2 3)) (generator->list (gtake g 2)) ;=> (1 2) (generator->list (gtake g 2)) ;=> (3 1) (generator->list (gtake g 2)) ;=> (2 3) (define a (list-accumulator)) (a "foo") (a "bar") (a "baz") (a #!eof) ;=> ("foo" "bar" "baz")
License
Copyright (c) 2020, Vasilij Schneidermann Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Version history
0.1
- Initial release